3355/30100

8 TM 3M 7 6 5 4 3 2 1 NOTES ROUND CONDUCTOR FLAT CABLE, 3355 SERIES 1. REGULATORY INFORMATION: FOR REGULATORY INFORMATION ABOUT THIS PRODUCT, VISIT 3m.com/regs OR CONTACT YOUR 3M REPRESENTATIVE. .050" 28 AWG STRANDED, TPE UL FILE NO: E42769. STYLE NO: 20297 2. 28 AWG WIRE ON .050 INCH CENTERS PERMITS MASS TERMINATIONS TO A BROAD LINE OF IDC CONNECTORS. DIM A D DIM B .025 3. TPE INSULATION PROVIDES EXCELLENT TRANSMISSION PROPERTIES AT A LOW COST. .007 .050 0.64 .002 TYP 4. ZIPPABLE FOR BRANCHING OR DISCRETE TERMINATION. 1.27 .035 D 5 BLUE MARKING ON ONE EDGE OF CABLE DESIGNATES WIRE #1. .003 0.89 ORDERING INFORMATION 3355/XX XX 5 TPE INSULATION BLANK = STANDARD SF = SPLICE FREE 28 AWG 7 X 36 [7 X 0.127] TINNED STRANDED COPPER CONDUCTORS NUMBER OF CONDUCTORS (SEE TABLE) C NOTE: AVAILABLE IN STANDARD 100 FT [30 m] OR 300 FT [91 m] ROLLS. PLEASE SPECIFY WHEN ORDERING. CONTACT 3M FOR AVAILABILITY OF ADDITIONAL CONDUCTOR COUNTS AND/OR CUSTOM ROLL LENGTHS. PHYSICAL: INSULATION MATERIAL: THERMOPLASTIC ELASTOMER, TPE (TPO TYPE) COLOR: GRAY MARKING STANDARD: NONE TABLE 1 .010 .010 .010 .010 .015 .015 .015 .015 .015 .015 .020 .020 .020 .020 .020 .020 .020 .020 [11.43] [12.70] [17.78] [19.05] [20.32] [22.86] [25.40] [30.48] [31.75] [33.02] [38.10] [43.18] [45.72] [46.99] [50.80] [63.50] [76.20] [81.28] 0.400 0.450 0.650 0.700 0.750 0.850 0.950 1.150 1.200 1.250 1.450 1.650 1.750 1.800 1.950 2.450 2.950 3.150 .007 .007 .007 .007 .011 .011 .011 .011 .011 .011 .015 .015 .015 .015 .015 .015 .015 .015 F 0.450 0.500 0.700 0.750 0.800 0.900 1.000 1.200 1.250 1.300 1.500 1.700 1.800 1.850 2.000 2.500 3.000 3.200 DIMENSION B REVISION DIMENSION A [10.16] [11.43] [16.51] [17.78] [19.05] [21.59] [24.13] [29.21] [30.48] [31.75] [36.83] [41.91] [44.45] [45.72] [49.53] [62.23] [74.93] [80.01] ELECTRICAL: VOLTAGE RATING: USA: 300V EU: 1 X 10 /10ft. [3m] CHARACTERISTIC IMPEDANCE: CAPACITANCE: INDUCTANCE: PROPAGATION DELAY: VELOCITY OF PROPAGATION: DRAWING NUMBER 3M PART NUMBER 3355/09 3355/10 3355/14 3355/15 3355/16 3355/18 3355/20 3355/24 3355/25 3355/26 3355/30 3355/34 3355/36 3355/37 3355/40 3355/50 3355/60 3355/64 UNBALANCED 117 11.7 pF/ft [38.4 pF/m] 0.16 H/ft [0.52 H/m] 1.37 ns/ft [4.49 ns/m] 74% B NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. ENVIRONMENTAL: TEMPERATURE RATING: -40 C TO +105 C FLAMMABILITY RATING: USA: UL HORIZONTAL R F 0101541 JAN 04,2022 REDRAWN DIMENSIONS: INCH [MM] DESIGN REFERENCE INCH [MM] TOLERANCE - UNLESS NOTED .X .XX .XXX INCH .1 .05 .010 [] = DIM. FOR REFERENCE ONLY A 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect DIVISION DO NOT SCALE DRAWING 125 4 1 INCHES ALL SURFACES MARKED ONLY 5 4 3 ECO ISSUE DATE AND DESCRIPTION DRFT DATE L SCHMIDT DEC 15,2021 CHKD DATE C 3M Center MAX SURFACE ROUGHNESS 6 REV St. Paul, TOLERANCES EXCEPT AS NOTED SCALE INTERPRET PER ASME Y14.5 - 2018 7 WORK REQUEST 13221 DIVISION CODE THIRD ANGLE PROJECTION 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 8 NEXT ASSEMBLY ACCESS CODES 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES 1 LDS TRP MN 55144 DRFT MFG DATE APPVL DATE CHKD A 3M COPYRIGHT 2022 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE ROUND CONDUCTOR FLAT CABLE SERIES 3355 .050" 28AWG STRANDED CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-0317-7 DET. LISTS 1 YES NO Imaged: Central Standard Time 1/20/2022 -- UTC Offset (hrs) 6 B NUMBER OF CONDUCTORS 09 10 14 15 16 18 20 24 25 26 30 34 36 37 40 50 60 64 CONDUCTORS MATERIAL: 28 AWG, 7 X 36 [7 X 0.127] TINNED STRANDED COPPER 78-5100-0317-7 C F SHT 1 OF 2 8 7 6 5 4 3 2 1 3MTM ROUND CONDUCTOR FLAT CABLE, 3355 SERIES .050" 28 AWG STRANDED, TPE D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. C 78-5100-0317-7 F REVISION Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. DRAWING NUMBER Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Business Center Electronics Materials Solutions Division 13011 McCallen Pass, BLDG C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect B B F 0101541 JAN 04,2022 LDS TRP REDRAWN WORK REQUEST 13221 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE L SCHMIDT DEC 15,2021 CHKD DATE DIVISION CODE C 3M Center DO NOT SCALE DRAWING 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect 8 4 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2018 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 7 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES 1 MN 55144 DRFT MFG DATE APPVL DATE CHKD A 3M COPYRIGHT 2022 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE ROUND CONDUCTOR FLAT CABLE SERIES 3355 .050" 28AWG STRANDED CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-0317-7 DET. LISTS 1 YES NO Imaged: Central Standard Time 1/20/2022 -- UTC Offset (hrs) 6 C F SHT 2 OF 2