3706-5050

3M™ Accessories .100” × .100” EMI System 3705/3706 Series E D • Spring latch attachment allows quick, easy connect/ disconnect • Fits existing 3M™ connectors • Intra-cabinet grounding eliminates pigtails/ drain wires and need for grounding clamps • Cast aluminum shell offers excellent ground for EMI/ ESD • RoHS* compliant TS-0098-B Sheet 1 of 4 U Date Modified: July 18, 2008 IN Physical Shell N T Die Cast Aluminum Alloy 200 μ” [ 5.08μm ] Minimum Nickel O Stainless Steel 100 μ” [ 2.54μm ] Minimum Nickel Copper Alloy 75 μ” [ 1.91μm ] Minimum Nickel C Material: Plating: Latch Material: Plating: Cable Clamp Material: Plating: IS Receptacle D Insulation Material: Flammability Rating: Ground Plate Material: Plating: Retaining Clip Material: Plating: Glass Filled Polyester (PBT) UL 94V-0 Copper Alloy 100 μ” [ 2.54μm ] Minimum Nickel Stainless Steel 100 μ” [ 2.54μm ] Minimum Nickel * RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.  Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Accessories .100″ × .100″ EMI System 3705/3706 Series Dimensions Position A B C D E F 20 1.69 [ 42.9 ] 26 1.99 [ 50.5 ] 1.50 [ 38.1 ] 0.39 [ 9.9 ] 1.26 [ 32.0 ] 1.65 [ 41.9 ] 0.35 [ 8.9 ] 1.80 [ 45.7 ] 0.43 [ 10.9 ] 1.26 [ 32.0 ] 1.65 [ 41.9 ] 34 0.35 [ 8.9 ] 2.39 [ 60.7 ] 2.20 [ 55.9 ] 0.47 [ 11.9 ] 1.32 [ 33.5 ] 1.71 [ 43.4 ] 0.47 [ 11.9 ] 40 2.69 [ 68.3 ] 2.50 [ 63.5 ] 0.51 [ 13.0 ] 1.32 [ 33.5 ] 1.71 [ 43.4 ] 0.47 [ 11.9 ] 50 3.19 [ 81.0 ] 2.80 [ 71.1 ] 0.59 [ 15.0 ] 1.38 [ 35.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ] 60 3.69 [ 93.7 ] 3.30 [ 83.8 ] 0.67 [ 17.0 ] 1.38 [ 35.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ] For 34 position and higher the shell thickness increases to the dashed line (See table Dim F). 4X R .18 [ 4.6 ] .43 [ 10.9 ] C E D See Note 1 U .35 [ 8.9 ] A N V V V D E D IS C O V V V F T 2X (See Note 4) IN See Note 2 2X (See Note 5) B .43 [ 10.9 ] 2X (See Note 3) Notes: 1.Two Shell Halves: Aluminum Alloy Die Casting, Plating-200μ″ [ 5.0 μm ] Nickel Min. 2.One Cable Clamp: Copper Alloy, Plating 75μ″ [ 2.0 μm ] Nickel Min. 3.Two Latches: Stainless Steel, Plating 100μ″ [ 2.54 μm ] Nickel Min. 4.Two Roundhead Screws: M3 x 0.5 mm x 4 mm long. 5.Two Flathead screws: M3 x 0.5 mm x 6 mm Long. In c h [m m ] T o le ra n c e U n le s s N o te d in c h .0 .0 0 ± .1 ± .0 1 ± .0 0 5 .0 0 0 [ ] D im e n s io n s fo r R e fe re n c e O n ly Ordering Information Shell Kit 3705-A2XX Position: See Table Note: Wiremount Shell Kit to be used with respective Socket and Cable (Order Separately) 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0098-B Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Accessories .100″ × .100″ EMI System 3705/3706 Series Dimensions Position A B C D E 20 1.53 [ 38.9 ] 1.98 [ 50.3 ] 2.36 [ 59.9 ] 1.41 [ 35.8 ] 1.79 [ 45.5 ] 26 1.83 [ 46.5 ] 2.28 [ 57.9 ] 2.66 [ 67.6 ] 1.71 [ 43.4 ] 2.09 [ 53.1 ] 34 2.23 [ 56.6 ] 2.69 [ 68.3 ] 3.06 [ 77.7 ] 2.11 [ 53.6 ] 2.49 [ 63.2 ] 40 2.53 [ 64.3 ] 2.98 [ 75.7 ] 3.36 [ 85.3 ] 2.41 [ 61.2 ] 2.79 [ 70.9 ] 50 3.03 [ 77.0 ] 3.48 [ 88.4 ] 3.86 [ 98.0 ] 2.91 [ 73.9 ] 3.37 [ 85.6 ] 60 3.53 [ 89.7 ] 3.98 [ 101.1 ] 4.36 [ 110.7 ] 3.41 [ 86.6 ] 3.87 [ 98.3 ] C B E D A 2X (See Note 2) IN U 4X M3 X 0.5mm Threaded Inserts See Note 1 2X (See Note 3) .71 [ 18.0 ] T .40 Ref [ 10.2 ] (See Note 6) N 2X (See Note 4) O .37 [ 9.4 ] .70 [ 17.8 ] 2X Stop D IS C .32 [ 8.1 ] 2X (See Note 5) D E Notes: 1.One Bracket: PBT, Flammability Rating: UL 94V-0. 2.Two Ground Plates: Copper Alloy, Plating-100 μ″ [ 2.54 μm ] Nickel Min. 3.Two Retaining Clips: Stainless Steel, Plating-100 μ″ [ 2.54 μm ] Nickel Min. 4.Two Roundhead Screws: M3 x 6mm Long. 5.Two Roundhead Screws: M3 x 0.5mm x 10mm Long. (For use with Plug Connector). 6.This is the recommended distance from the inside of the panel to the front face of the Header or Plug. Ordering Information Receptacle Kit 3706-50XX Position: See Table Note: Panel Mount Receptable Kit to be used with respective Plug or Header (Order Separately). 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0098-B Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Accessories .100″ × .100″ EMI System 3705/3706 Series Dimensions Position .13 [ 3.3 ] Recommended Panel Cut Out for Receptacle Kit. .49 [ 12.4 ] R Full Typ A B 20 1.80 [ 45.7 ] 1.98 [ 50.3 ] 26 2.10 [ 53.3 ] 2.28 [ 57.9 ] 34 2.50 [ 63.5 ] 2.69 [ 68.3 ] 40 2.80 [ 71.1 ] 2.98 [ 75.7] 50 3.30 [ 83.8 ] 3.48 [ 88.5 ] 60 3.80 [ 96.5 ] 3.98 [ 101.1 ] .50 Min [ 12.7 ] IN U R .008 Typ [ 0.20 ] E D A C O N T B .75 Min [ 19.1 ] D IS R .063 Typ [ 1.60 ] For use with: (Order Separately) For use with: (Order Separately) Cable 3706 Mates with: Receptacle Kit Header Plug 3659/20 3706-5020 2520-500X 4620-6000 3399-7626 3659/26 3706-5026 2526-500X 4626-6000 3414-7634 3659/34 3706-5034 2534-500X 4634-6000 3705-A240 3417-7640 3659/40 3706-5040 2540-500X 4640-6000 50 3705-A250 3425-7650 3659/50 3706-5050 2550-500X 4650-6000 60 3705-A260 3334-7660 3659/60 3706-5060 2560-500X 4660-6000 Position 3705 Shell Kit Socket 20 3705-A220 3421-7620 26 3705-A226 34 3705-A234 40 Note: Shell and Receptacle Kits are available. They consist of a complete Shell Kit and a complete Receptacle Kit for a respective pin count. 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0098-B Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. E D In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS N T IN U Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. O In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. C Appendix E3: European Union RoHS D IS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-E Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. E D CHINA Appendix C1: China RoHS T IN U Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. O Appendix C2: China RoHS N In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. D IS C Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-E Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. Important Notice D IS C O N T IN U E D The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2008. All rights reserved. RIA-2217A-E 3M is a trademark of 3M Company.