CP2-SB095-G1-TG30

3M™ CP2 Press-Fit Socket 2 mm Type B, 95, 110, and 125 Signal Contacts, Right Angle CP2 Series • 25 mm basic system unit • 50 mm module • Designed according to IEC 61076-4-101 and IEC 60352-5 Standards • 2 mm grid spacing allows for high signal density at low cost • “Eye of the Needle” compliant pin press-fit design helps reduce manufacturing time and cost • Additional grounding row available for improved ground bounce and EMI immunity • Mates with 5 row 3M™ HM, and CP2 Headers • End-to-end stackable with 5 row 3M™ HSHM, UHM, HM, and CP2 Sockets • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: July 16, 2015  Physical TS-2268-B Sheet 1 of 2 Insulation: Material: High Temperature Thermoplastic (LCP) Flammability: UL94V-0 Contact: Material: Copper Alloy Plating: See Ordering Information Mechanical Mating Force: Withdrawl Force: Mating and Un-mating Operations: Application: ≤ 0.75N/PIN ≥ 0.15N/PIN 200 for KR plating This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101) Electrical Current Rating: Contact Resistance: Insulation Resistance: Test Voltage: 1.0 Amperes at 70°C with all contacts powered ≤ 20 mΩ ≥ 10,000 MΩ 750 VACRMS Environmental Temperature Rating: -55°C to +125°C PCB Data Recommended PCB Plated Through Hole: Drill hole diameter: Hole platings PCB thickness: Press-In Force: Retention Force: Ө 0.6±0.05 mm Ө 0.7±0.02 mm Cu 25~50 μm, Sn