M3DDA-6036R

8 TM 3M 7 6 5 4 3 2 1 NOTES IDC RIBBON CABLE SOCKET, 891 SERIES 1. ASSEMBLY TOOLS: 3MTH PRESS (OR EQUIVALENT) 3640. 3MTH LOCATOR PLATE 3443-107N. 3MTH PLATEN 3442-9. * PREASSEMBLED, PACKAGING ON SWORDS FOR EASY LOADING OF MANUAL AND SEMI-AUTOMATIC ASSEMBLY EQUIPMENT. .100" X .100" FOR .050" PITCH CABLE * "BUMPS" ARE DESIGNED TO PREVENT PREMATURE LATCH LOCKING DURING SHIPMENT. 2. REGULATORY INFORMATION: VISIT 3M.com/regs * OPTIONAL DOUBLE-SIDED ADHESIVE PULL TAB FOR EASY UNPLUGGING. IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 3 * DOUBLE-RECESSED COVER FOR CABLE TERMINATION FROM EITHER SIDE VIRTUALLY ELIMINATING THE NEED FOR SINGLE-RECESSED COVER CONNECTORS. D * MILITARY POLARIZATION, WITH OR WITHOUT CENTER BUMP. OPTIONAL STRAIN RELIEF 3 PHYSICAL: INSULATION: MATERIAL: FLAMMABILITY: COLOR: CONTACT: MATERIAL: PLATING: UNDER PLATING: WIPING AREA: WIRE ACCOMMODATION: MARKINGS: C 3 4 DUAL POLARIZATION SLOTS. SLOT #1 IS NOT PRESENT ON 10 AND 14 POSITIONS. SLOT #1 AND #2 ARE NOT PRESENT ON 8 POSITION. 5 DIMENSION MEASURED AT TIP OF PINS. 6 TAPERED PIN TIP CONFIGURATION RECOMMENDED. D 7. SEE TS-2243 FOR D891XX SERIES. GLASS FILLED POLYESTER (PBT) UL94V-0 GRAY PHOSPHOR BRONZE 50 " [1.27 m] AVG. NICKEL-OVERALL 30 " [0.76 m] AVG. GOLD 26 AND 28 AWG STRANDED 3M LOGO, ORIENTATION TRIANGLE C ELECTRICAL: CURRENT RATING: M PREASSEMBLED CONNECTOR 78-5100-0449-8 RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM TEMPERATURE RISE, 20% DERATED. REFERENCE APPROPRIATE 3M PRODUCT SPECIFICATION FOR CURRENT DERATING CURVES. 3 DRAWING NUMBER INSULATION RESISTANCE: >1 X 109 AT 500 VDC WITHSTANDING VOLTAGE: 1,000VRMS AT SEA LEVEL EVIRONMENTAL: TEMP RATING: -55 C TO +105 B B STRAIN RELIEF (ORDER SEPARATELY) 3448-891XX ORDERING INFORMATION SOCKETS 891XX-0X0X DIMENSIONS: INCHES [MM] [MM] IS REF. ONLY CONTACT QUANTITY: (SEE TABLE 1) DESIGN REFERENCE A CONTACT QUANTITY: (SEE TABLE 1) 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect POLARIZATION OPTIONS: 0 = WITHOUT CENTER BUMP 1 = WITH CENTER BUMP STRAIN RELIEF: 1 = NO STRAIN RELIEF 3 = STRAIN RELIEF PACKAGING STYLE OPTIONS: 0 = PREASSEMBLED DIVISION PULL TABS (ORDER SEPARATELY) SEE TS-0496 DO NOT SCALE DRAWING 4 1 INTERPRET PER ASME Y14.5 - 2018 6 5 4 3 ALL SURFACES MARKED ONLY 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0005 MILLIMETERS 0 .0 .00 .000 ANGLES JNC FJR REVISED AND REDRAWN REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLION APR 27,2021 CHKD DATE C 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION UL FILE NO: E68080 APR 27,2021 DIVISION CODE MAX SURFACE ROUGHNESS 7 96926 EMSD R 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 8 NEXT ASSEMBLY ACCESS CODES M MN 55144 DRFT CHKD MFG DATE APPVL DATE F. RODRIGUEZ APR 27,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE IDC RIBBON CABLE SKT, .100 X .100, CABLE PITCH .050, 891 CAGE SIZE NUMBER MODEL 891XXX DRAWING NO. REV. 78-5100-0449-8 DET. LISTS 1 YES NO M SHT 1 OF 3 Imaged: Central Standard Time 5/18/2021 -- UTC Offset (hrs) 6 OPTIONAL CENTER BUMP REVISION 1 LINE 6 ADJACENT LINES ALL LINES 28 AWG 3.00 1.75 1.25 26 AWG 3.50 2.25 1.50 A 8 7 6 5 4 3 2 1 3MTM IDC RIBBON CABLE SOCKET, 891 SERIES .100" X .100" FOR .050" PITCH CABLE TABLE 1 CONTACT QTY. 08 10 14 16 20 24 26 30 34 36 40 44 50 60 .240 DIM. "A" 6.10 .22 D 5.7 .53 .15 13.4 3.9 .64 16.3 .57 STRAIN RELIEF 14.5 DIM. "A" 0.58 0.68 0.88 0.98 1.18 1.38 1.48 1.68 1.88 1.98 2.18 2.38 2.68 3.18 DIM. "B" [14.7] [17.3] [22.4] [24.9] [30.0] [35.1] [37.6] [42.7] [47.8] [50.3] [55.4] [60.5] [68.1] [80.8] 0.42 0.52 0.72 0.82 1.02 1.22 1.32 1.52 1.72 1.82 2.02 2.22 2.52 3.02 [10.7] [13.2] [18.3] [20.8] [25.9] [31.0] [33.5] [38.6] [43.7] [46.2] [51.3] [56.4] [64.0] [76.7] D DIM. "A" ASSEMBLED HEIGHT WITH STANDARD PLASTIC STRAIN RELIEF .24 6.0 RECESSED FOR CABLE EXIT C C DIM. "B" .41 TOP VIEW OF COVER 10.5 78-5100-0449-8 M REVISION ASSEMBLED HEIGHT WITHOUT STRAIN RELIEF .20 POLARIZATION SLOT #1 DRAWING NUMBER POSITION #1 OREINTATION TRIANGLE B .53 5.1 13.5 OPTIONAL CENTER BUMP .03 0.8 B POLARIZATION SLOT #2 BRAKEAWAY TAB PREASSEMBLED VIEW .06 1.5 POSITION #1 2X OPTIONAL CENTER BUMP .11 2.8 .100 2.54 .238 M APR 27,2021 JNC FJR REVISED AND REDRAWN 6.05 .24 A 1.30 .100 2.54 POSITION #2 TYP. DIM. "B" DESIGN REFERENCE .051 6.1 .032 DIVISION DO NOT SCALE DRAWING .026 POLARIZING KEY 3435-0000 5 4 3 ISSUE DATE AND DESCRIPTION DATE CASTIGLION APR 27,2021 CHKD DATE C 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 4 1 INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 6 ECO DRFT DIVISION CODE THIRD ANGLE PROJECTION OPTIONAL: ORDER SEPARATELY MATERIAL: GRAY POLYESTER, PBT 7 REV EMSD 0.81 BOTTOM VIEW OF BODY NEXT ASSEMBLY ACCESS CODES 0.66 8 96926 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0005 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE F. RODRIGUEZ APR 27,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE IDC RIBBON CABLE SKT, .100 X .100, CABLE PITCH .050, 891 CAGE SIZE NUMBER MODEL 891XXX DRAWING NO. REV. 78-5100-0449-8 DET. LISTS 1 YES NO M SHT 2 OF 3 Imaged: Central Standard Time 5/18/2021 -- UTC Offset (hrs) 6 .14 3.6 A 8 7 6 5 4 3 2 1 3MTM IDC RIBBON CABLE SOCKET, 891 SERIES .100" X .100" FOR .050" PITCH CABLE Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. D D Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Company Electronics Materials Solutions Division 13011 McCallen Pass, Bldg. C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect C C M REVISION B .100 2.54 .30 7.6 SPACE OCCUPIED BY SOCKET MIN. 78-5100-0449-8 TYP. DRAWING NUMBER .100 2.54 TYP. A B .30 7.6 .20 5.1 MIN. MIN. SPACE FOR CABLE EXIT .14 .025 0.64 .001 SQ. 3.5 0.03 .025 A B SQUARE OR ROUND TIP SEE NOTE 5 M 96926 APR 27,2021 JNC FJR REVISED AND REDRAWN DESIGN REFERENCE .018 0.46 A SEE NOTE 6 NEXT ASSEMBLY ACCESS CODES MAX. RECOMMENDED PIN PATTERN FOR STACKED CONFIGURATIONS DIVISION DO NOT SCALE DRAWING 1 1 INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 6 DATE CASTIGLION APR 27,2021 CHKD DATE C 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 7 ISSUE DATE AND DESCRIPTION DIVISION CODE 5.84 MIN. ECO DRFT EMSD .230 8 REV 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0005 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE F. RODRIGUEZ APR 27,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE IDC RIBBON CABLE SKT, .100 X .100, CABLE PITCH .050, 891 CAGE SIZE NUMBER MODEL 891XXX DRAWING NO. REV. 78-5100-0449-8 DET. LISTS 1 YES NO M SHT 3 OF 3 Imaged: Central Standard Time 5/18/2021 -- UTC Offset (hrs) 6 B A