N7E50-M516RA-50-WF

3M™ CF Card Header CompactFlash™ Type II, Long Guides, Surface Mount 7E50 Series • Headers mate with both CompactFlash Type I and Type II cards • Polarization options for top or bottom boardmount • Extended guide rails enable accurate and easy card insertion • Single row surface mount solder tails facilitate auto placement and IR soldering • Optional 2 mm board standoff enables board population • Meets CFA standards for known compatibility and reliability • Metal brace provides stability for ejector attachment • Multiple styles of ejector available • Optional ejector can be purchased pre-assembled or separately • Optional Tape and Reel or Tray packaging for automated assembly • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) ™ Date Modified: August 16, 2010  TS-2083-G Sheet 1 of 5 Physical Insulation: Material: High Temperature Thermoplastic Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 2.03 μm [ 80 μ” ] Nickel Wiping Area: 0.38 μm [ 15 μ” ] or 0.76 μm [ 30 μ” ] Gold Solder Tails: 3.81μm [ 150 μ” ] Matte Tin or Gold Flash Marking: 3M Logo Electrical Current Rating: 0.5 A Insulation Resistance: 103Ω at 500 VDC Withstanding Voltage: 500 VAC for 1 minute Environmental Temperature Rating: -40°C to +85°C Process Rating: Maximum 260 C (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) CompactFlash is a registered trademark of Sandisk Corporation. 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ CF Card Header CompactFlash™ Type II, Long Guides, Surface Mount -B- 7E50 Series Pin Function L, Pin length Dim Pin Position Detect 3.50 mm [ .138” ] 25, 26 General Use 4.25 mm [ .167” ] All other pins Power 5.00 mm [ .197”] 1, 13, 38, 50 6.40 .252 35.00 1.378 6.40 .252 31.12 1.225 1.27 .050 -C- -A1.27 .050 0.635 .025 3.00 .118 2X 0.3175 .0125 0.3175 .0125 ±0.05 50X 0.23 .009 ±.002 0.25 [.010] A B-C D 3.00 .118 2X F 7.30 .287 L 2X 21.80 .858 10.0 VPU PAD 0.40 ±0.02 .016 ±.001 0.20 [.008] A B-C D 50X E 2X 25.10 .988 38.65 ±.25 1.521 ±.010 LOGO 3M 40.16 1.581 45.40 1.787 PIN W 49.94 1.966 G 7.90 .311 -D- 47.80 1.882 PIN X 2X 2X K E H 3.60 .142 mm (Inch) Tolerance Unless Noted 47.80 1.882 PIN Y PIN Z mm .0 .00 .000 ± .30 ± .20 ± .10 [ ] Dimensions for Reference only Note: See TS-2154 for applicable ejectors and drawings of assembled ejectors and headers. Ordering Information N7E50 - X516XX - XX - XXX M = CF I & II, 31.60 mm, Normal Type, Metal Guide N = CF I & II, 31.60 mm, Inverse Type, Metal Guide Plating Options: RA = 0.38 μm [15 μ”] Gold with matte tin tail RB = 0.76 μm [30 μ”] Gold with matte tin tail EA = 0.38 um [15 μ”] Gold with Au Flash tail EB = 0.76 um [30 μ”] Gold with Au Flash tail 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com (RIA E1 & C1 apply) Pre-assembled Ejector Option: Blank = No Ejector A = Right Dual Push Ejector (7E50-B516-05) C = Left Dual Push Ejector (7E50-B616-05) Board Standoff: 40 = None 50 = 2.00 mm [ .079” ] *Packaging Options: Blank = Standard White Polystyrene Trays WF = Tape and Reel (Automated Assembly) Note: WF option includes molded suction cap for automated pick and place TS-2083-G Sheet 2 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ CF Card Header CompactFlash™ Type II, Long Guides, Surface Mount Part Number E mm [ inch ] F mm [ inch ] G mm [ inch ] H mm [ inch ] K mm [ inch ] Pin W Pin X Pin Y Pin Z N7E50-M516XX-40 0.00 [ .000 ] 6.30 [ .248 ] 1.40 [ 0.55 ] 0.80 [ .031 ] 2.35 [ .093 ] Pin 1 Pin 25 Pin 26 Pin 50 N7E50-M516XX-50 2.00 [ .079 ] 8.30 [ .328 ] 1.40 [ .055 ] 0.80 [ .031 ] 4.35 [ .171 ] Pin 1 Pin 25 Pin 26 Pin 50 N7E50-N516XX-40 0.00 [ .000 ] 6.30 [ .248 ] 0.80 [ .031 ] 1.40 [ .055 ] 3.95 [ .156 ] Pin 50 Pin 26 Pin 25 Pin 1 N7E50-N516XX-50 2.00 [ .079 ] 8.30 [ .328 ] 0.80 [ .031 ] 1.40 [ .055 ] 5.95 [ .234 ] Pin 50 Pin 26 Pin 25 Pin 1 N7E50-H516XX-50 2.00 [ .079 ] 7.90 [ .311 ] 1.40 [ .055 ] 0.80 [ .031 ] 4.15 [ .163 ] Pin 1 Pin 25 Pin 26 Pin 50 PIN W 50X 4.52 ±0.10 .178 ±.004 2X Ø 2.30 ±0.05 .091 ±.002 2X 3.00 .118 2X Ø 1.75 ±0.03 .069 ±.001 -A- 2X 7E50 Series 4.00 .157 31.12 1.225 0.40 ±0.05 50X .016 ±.002 0.08 [.003] A-B A 15.56 .612 PIN X PIN Y 4.00 .157 2X 6.96 ±0.15 .274 ±.006 -B- 0.635 .025 40.16 ±0.05 1.581 ±.002 2X 43.60 1.717 24.80 .976 2X 2X Ø 2X PIN Z 28.10 1.106 1.35 ±.03 .053 ±.001 45.40 ±0.05 1.787 ±.002 PCB LAYOUT TS-2083-G Sheet 3 of 5 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ CF Card Header CompactFlash™ Type II, Long Guides, Surface Mount 7E50 Series Standard White Polystrene Trays (No Eject Attached) 60.5 TYP 320.0 310.0 6.5 50.5 TYP 42.5 6.75 50.5 0.8 4.25 10.0 13.0 200.0 210.0 Standard tray notes : STANDARD 1. Material: PS TRAY NOTES : 2. Packaging quantity: 1. MATERIAL: PS 1 Tray: 18 pcs 2. PACKAGING QUANTITY: 1 Carton box: 15 trays per carton (270 pcs total) 1 TRAY: 18 PCS 1 CARTON BOX: 15 TRAYS (270by PCS TOTAL) 3. Carton size: 340 mm (L) byPER 230CARTON mm (W) 255 mm (H) 4. Standard traySIZE: packaging is not suitable for suction-type pick-and-place Operations. 3. CARTON 340mm(L) BY 230mm(W) BY 255mm(H) Pick-and-place capable tray packaging is available on request. 4. STANDARD TRAY PACKAGING IS NOT SUITABLE FOR SUCTION-TYPE PICK AND PLACE Contact 3M technical service.CAPABLE TRAY PACKAGING IS AVAILABLE ON REQUEST. OPERATIONS. PICK-AND-PLACE TECHNICAL SERVICE. ejectors contact 3M technical service for dimensioned 5. For CONTACT product 3M with pre-assembled drawings. 5. FOR PRODUCT WITH PRE-ASSEMBLED EJECTORS CONTACT 3M TECHNICAL SERVICE FOR DIMENSIONED DRAWINGS. TS-2083-G Sheet 4 of 5 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ CF Card Header CompactFlash™ Type II, Long Guides, Surface Mount 7E50 Series Tape and Reel for Automated Pick and Place (No Eject Attached) 1.75 4.00 56.00 0.35 VACUUM CAP 0 .5 Ø1 2.00 3M 44.80 10.00 1.75 32.05 52.00 34.20 3M YYWW YYWW A 1.50 7.30 35.00 9.35 3.9 13.90 A 10.00 PLASTIC CAP FOR SUCTION PICK AND PLACE 11.50 SECTION A-A Notes : 1. Material: PS 2. Packaging quantity 1 Reel: 100 pcs 1 Carton: 4 reels per carton (400 pcs total) 3. Carton size: 725 mm (L) by 375 mm (W) by 320 mm (H) 4. For tape and reel packaging with removable vacuum cap for suction pick and place operations 5. For product with attached ejectors contact 3M technical service for dimensioned drawings. TS-2083-G Sheet 5 of 5 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. © 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.