P05N-050PT-D-G

3M™ Board Stacking Connector System 0.5 mm, Vertical, Surface Mount, 4, 5, & 6 mm Stack Height P05N Series U ED • 0.5 mm pitch connector system ideal for applications with limited space • Mated heights of 4, 5, & 6 mm • Bellows type contact reduces mating stress and insures reliability • “Tactile click” action assures complete mating and assures high resistance to vibration and shock • Standard tape & reel packaging • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: December 15, 2008 Physical N Insulator: TS-1092-C Sheet 1 of 4 Material: High temperature thermoplastic Flammability: UL 94V-0 TI Contact: Material: Copper Alloy Plating: N Underplating: 50 µ” [ 1.27 µm ] Nickel Wiping Area: 8 µ” [ 0.2 µm ] Gold O Solder Tails: Flash Gold Mechanical: C Durability: 50 insertion/withdrawl cycles IS Mating Forces: Maximum Insertion Force = 0.785N x no. of contacts Minimum Withdrawl Force = 0.0588N x no. of contacts Electrical D Current Rating: Voltage Rating: Insulation Resistance: Withstanding Voltage: 0.5 A per contact 60 VAC/DC 103 ΜΩ min. at 500 VDC 150 VAC for 1 minute Environmental Temperature Rating: -55°C to +85°C Processing: 260°C maximum 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Board Stacking Connector System 0.5 mm, Vertical, Surface Mount, 4, 5, & 6 mm Stack Height P05N Series N Dim C 4, 5, & 6 mm 3.05 TI Stacking Height N B 4.50 7.00 0.50 12.00 14.50 19.50 24.50 C mm (Inch) A 8.20 10.70 13.20 15.70 18.20 23.20 28.20 O # of Contacts 020 030 040 050 060 080 100 U ED Socket Tolerance Unless Noted .00 ±3 ± .13 .000 IS mm .0 D [ ] Dimensions for Reference only Ordering Information P05N - XXXST - B - G (RIA E1 & C1 apply) Contact Quantity See Table TS-1092-C Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Board Stacking Connector System 0.5 mm, Vertical, Surface Mount, 4, 5, & 6 mm Stack Height P05N Series Type Stacking Height Dim C Dim D 4 mm 5 mm 6 mm 0.95 1.95 2.95 3.3 4.3 5.3 N B 4.50 7.00 0.50 12.00 14.50 19.50 24.50 O A 8.20 10.70 13.20 15.70 18.20 23.20 28.20 D IS C # of Contacts 020 030 040 050 060 080 100 TI N B C D U ED Plug Ordering Information P05N - XXXPT - X - G Contact Quantity See Table (RIA E1 & C1 Apply) Type (see chart above) B = 4 mm stack height C = 5 mm stack height D = 6 mm stack height TS-1092-C Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Board Stacking Connector System 0.5 mm, Vertical, Surface Mount, 4, 5, & 6 mm Stack Height P05N Series Tape and Reel Information Tape I U ED Leading direction after packaging Leading direction after packaging Tape II Notes: 1) Conforms to EIAJ ET-7200B and IEC 60286-3. 2) Chamfered end of connector will face supply direction as shown. Plastic Reel: EIAJ ET-7200B Top cover tape Number of Contacts A B C D E F 20-50 Tape I 24.0 60 Tape II 32.0 - 11.5 12.0 25.4 ±-1 380 28.4 14.2 12.0 33.4 ± 1 80-100 Tape II 44.0 40.4 380 20.2 12.0 45.4 ± 1 380 C O Type N Cavity Label TI Emboss carrier tape N Taping Reel IS 4, 5, 6mm Socket = 1,500 parts/reel Maximum 4 mm Plug = 1,500 parts/reel Maximum 5, 6 mm Plug = 1,000 parts/reel Maximum V-Notch D Application Information 1) Bellows type contact with Ni Barrier and V-Notch Header side post - Ni Barriers prevents solder wicking into critical wiping area of low profile connectors - V-Notch on plug increases contact force and is more effective at breaking through foreign material and flux than flat contacts. 2) Suction pick up area for suction-type automatic mounting machines on top of plug and in socket cavity. 3) Mated Height = 4.0, 5.0, 6.0 mm 4) Effective Mated Length of Contact 1.0 mm 5) Secure boards from vibration and shock. 6) Not compatible with A type P05N Series connectors. Socket side contact 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Cross section of contact and post TS-1092-C Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS U ED Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS TI N Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. N In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. O Appendix E3: European Union RoHS IS C Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. D In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-E Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. U ED In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS TI N Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. O Appendix C2: China RoHS N In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. IS C Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. D The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-E Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. Important Notice IS C O N TI N U ED The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. D All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2008. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.