4
3
2
1
NOTES
1. DIMENSIONS ARE IN MILLIMETERS.
3MTM TWIN AXIAL CABLE, SL8800 SERIES
2. PHYSICAL:
COLOR: SILVER
MARKING:
3M (part number) 30 AWG (signal
plating) [VW1] (lot code)
EXAMPLE:
3M SL8802/04-5ODN5-00 30 AWG
SILVER TW602-1
D
D
EXAMPLE VW1:
3M SL8802/04-5FDN5-00 30 AWG
SILVER VW1 TW602-1
3. REGULATORY INFORMATION:
ROHS COMPLIANT. SEE THE
REGULATORY INFORMATION APPENDIX
(RIA) IN THE "ROHS COMPLIANCE"
SECTION OF WWW.3MCONNECTORS.COM
FOR COMPLIANCE INFORMATION
(RIA E1 & C1 APPLY)
6.75
THIS CABLE CONSTRUCTION HAS A THIN
ALUMINUM LAYER AT EACH EDGE. USER
SHOULD EVALUATE ITS USE IN THEIR
APPLICATION AND, IF NECESSARY,
INSULATING TAPE MAY BE APPLIED TO
COVER THE ALUMINUM LAYER, AS USER
DEEMS APPROPRIATE.
C
0.038
0.79
2 PLACES
C
B
SIGNAL WIRES:
30 AWG SOLID (
0.254 [.0100])
SILVER OR TIN PLATED COPPER
0.787 [.0310]
POLYOLEFIN INSULATION
4 PLACES
6. UNLESS OTHERWISE NOTED, REFERENCES
TO INDUSTRY SPECIFICATIONS ARE
INTENDED TO INDICATE SUBSTANTIAL
COMPLIANCE TO THE MATERIAL ELEMENTS
OF THE SPECIFICATION. SUCH REFERENCES
SHOULD NOT BE CONSTRUED AS A GUARANTEE
OF COMPLIANCE TO ALL REQUIREMENTS IN
A GIVEN SPECIFICATION.
GROUND WIRES:
30 AWG SOLID (
0.254 [.0100])
TIN PLATED COPPER
2 PLACES
C DENOTES CRITICAL DIMENSION.
7.
D
79896
AUG 07,2018
LDS MML
ADDED CRITICAL DIM
SYMBOLS
ADDED NOTE 7
REVISED TOLERANCE
1
HORIZONTAL FLAME
VERSION
SIGNAL WIRE
PLATING
A
SILVER
VW1 VERSION
SL8802/04-50DN5-00
DESIGN REFERENCE
NEXT ASSEMBLY
ACCESS
CODES
SL8802/04-5FDN5-00
DIVISION
TIN
SL8802/04-51DN5-00
PRODUCT SPEC.
IMPEDANCE SPEC.
PS-0105
100
SL8802/04-5GDN5-00
PS-0163
5 OHMS
95
DO NOT
SCALE
DRAWING
SCALE
25
1
5 OHMS
MAX SURFACE ROUGHNESS
125
ALL SURFACES
MARKED ONLY
3
ECO
ISSUE DATE AND DESCRIPTION
DRFT
DATE
ARM
MAR 07,2011
CHKD
DATE
M LETTNAG
JAN 24,2012
C
3M Center
INTERPRET PER
ASME Y14.5 - 2009
4
REV
DIVISION CODE
THIRD ANGLE PROJECTION
Visit http://www.3mconnectors.com
D
REVISION
5. FOIL AND INSULATOR STRIPPING
BLADE DESIGN DRAWINGS ARE
AVAILABLE UPON REQUEST.
TOOLING REFERENCE NUMBER: NU14A1
2
St. Paul,
TOLERANCES
EXCEPT AS
NOTED
INCHES
.0
.00
.000
.0000
MILLIMETERS
0
2
.0
.5
.00
.10
.000
.005
ANGLES
1
MN
55144
DRFT
MFG
DATE
APPVL
DATE
CHKD
3M COPYRIGHT 2018
This document and the information it contains are
3M property and may not be reproduced or further
distributed without 3M permission, or used or
disclosed other than for 3M authorized purposes.
All rights reserved.
TITLE
SL8802/04-5XDN5-00,
100 OHM, 30 AWG, 2PR
CAGE SIZE
NUMBER
MODEL
DRAWING NO.
REV.
78-5100-2400-9
DET.
LISTS
1
YES
NO
D
SHT 1 OF 2
Imaged: Central Standard Time 8/7/2018 -- UTC Offset (hrs) 6
0.874
DRAWING NUMBER
1.80
C
78-5100-2400-9
C
4. THE OUTER SURFACE OF THE RIBBON
CABLE HAS A METALLIC APPEARANCE,
BUT IS NOT CONDUCTIVE. THERE IS
A TRANSLUCENT POLYESTER OUTER
LAYER OVER AN ALUMINUM SHIELDING
LAYER, WHICH GIVES THIS
APPEARANCE.
3.52
1.72
+0.25
0.75
-0.00
1
2 PLACES
UL FILE NUMBER: E42769
B
A
4
3
2
1
D
D
Regulatory: For regulatory information about this product, visit 3M.com/regs
or contact your 3M representative.
Technical Information: The technical information, recommendations and other
statements contained in this document are based upon tests or experience that
3M believes are reliable, but the accuracy or completeness of such information
is not guaranteed.
D
C
78-5100-2400-9
C
REVISION
Product Use: Many factors beyond 3M's control and uniquely within user's control
can affect the use and performance of a 3M product in a particular application.
Given the variety of factors that can affect the use and performance of a
3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user's
method of application.
DRAWING NUMBER
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is
specifically stated on the applicable 3M product packaging or product literature,
3M warrants that each 3M product meets the applicable 3M product specification at
the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive
remedy is, at 3M's option, replacement of the 3M product or refund of the purchase
price.
3M Electronics Materials Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
1-800-225-5373
www.3M.com/interconnect
B
B
D
79896
AUG 07,2018
LDS MML
ADDED CRITICAL DIM
SYMBOLS
ADDED NOTE 7
REVISED TOLERANCE
1
DESIGN REFERENCE
NEXT ASSEMBLY
ACCESS
CODES
DIVISION
REV
ECO
ISSUE DATE AND DESCRIPTION
DRFT
DATE
ARM
MAR 07,2011
CHKD
DATE
M LETTNAG
JAN 24,2012
DIVISION CODE
C
3M Center
DO NOT
SCALE
DRAWING
A
SCALE
1
1
THIRD ANGLE PROJECTION
INTERPRET PER
ASME Y14.5 - 2009
MAX SURFACE ROUGHNESS
125
ALL SURFACES
MARKED ONLY
4
3
Imaged: Central Standard Time 8/7/2018 -- UTC Offset (hrs) 6
Limitation of Liability: Except where prohibited by law, 3M will not be liable for
any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted, including
warranty, contract, negligence or strict liability.
2
St. Paul,
TOLERANCES
EXCEPT AS
NOTED
INCHES
.0
.00
.000
.0000
MILLIMETERS
0
2
.0
.5
.00
.10
.000
.005
ANGLES
1
MN
55144
DRFT
MFG
DATE
APPVL
DATE
CHKD
3M COPYRIGHT 2018
This document and the information it contains are
3M property and may not be reproduced or further
distributed without 3M permission, or used or
disclosed other than for 3M authorized purposes.
All rights reserved.
TITLE
SL8802/04-5XDN5-00,
100 OHM, 30 AWG, 2PR
CAGE SIZE
NUMBER
MODEL
DRAWING NO.
REV.
78-5100-2400-9
DET.
LISTS
1
YES
NO
D
SHT 2 OF 2
A