PL130-58SC-R

PL130-58 High Speed Translator Buffer to PECL PIN CONFIGURATION FEATURES  Input clock frequency ≤266 MHz JEDEC standard Differential LVPECL output 70mA typical power supply current 300ps Max. Rise/Fall time 740ps input propagation delay LVCMOS and LVTTL Input compatible Single 2.5V ±5% or 3.3V ±10% power supply with V EE=0V Available in 8 pin SOP Green/RoHS compliant Package (TOP VIEW) DNC 1 REF-IN 2 OE 3 DNC 4 PL130-58        8 VCC 7 Q 6 QB 5 VEE SOP-8L DESCRIPTION The PL130-58 is a low cost, high performance, high speed, translator buffer that produces a pair of differential LVPECL outputs from CMOS input. Outputs are JEDEC standard LVPECL signals. The device is targeted for Backplane buffering, data distribution, Fibre Channel and many other applications. BLOCK DIAGRAM QB Input Q Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1(408) 944 -0800 • fax +1(408) 474-1000 • www.micrel.com Rev 8/25/11 Page 1 PL130-58 High Speed Translator Buffer to PECL PIN DESCRIPTIONS Name SOP-8L Type DNC 1, 4 - REF-IN 2 Input OE VEE QB Q VCC 3 5 6 7 8 Input Power Output Output Power Description Do Not Connect Reference input signal. The frequency of this signal will be reproduced at the output (after translation to PECL level). Output enable (‘1’ for enable). Internal pull-up (default is ‘1’). Power Ground. PECL Complementary output. PECL True output. Positive Power Supply. ELECTRICAL SPECIFICATIONS 1. Absolute Maximum Ratings PARAMETERS SYMBOL Supply Voltage MIN. V DD MAX. UNITS 4.6 V Input Voltage, dc VI -0.5 V DD+0.5 V Output Voltage, dc VO -0.5 V DD+0.5 V Storage Temperature TS -65 150 C Ambient Operating Temperature* TA -40 85 C Junction Temperature TJ 110 C 260 C Lead Temperature (soldering, 10s) Exposure of the device under conditions beyond t he limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the dev ice at these or any other co nditions above the operational limits noted in this specification is not implied. * Note: Operating Temperature is guaranteed by design for all parts (COMME RCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only. 2. AC Specifications PARAMETERS CONDITIONS MIN. TYP. MAX. UNITS Input Frequency 266 MHz Output Frequency 266 MHz Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1(408) 944 -0800 • fax +1(408) 474-1000 • www.micrel.com Rev 8/25/11 Page 2 PL130-58 High Speed Translator Buffer to PECL PACKAGE INFORMATION (GREEN PACKAGE COM PLIANT) 8 PIN (dimensions in mm) SOP–8L Symbol Min. Max. A 1.47 1.73 A1 0.10 0.25 B 0.33 0.51 C 0.19 0.25 D 4.80 4.95 E 3.80 4.00 H 5.80 6.20 L 0.38 1.27 e E H D A A 1 1.27 BSC C L B e ORDERING INFORM ATION For part ordering, please contact our Sales Department: 2180 Fortune Drive, San Jose, CA 95131, USA Tel: (408) 944-0800 Fax: (408) 474-1000 PART NUMBER The order number for this device is a combination of the following: Part number, Package type and Operating temperature range PL130-58 X X - R Part Number R=Tape and Reel None: Tube Package Type S=SOP Order Number PL130-58SC-R PL130-58SC Temperature Range C= Commercial (0°C to +70°C) I= Industrial (-40°C to +85°C) Marking P130-58 SC LLLLL Package Option SOP-8L - Tape and Reel SOP-8L - Tube *Note: LLLLL designates lot number Micrel Inc., reserves the right to make changes in its products or specifications, or both at any time without notice. The in formation furnished by Micrel is believed to be accurate and reliable. However, Micrel makes no guarantee or warranty concerning the accuracy of said info rmation and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or re liance upon this product. LIFE SUPPORT POLICY: Micrel’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of Micrel Inc. Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1(408) 944 -0800 • fax +1(408) 474-1000 • www.micrel.com Rev 8/25/11 Page 5