Microprocessor Supervisory
Circuit in 4-Lead SC70
ADM6384
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
ADM6384
VCC
RESET
GENERATOR
VREF
MR
RESET
GND
DEBOUNCE
05305-001
Precision power supply monitoring
31 reset threshold options: 1.58 V to 5.0 V
Four reset timeouts: 1 ms, 20 ms, 140 ms, and 1120 ms
Manual reset input
Reset output stage
Push pull active low
Guaranteed reset output valid to VCC = 1 V
Power supply glitch immunity
Specified over the −40°C to +125°C temperature range
4-lead SC70 package
Figure 1.
APPLICATIONS
Microprocessor systems
Computers
Controllers
Intelligent instruments
Portable equipment
VCC
VCC
ADM6384
MICROPROCESSOR
MR
RESET
RESET
GND
GND
05305-002
100kΩ
Figure 2
GENERAL DESCRIPTION
The ADM6384 is a supervisory circuit that monitors power supply
voltage levels in microprocessor-based systems. A power-on reset
signal is generated when the supply voltage rises to a preset
threshold level. The debounced manual reset input of the
ADM6384 can be used to initiate a reset by means of an external
push button or logic signal.
Rev. E
The device is available in a choice of 31 reset threshold options,
from 1.58 V to 5.0 V. The minimum reset timeout periods are
1 ms, 20 ms, 140 ms, and 1120 ms. Not all device options are
released for sale as standard models. See Ordering Guide for
details.
The ADM6384 is available in a 4-lead SC70 package and typically consumes only 7 μA, making it suitable for use in low
power, portable applications.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2005–2018 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADM6384
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................7
Applications ....................................................................................... 1
Circuit Description............................................................................9
Functional Block Diagrams ............................................................. 1
Reset Output ..................................................................................9
General Description ......................................................................... 1
Manual Reset Input .......................................................................9
Revision History ............................................................................... 2
Applications Information .............................................................. 10
Specifications..................................................................................... 3
Negative Going VCC Transients................................................. 10
Absolute Maximum Ratings............................................................ 5
Ensuring Reset Valid to VCC = 0 V ........................................... 10
ESD Caution .................................................................................. 5
Outline Dimensions ....................................................................... 11
Pin Configuration and Function Descriptions ............................. 6
Ordering Guide .......................................................................... 11
REVISION HISTORY
4/2018—Rev. D to Rev. E
Changes to General Description Section ...................................... 1
Added Note 2, Table 1; Renumbered Sequentially ....................... 3
Changes to Ordering Guide .......................................................... 11
6/2016—Rev. C to Rev. D
Change to Table 3 ............................................................................. 6
Updated Outline Dimensions ....................................................... 11
4/2011—Rev. B to Rev. C
Updated Outline Dimensions ....................................................... 11
Changes to Ordering Guide .......................................................... 11
7/2008—Rev. A to Rev. B
Changes to Figure 5, Figure 8, and Figure 9.................................. 7
Changes to Figure 10 ........................................................................ 8
Changes to Figure 15 ...................................................................... 11
Changes to Ordering Guide .......................................................... 11
1/2007—Rev. 0 to Rev. A
Updated Format .................................................................. Universal
Changes to Specifications Table ...................................................... 3
Updated Outline Dimensions ....................................................... 11
Changes to Ordering Guide .......................................................... 11
7/2005—Revision 0: Initial Version
Rev. E | Page 2 of 12
Data Sheet
ADM6384
SPECIFICATIONS
VCC = full operating range, TA = −40°C to +125°C, unless otherwise noted.
Table 1.
Parameter
SUPPLY
VCC Operating Voltage Range
Supply Current
RESET THRESHOLD VOLTAGE 2
ADM6384x50x
ADM6384x49x
ADM6384x48x
ADM6384x47x
ADM6384x46x
ADM6384x45x
ADM6384x44x
ADM6384x43x
ADM6384x42x
ADM6384x41x
ADM6384x40x
ADM6384x39x
ADM6384x38x
ADM6384x37x
ADM6384x36x
ADM6384x35x
ADM6384x34x
ADM6384x33x
ADM6384x32x
ADM6384x31x
ADM6384x30x
ADM6384x29x
ADM6384x28x
ADM6384x27x
ADM6384x26x
ADM6384x25x
ADM6384x24x
ADM6384x23x
ADM6384x22x
ADM6384x17x
ADM6384x16x
RESET THRESHOLD TEMPERATURE COEFFICIENT
VCC to Reset Delay
RESET THRESHOLD HYSTERESIS
RESET TIMEOUT PERIOD2
ADM6384xxD1
ADM6384xxD2
ADM6384xxD3
ADM6384xxD4
Min
Typ
Max
Unit
Test Conditions/Comments
7
6
4
3
5.5
13
11
7
6
V
µA
µA
µA
µA
VCC = 5.5 V, no load
VCC = 3.6 V, no load
VCC = 2.5 V, no load 1
VCC = 1.8 V, no load1
5.12
5.02
4.92
4.82
4.74
4.61
4.48
4.41
4.31
4.2
4.1
4.0
3.9
3.79
3.69
3.59
3.49
3.38
3.28
3.15
3.08
3.00
2.87
2.77
2.69
2.56
2.46
2.37
2.24
1.71
1.61
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
ppm/°C
µs
1
4.88
4.78
4.68
4.58
4.51
4.39
4.27
4.19
4.1
4.0
3.9
3.8
3.71
3.61
3.51
3.41
3.32
3.22
3.12
3.00
2.93
2.85
2.73
2.63
2.56
2.44
2.34
2.26
2.13
1.62
1.54
5.00
4.90
4.80
4.70
4.63
4.5
4.38
4.30
4.2
4.1
4.0
3.9
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.08
3.0
2.93
2.8
2.70
2.63
2.5
2.4
2.31
2.19
1.67
1.58
60
35
2 × VTH
1
20
140
1120
Rev. E | Page 3 of 12
mV
2
40
280
2240
ms
ms
ms
ms
VCC falling at 10 mV/µs from VTH +
100 mV to VTH − 100 mV
ADM6384
Parameter
MANUAL RESET INPUT
MR Input Threshold
VIL
VIH
MR Input Pulse Width
MR Glitch Rejection
MR Pull-Up Resistance
MR to Reset Delay
Data Sheet
Min
Typ
1
2
Unit
Test Conditions/Comments
0.3 × VCC
0.8
V
V
V
V
µs
ns
kV
ns
VCC < 4 V
VCC > 4 V
VCC < 4 V
VCC > 4 V
V
V
V
V
V
VCC ≥ 1.0 V, ISINK = 80 µA
VCC ≥ 2.5 V, ISINK = 1.2 mA
VCC ≥ 4.5 V, ISINK = 3.2 mA
VCC ≥ 2.5 V, ISOURCE = 500 µA
VCC ≥ 4.5 V, I SOURCE = 800 µA
0.7 × VCC
2.4
1
100
63
200
32
RESET OUTPUT VOLTAGE
VOL
VOH
Max
100
0.3
0.3
0.4
0.8 × VCC
0.8 × VCC
TA = 25°C only.
Not all devices are released for sale as standard models. See the Ordering Guide for details.
Rev. E | Page 4 of 12
Data Sheet
ADM6384
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter
VCC
RESET
Output Current (RESET)
Operating Temperature Range
Storage Temperature Range
θJA Thermal Impedance, SC70
Soldering Temperature
Sn/Pb
Pb-Free
Rating
−0.3 V to +6 V
−0.3 V to +6 V
20 mA
−40°C to +125°C
−65°C to +150°C
331°C/W
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
240°C, 30 sec
260°C, 40 sec
Rev. E | Page 5 of 12
ADM6384
Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
GND 1
4
VCC
3
MR
ADM6384
RESET 2
05305-003
TOP VIEW
(Not to Scale)
Figure 3. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1
2
Mnemonic
GND
RESET
3
MR
4
VCC
Description
Ground.
Active Low Reset Output. This is an active low output that is asserted whenever VCC is
below the reset threshold (VTH). It features a push pull output stage.
Manual Reset Input. This is an active low input that, when forced low for at least 1 µs,
generates a reset. It features a 52 kΩ internal pull-up.
Power Supply Voltage Being Monitored.
Rev. E | Page 6 of 12
Data Sheet
ADM6384
TYPICAL PERFORMANCE CHARACTERISTICS
1.05
10.0
9.5
1.04
VCC = 5V
8.0
ICC (µA)
7.5
7.0
6.5
VCC = 3.3V
6.0
5.5
5.0
4.5
VCC = 1.5V
4.0
–20
0
20
40
60
TEMPERATURE (°C)
80
100
120
1.02
1.01
1.00
0.99
0.98
0.97
0.96
0.95
–40
05305-004
3.5
–40
1.03
Figure 4. Supply Current vs. Temperature
–20
0
20
40
60
TEMPERATURE (°C)
80
100
05305-007
8.5
NORMALIZED RESET THRESHOLD (V)
9.0
120
Figure 7. Normalized Reset Threshold vs. Temperature
0.20
1.20
VCC = 2.9V
1.10
0.15
VOL (V)
1.05
1.00
0.10
0.95
0.90
0.05
0.85
0
20
40
60
TEMPERATURE (°C)
80
100
120
0
0
Figure 5. Normalized Reset Timeout Period vs. Temperature
2
3
4
ISINK (mA)
5
6
7
1.0
Figure 8. Output Voltage Low vs. ISINK
100
2.92
VCC = 2.9V
90
80
2.90
70
60
VOH (V)
2.88
50
40
2.86
30
20
2.84
10
0
–40
–20
0
20
40
60
TEMPERATURE (°C)
80
100
120
05305-006
VCC TO RESET OUTPUT DELAY (µs)
1
05305-008
–20
05305-009
0.80
–40
05305-005
NORMALIZED RESET TIMEOUT (ms)
1.15
Figure 6. VCC to Reset Output Delay vs. Temperature
2.82
0
0.2
0.4
0.6
ISOURCE (mA)
0.8
Figure 9. Output Voltage High vs. ISOURCE
Rev. E | Page 7 of 12
ADM6384
RESET OCCURS ABOVE CURVE
340
120
100
VTH = 4.63V
80
60
40
20
VTH = 2.93V
0
10
100
OVERDRIVE VOD (mV)
1000
320
300
280
240
220
200
180
Rev. E | Page 8 of 12
VCC = 5V
160
140
120
100
–40
Figure 10. Maximum VCC Transient Duration vs. Reset Threshold Overdrive
VCC = 3.3V
260
–20
0
20
40
60
TEMPERATURE (°C)
80
100
120
Figure 11. Manual Reset Minimum Pulse Width vs. Temperature
05305-011
MANUAL RESET TO RESET DELAY (ns)
140
05305-010
MAXIMUM VCC TRANSIENT DURATION (µs)
160
Data Sheet
Data Sheet
ADM6384
CIRCUIT DESCRIPTION
RESET OUTPUT
The ADM6384 features an active low, push pull reset output.
The reset signal is guaranteed to be logic low for VCC down to 1 V.
The reset output is asserted when VCC is below the reset threshold
(VTH) or when MR is driven low. Reset remains asserted for the
duration of the reset active timeout period (tRP) after VCC rises
above the reset threshold or after MR transitions from low to high.
Figure 12 illustrates the behavior of the reset outputs.
VCC
VCC
VTH
VTH
1V
0V
VCC
RESET
tRP
0V
tRD
05305-012
The ADM6384 provides microprocessor supply voltage supervision by controlling the microprocessor reset input. Code execution
errors are avoided during power-up, power-down, and brownout
conditions by asserting a reset signal when the supply voltage is
below a preset threshold. In addition, the ADM6384 allows supply
voltage stabilization with a fixed timeout before the reset deasserts
after the supply voltage rises above the threshold. If the user detects
a problem with the system operation, a manual reset input is
available to reset the microprocessor by means of an external
push-button, for example.
Figure 12. Reset Timing Diagram
MANUAL RESET INPUT
The ADM6384 features a manual reset input (MR) that, when
driven low, asserts the reset output. When MR transitions from
low to high, reset remains asserted for the duration of the reset
active timeout period before deasserting. The MR input has a
52 kΩ internal pull-up so that the input is always high when
unconnected. An external push-button switch can be connected
between MR and ground so that the user can generate a reset.
Debounce circuitry for this purpose is integrated on-chip. Noise
immunity is provided on the MR input, and fast, negative going
transients of up to 100 ns (typical) are ignored. A 0.1 µF capacitor
between MR and ground provides additional noise immunity.
Rev. E | Page 9 of 12
ADM6384
Data Sheet
APPLICATIONS INFORMATION
NEGATIVE GOING VCC TRANSIENTS
ENSURING RESET VALID TO VCC = 0 V
To avoid unnecessary resets caused by fast power supply transients, the ADM6384 is equipped with glitch rejection circuitry.
The typical performance characteristic shown in Figure 10 plots
VCC transient duration vs. the transient magnitude. The curves
show combinations of transient magnitude and duration for which
a reset is not generated for 4.63 V and 2.93 V reset threshold
devices. For example, with the 2.93 V threshold, a transient that
goes 100 mV below the threshold and lasts 8 µs typically does
not cause a reset, but if the transient is any greater in magnitude
or duration, a reset is generated. An optional 0.1 µF bypass
capacitor mounted close to VCC provides additional glitch
rejection.
Both active low and active-high reset outputs are guaranteed to
be valid for VCC as low as 1 V. However, by using an external
resistor with push pull configured reset outputs, valid outputs
for VCC as low as 0 V are possible. For an active low reset output,
a resistor connected between RESET and ground pulls the
output low when it is unable to sink current. Use a large resistance
such as 100 kΩ to avoid overloading the reset output when VCC
is above 1 V.
VCC
ADM6384
RESET
05305-013
100kΩ
GND
Figure 13. Ensuring Reset Valid to VCC = 0 V
Rev. E | Page 10 of 12
Data Sheet
ADM6384
OUTLINE DIMENSIONS
2.20
1.80
0.65 0.65
BSC BSC
1.35
1.15
4
1
3
2.40
1.80
2
PIN 1
INDICATOR
0.50 BSC
*0.70
0.50
0.30
0.15
SEATING
PLANE
0.18
0.10
0.30
0.10
*PACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC82
EXCEPT FOR WIDTH OF PIN 2 AS SHOWN.
03-04-2014-B
0.10 MAX
COPLANARITY
0.10
0.40
0.10
1.10
0.80
1.00
0.80
Figure 14. 4-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-4)
Dimensions shown in millimeters
ADM6384YKS x D x x -RL7
GENERIC NUMBER
ORDERING QUANTITY
RL7: 3,000 PIECE REEL
R7: 3,000 PIECE REEL RoHS COMPLIANT
TEMPERATURE RANGE
Y: –40°C TO +125°C
Z: RoHS COMPLIANT
PACKAGE CODE
KS: 4-LEAD SC70
05305-014
RESET TIMEOUT PERIOD
1: 1ms (MIN)
2: 20ms (MIN)
3: 140ms (MIN)
4: 1120ms (MIN)
RESET THRESHOLD NUMBER
(16 TO 50)
Figure 15. Ordering Code Structure
ORDERING GUIDE
Standard Models 1, 2, 3
ADM6384YKS17D3Z-R7
ADM6384YKS23D3Z-R7
ADM6384YKS29D1Z-R7
ADM6384YKS29D3Z-R7
ADM6384YKS31D1Z-R7
ADM6384YKS31D2Z-R7
ADM6384YKS39D2Z-R7
ADM6384YKS46D2Z-R7
Reset
Threshold (V)
1.67
2.31
2.93
2.93
3.08
3.08
3.9
4.63
Reset
Timeout (ms)
140
140
1
140
1
20
20
20
Temperature
Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package
Description
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
Package
Option
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
Ordering
Quantity
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
Marking
Code
N0R
N0R
N0R
N0R
N0R
N0R
N0R
N0R
Z = RoHS Compliant Part.
The ADM6384 includes many device options; however, not all options are released for sale. Released options are called standard models and are listed in the Ordering
Guide. For the most up to date list of standard models, check the Simple Reset Supervisory IC page on the Analog Devices website. Contact sales for information on
non-standard models and be aware that samples and production units have very long lead times.
3
If ordering nonstandard models, complete the ordering code shown in Figure 15 by inserting reset timeout and reset threshold suffixes.
1
2
Rev. E | Page 11 of 12
ADM6384
Data Sheet
NOTES
©2005–2018 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D05305-0-4/18(E)
Rev. E | Page 12 of 12