APT30S20BCTG

1 2 3 TO -24 7 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 1 2 3 APT30S20BCTG Pb 200V 2x45A Fully compliant with RoHS 2002/95 Directive. HIGH VOLTAGE SCHOTTKY DIODE PRODUCT APPLICATIONS • Parallel Diode • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular TO-247 Package • Low Forward Voltage • High Blocking Voltage • Low Leakage Current PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL EVAL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings Are Per Leg: TC = 25°C unless otherwise specified. APT30S20BCTG UNIT 200 Volts Maximum Average Forward Current (TC = 125°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature Case for 10 Sec. Avalanche Energy (2A, 15mH) 45 121 320 -55 to 150 300 30 °C mJ Amps STATIC ELECTRICAL CHARACTERISTICS Symbol IF = 30A VF Forward Voltage IF = 60A IF = 30A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V Fully complient with RoHS 2002/95 Directive. MIN TYP MAX UNIT .80 .91 .67 .85 Volts VR = VR Rated, TJ = 125°C 15 150 Pb APT Website - http://www.advancedpower.com 053-6032 Rev C pF 1-2005 VR = VR Rated 0.5 mA DYNAMIC CHARACTERISTICS Symbol trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A, diF/dt = -700A/µs VR = 133V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 133V, TC = 125°C Test Conditions IF = 30A, diF/dt = -200A/µs VR = 133V, TC = 25°C MIN TYP APT30S20BCTG MAX UNIT ns nC 55 190 6 100 450 9 70 960 24 - - Amps ns nC Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g .58 40 0.22 5.9 10 1.1 Torque Maximum Mounting Torque lb•in N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.6 Z JC, THERMAL IMPEDANCE (°C/W) θ 0.9 0.5 0.4 0.3 0.2 0.1 0 0.7 0.5 Note: PDM t1 t2 0.3 0.1 0.05 10-5 10-4 SINGLE PULSE Peak TJ = PDM x ZθJC + TC Duty Factor D = t1/t2 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (°C) 1-2005 0.250 °C/W Power (watts) 0.330 °C/W Case temperature (°C) 0.00518 J/°C 053-6032 Rev C 0.139 J/°C FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 100 trr, REVERSE RECOVERY TIME (ns) 120 100 80 60 40 20 0 APT30S20BCTG TJ = 125°C VR = 133V 90 IF, FORWARD CURRENT (A) TJ = 25°C 60A 30A 15A 80 70 60 50 40 30 20 10 0 0 TJ = -55°C 0.2 0.4 0.6 0.8 1 1.2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage TJ = 125°C VR = 133V TJ = 150°C TJ = 125°C 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 35 IRRM, REVERSE RECOVERY CURRENT (A) TJ = 125°C VR = 133V 1800 Qrr, REVERSE RECOVERY CHARGE (nC) 1600 1400 1200 1000 800 600 400 200 0 30 25 20 15 10 5 0 60A 60A 30A 15A 30A 15A 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.4 1.2 trr 1.0 0.8 0.6 0.4 0.2 0.0 Qrr IRRM Qrr 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 140 120 100 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 700A/µs) trr 80 60 40 20 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 2500 CJ, JUNCTION CAPACITANCE (pF) 0 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 Duty cycle = 0.5 TJ = 150°C 25 2000 1500 1000 1-2005 500 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 .3 053-6032 Rev C APT30S20BCTG Vr +18V 0V D.U.T. 30µH trr/Qrr Waveform diF /dt Adjust APT20M36BLL PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 20.80 (.819) 21.46 (.845) 3.55 (.138) 3.81 (.150) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) Common Cathode 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 053-6032 Rev C 1-2005 1.01 (.040) 1.40 (.055) Anode 1 Common Cathode Anode 2 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.