APT5010JLL
500V 41A 0.100Ω
POWER MOS 7
®
R
MOSFET
G
S D
S
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching ® losses are addressed with Power MOS 7 by significantly lowering RDS(ON) ® and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. • Lower Input Capacitance • Lower Miller Capacitance • Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25°C Pulsed Drain Current
1
SO
2 T-
27
"UL Recognized"
ISOTOP ®
• Increased Power Dissipation • Easier To Drive • Popular SOT-227 Package
D G S
All Ratings: TC = 25°C unless otherwise specified.
APT5010JLL UNIT Volts Amps
500 41 164 ±30 ±40 378 3.03 -55 to 150 300 41 35
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/°C °C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
1600
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
500 0.100 100 500 ±100 3 5
(VGS = 10V, ID = 20.5A)
Ohms µA nA Volts
9-2004 050-7018 Rev F
Zero Gate Voltage Drain Current (VDS = 500V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 400V, VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
APT5010JLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 250V ID = 41A @ 25°C RESISTIVE SWITCHING VGS = 15V VDD = 250V ID = 41A @ 25°C RG = 0.6Ω 6 INDUCTIVE SWITCHING @ 25°C VDD = 333V, VGS = 15V ID = 41A, RG = 5Ω 6 INDUCTIVE SWITCHING @ 125°C VDD = 330V, VGS = 15V ID = 41A, RG = 5Ω
MIN
TYP
MAX
UNIT
4360 895 60 95 24 50 11 13 25 3 485 455 755 530
MIN TYP MAX UNIT Amps Volts ns µC V/ns nC pF
Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy
ns
µJ
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol IS ISM VSD t rr Q rr
dv/ dt
Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage
1 2
41 164 1.3 608 11.0 8
MIN TYP MAX
(Body Diode) (VGS = 0V, IS = - 41A)
Reverse Recovery Time (IS = -41A, dl S /dt = 100A/µs) Reverse Recovery Charge (IS = -41A, dl S/dt = 100A/µs) Peak Diode Recovery
d v/ dt 5
THERMAL CHARACTERISTICS
Symbol RθJC RθJA Characteristic Junction to Case Junction to Ambient UNIT °C/W
0.33 40
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
4 Starting Tj = +25°C, L = 1.90mH, RG = 25Ω, Peak IL = 41A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS ≤ -ID41A di/dt ≤ 700A/µs VR ≤ VDSS TJ ≤ 150°C 6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.35
Z JC, THERMAL IMPEDANCE (°C/W) θ
0.30 0.25 0.20
0.9
0.7
0.5 0.15 0.10 0.05 0 0.3
Note:
PDM t1 t2 Peak TJ = PDM x ZθJC + TC Duty Factor D = t1/t2
050-7018 Rev F
9-2004
0.1 0.05 10-5 10-4
SINGLE PULSE
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1.0
Typical Performance Curves
120 100 80 60 40
APT5010JLL
15 &10V 8V 7.5V 7V
RC MODEL Junction temp. (°C) 0.0988 Power (watts) 0.230 Case temperature. (°C) 0.381F 0.0196F
ID, DRAIN CURRENT (AMPERES)
6.5V
6V 20 0 5.5V 0 5 10 15 20 25 30
90
ID, DRAIN CURRENT (AMPERES)
VDS> ID (ON) x RDS (ON)MAX. 250 µSEC. PULSE TEST @
很抱歉,暂时无法提供与“APT5010JLL”相匹配的价格&库存,您可以联系我们找货
免费人工找货