AM15JW-2412SH30Z

Click on Series name for product info on aimtec.com Series AM15JW-Z 15 Watt | DC-DC Converter FEATURES: • • • • • Ultra-Wide 4:1 input range Efficiency up to 90% Operating temperature -40°C to + 100°C Continuous Short Circuit Protection Over Current and Over Voltage Protection • • No minimum load required Remote on/off control ● Input / Output Isolation 3000VDC ● Voltage Adjustment ● Soft Start, UVLO Models Single output Model Input Voltage (V) Input Current NL max.| FL typ. (mA) Output Voltage (V) Output Current max (A) Capacitive load (μF) Efficiency (%) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 10 | 503 10 | 735 10 | 710 10 | 702 10 | 252 10 | 368 10 | 359 10 | 355 3.3 5 12 15 3.3 5 12 15 3 3 1.25 1 3 3 1.25 1 3300 3300 680 470 3300 3300 680 470 82 85 88 89 82 85 87 88 Input Voltage (V) Input Current NL max. | FL typ. (mA) Output Voltage (V) Output Current max (A) Capacitive load (μF) Efficiency (%) 9-36 9-36 9-36 18-75 18-75 18-75 10 | 735 10 | 710 15 | 702 8 | 355 8 | 347 10 | 355 ±5 ±12 ±15 ±5 ±12 ±15 ±1.5 ±0.625 ±0.5 ±1.5 ±0.625 ±0.5 ±2200 ±470 ±330 ±2200 ±470 ±330 85 88 89 88 90 88 Maximum Units AM15JW-2403SH30Z AM15JW-2405SH30Z AM15JW-2412SH30Z AM15JW-2415SH30Z AM15JW-4803SH30Z AM15JW-4805SH30Z AM15JW-4812SH30Z AM15JW-4815SH30Z Models Dual output Model AM15JW-2405DH30Z AM15JW-2412DH30Z AM15JW-2415DH30Z AM15JW-4805DH30Z AM15JW-4812DH30Z AM15JW-4815DH30Z Input Specifications Parameters Voltage range Filter Remote ON/OFF Control Under Voltage Lockout Startup time Absolute Maximum Rating Peak Input Voltage time Input Reflected Ripple Current* Transient recovery time Transient Response Deviation Nominal Typical 24 48 9-36 18-75  (Pi) Network ON: 3 ~12Vdc or Open Circuit OFF: 0 ~ 1.2Vdc or short pin 2 & 6 (idle current 2mA typical) 24, ON | OFF 8.8 | 7.6 48, ON | OFF 17.5 | 16.5 30 24 Vin 50 48 Vin 100 100 20 25% load step 250 25% load step, 3.3V single output ±5 25% load step, others ±3 VDC VDC VDC VDC ms VDC VDC ms mA p-p µs % % * The input reflected ripple current should be measured with a 12μH inductor and a 47μF input capacitor (ESR 1000 2000 Output Specifications Parameters Conditions Typical Voltage accuracy Cross regulation (Dual Output) Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Short Circuit protection Over Voltage Protection Over Current Protection Temperature coefficient ±1 ±5 1st output 25% to 100%, 2nd output 100% HL-LL 0-100% load 0-100% load, balanced load Continuous, auto-recovery 140 170 ±0.02 At 20Mhz bandwidth, single output Ripple & Noise* At 20Mhz bandwidth, dual output Voltage Adjustment Single output only *Measured with 10µF/25V MLCC on each output. General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load, 3.3V and 5V single output 100% load, others See Derating curve 270 330 -40 to +100 -55 to +125 Free air convection (30-65 LFM) Copper Tolerance ±0.5mm 29 g 1.60 x 1.00 x 0.41inches (40.64 x 25.40 x 10.41mm) >600 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity