PC1307-5R6M-RC

RoHS Power Chip Inductors Dimensions: Inches (mm) PC1307 Allied Part Number PC1307-1R5M-RC PC1307-2R2M-RC PC1307-2R7M-RC PC1307-3R3M-RC PC1307-4R7M-RC PC1307-5R6M-RC PC1307-6R8M-RC PC1307-8R2M-RC PC1307-100M-RC PC1307-120M-RC PC1307-150M-RC PC1307-180M-RC PC1307-220M-RC PC1307-270M-RC PC1307-330M-RC PC1307-390M-RC PC1307-470M-RC PC1307-560M-RC PC1307-680M-RC PC1307-820M-RC PC1307-101M-RC PC1307-121M-RC PC1307-151M-RC PC1307-181M-RC PC1307-221M-RC PC1307-271M-RC PC1307-331M-RC PC1307-391M-RC PC1307-471M-RC PC1307-561M-RC PC1307-681M-RC PC1307-821M-RC PC1307-102M-RC Q Inductance Tolerance Q Test (uh) (%) Freq. Ref (MHz) MHz 0.1V 1.5 2.2 2.7 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 271 330 391 470 560 680 820 1000 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 10,20 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 .796 .796 .796 .796 .796 .796 .796 .796 .796 .796 .796 .796 .796 20 22 24 26 25 24 24 24 22 25 28 28 40 35 35 28 24 22 24 18 25 20 20 18 15 15 15 12 12 10 10 10 10 SRF (MHz) Typ 65 50 40 38 36 28 26 24 22 20 17 16 15 11 10 9.0 7.5 7.2 7.0 6.0 5.8 5.5 4.5 4.0 3.8 3.5 3.2 2.5 2.2 2.0 1.6 1.5 1.4 RDC (mΩ) Typ 5.0 6.0 8.0 8.7 10 15 17 19 21 30 34 36 47 60 65 75 82 95 120 140 180 210 250 280 360 410 520 600 720 880 1000 1300 1600 Isat (A) Typ 20 18 16 15 13 11 10.5 9.8 9.2 8.0 7.5 7.0 6.5 5.5 5.0 4.6 4.2 3.8 3.5 3.2 3.0 2.8 2.6 2.3 2.1 1.8 1.6 1.5 1.4 1.3 1.2 1.1 1.0 Irms (A) Max. 9.5 9.0 8.2 7.5 7.0 6.5 6.0 5.8 5.6 4.8 4.5 4.2 3.6 3.3 3.1 2.9 2.7 2.5 2.3 2.1 1.9 1.8 1.6 1.5 1.3 1.2 1.2 1.0 0.9 .85 .80 .75 .65 Features • Unshielded SMD Power Inductor • High Saturation Current • Suitable for large currents • Ideal for DC-DC converter applications Electrical Inductance Range: 1.5µh to 1000µh Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: As noted Operating Temp: -40ºC ~ +125ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40�C whichever is lower. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L): HP4192A LF Impedence Analyzer (RDC): Chen Hwa 502BC (IDC): HP4284A with HP42841A or Chen Hwa 1061 + 301A (SRF): HP4286A Physical Packaging: 300 pieces per 7 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 11/1/10 www.alliedcomponents.com