RVPX-PE21614M2

SHEET 1 OF 2 DOCUMENT NO. A 2 RVPX-PE21614XX 3 4 REV. LTR WAFER #1 0.56 0.05 CONNECTOR KEEPOUT AREA PIN "g16" (2.21) 7.2 3 PLC A 4 HOLES 25-AUG-20 SEE NOTE 2 112 PLC TABLE 1 TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER): 1,3, 5, 7, 9, 11, 13, 15 REV. A (1.50 0.1) 1.80 15 PLC GROUND 3 40 PLC (12.50) BACKPLANE CONNECTOR PIN SIGNAL PAIR ax ax bx bx SIGNAL PAIR dx ex ex fx SIGNAL gx cx, fx, (ALL COMMONED) ix GROUNDS PIN "a1" (0.84) DAUGHTERCARD CONNECTOR PIN CONTACT USAGE 1.35 6 PLC cx, dx, gx, hx C TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER): 2, 4, 6, 8, 10, 12, 14, 16 DAUGHTERCARD EDGE DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN SIGNAL PAIR bx cx cx dx SIGNAL PAIR ex gx fx ax, dx, gx, (ALL COMMONED) hx ax, bx, ex, fx, ix CONTACT USAGE TOP OF MOTHERBOARD GROUNDS PC BOARD REAR TRANSITION MODULE (CONNECTOR SIDE) SCALE 5/1 0 SHEET 1 OF 2 INTERCONNECTIONS WITH BACKPLANE CONNECTOR RVPX-JE216EXX, RVPX-JE216MXX OR RVPX-JE21612XX 9.35 (0.84 0.1) C INITIAL RELEASE D 3 32 SIGNAL PAIRS OUTLINED FOR CLARITY (10.85) DATE VERSION DOCUMENT NO. 3 8 SIGNAL CONTACTS OUTLINE FOR CLARITY DESCRIPTION M NOTE: "x" DESIGNATES THE COLUMN NUMBER A REVISION RVPX-PE21614XX REVISIONS 4 3 SEE TABLE 1 FOR INTERCONNECTIONS TO BACKPLANE CONNECTOR 2 PTH CALLOUT TYPICAL HOLE n 0.38-.43 DRILL n 0.31 # .05 FINISH HOLE n 0.66 PAD 1 A FORMAT: C-U_E-I NOTES: SEE TABLE 2 FOR PART NUMBER AND FINISHES UNLESS OTHERWISE SPECIFIED HOUSING: GLASS FILLED LCP, UL94 - V0 CONTACT: Cu ALLOY POST: STAINLESS STEEL, PASSIVATED THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. PRO/ENGINEER INFORMATION N/A RELEASED / Sep. 08 2020, 11:26:06 AM DOCUMENT NO. RVPX-PE21614XX SHEET 1 OF 2 4 REV. A Pro/e Model Used: P1233-426-0008-001_ATCS .PART NEXT ASSEMBLY Drawing Name: RVPX-PE21614XX 3 LINEAR DIMENSIONS ARE IN MILLIMETERS TOLERANCES: .XXXX = # .- ANGLES= # 1 $ .XXX = # ..XX = # .13 .X = # .5 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 SPECIFICATIONS 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-PE21614M2 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD RVPX-PE21614C1 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-PE21614C2 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD MATERIAL SPEC. N/A POS QTY PART NUMBER APPROVALS PREPARED BY PROCESS SPEC. 9-3895 9-3856-5 LEGENDS: =FLAG NOTE CALL OUT REFERENCE ONLY DESIGN ACTIVITY GROUP G.PECK 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 25-AUG-20 BOARD LEVEL THIRD ANGLE PROJECTION U RIGHT-ANGLE PLUG ASSEMBLY CENTER, RVPX EVO 2, RTM DAUGHTERCARD CONNECTOR, DIFFERENTIAL SIZE C CAGE CODE 77820 SCALE: 5.0 2 NOTE AMPHENOL CORPORATION S. LANGELIER S. LANGELIER DESCRIPTION PARTS LIST DATE ENGINEER IN CHARGE DESIGN MANAGER NICKEL OVERALL DOCUMENT NO. RVPX-PE21614XX REF. REV. A SHEET 1 OF 2 NONE 1 A RVPX-PE21614M1 B COMPLIANT RVPX-PE21614XX GOLD IN CONTACT AREA SHEET 1 OF 2 PART NUMBER DOCUMENT NO. PLATING THICKNESS AND MATERIAL BY PART NUMBER REV. Eng PDM Information For Reference Only TABLE 2 REV. WAFER #1 4 SEE NOTE PAD CONTACT AREA: TYP DOCUMENT NO. A DOCUMENT NO. RVPX-PE21614XX DAUGHTERCARD EDGE SHEET 2 OF 2 2 RVPX-PE21614XX 3 4 PART MARKING AS FOLLOWS AMPHENOL 77820 'DATE CODE' 'AAO PART NUMBER' 'WORK ORDER NUMBER AS LOT NUMBER' 11.81 0.19 HOUSING D SHEET 2 OF 2 REV. A 18.40 0.10 0.98 TYP 2.69 0.1 4 PLC 5.50 REF C 3.70 C Eng PDM Information For Reference Only A REVISION 13.50 REF 10.85 REF 0 1.50 REF 1 SEE NOTE 4 P.C.B. CONTACT 10.50 # .1 1.80 REF 15 PLC SEE NOTE POST VERSION 10.00 # .1 POSITION a1 1.35 REF 6 PLC 7.20 REF B 13.50 REF A FORMAT: C-U_E-I NOTES: DOCUMENT NO. X SEE SHEET 1 THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. SIZE C RELEASED / Sep. 08 2020, 11:26:06 AM DOCUMENT NO. RVPX-PE21614XX RVPX-PE21614XX SHEET 2 OF 2 A REV. 28.68 # .1 X SHEET 2 OF 2 4 77820 SCALE: 5.0 REV. A CAGE CODE 3 2 DOCUMENT NO. RVPX-PE21614XX REF: REV. A SHEET 2 OF 2 NONE 1