AP1694AS-13

AP1694AS-13 OFFLINE, HIGH PF, HIGH EFFICIENCY DIMMABLE LED DRIVER CONTROLLER Description Pin Assignments NEW PRODUCT The AP1694AS-13 is a high performance AC-DC power factor corrector for mains dimmable LED driver applications. The device uses Pulse Frequency Modulation (PFM) technology to regulate output current while achieving high power factor and low THD. It operates as a BCM (Boundary Conduction Mode) controller which is good for EMI. (Top View) The AP1694AS-13 provides accurate constant current (CC) regulation while removing the opto-coupler and secondary control circuitry. It also eliminates the need for loop compensation circuitry while maintaining stability. It can meet the requirement of IEC6100-3-2 harmonic standard. The AP1694AS-13 features low start-up current and low operation current. It adopts valley on switching mode to achieve high efficiency. It also has rich protection features including overvoltage, short circuit, and over-temperature protection. The AP1694AS-13 provides the dimmable LED driver with a wide dimmer compatibility including leading edge and trailing edge dimmer. The AP1694AS-13 can achieve deep dimming down to 1%, while the dimming curve is compliant with the standard of NEMA SSL6. The AP1694AS-13 is available in SO-8 package. Applications  Mains Dimmable LED Lighting 1 8 VCC RI 2 7 OUT SGND 3 6 GND CS 4 5 FB SO-8 Features                 Notes: NC Primary Side Control for Output Current Regulation without Optocoupler Boundary Conduction Mode (BCM) Operation to Achieve Highefficiency High PF and Low THD (PF > 0.9, THD < 30%) High Efficiency without Dimmer Wide Range of Dimmer Compatibility Dimming Curve Compliant with NEMA SSL6 Low Start-Up Current Tight LED Current Tight LED Open Voltage Valley-Mode Switching to Minimize the Transition Loss Mosfet Driver up to 25W Easy EMI Internal Protections:  Under Voltage Lock Out(UVLO)  Leading-Edge Blanking (LEB)  Output Short Protection  Output Open Protection  Over Temperature Protection Flexible for Design with Small Form Factor and Very Low BOM Cost Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain