FL2500221

ADVANCED INFORMATION A product Line of Diodes Incorporated FL Series Quartz Crystal Legacy NKS3 Series 3.2 x 2.5mm FL Miniature Quartz Crystal Ceramic SMD 3.2 x 2.5mm Ceramic SMD Package: (Scale: none; dimensions are in mm) 3.2 ± 0.1 Recommended Land Pattern: Product Description 1.5 The 4-pad FL series seam seal devices incorporate a sub-miniature AT-cut crystal resonator housed in a standard 3.2 x 2.5mm ceramic package. 1.2 2.5 ± 0.1 1.6 These compact crystals are ideal for surface mounting in densely populated or small formfactor PCB applications. 2.1 Product Features CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. • Rugged AT-cut crystal construction 0.68 ± 0.1 • Miniature 3.2 x 2.5mm ceramic package Pin Functions: Pin • Available on tape & reel; 8mm tape, 3000 units per reel 1.2 1.0 • Pb-free and RoHS/Green compliant 1 Typical Applications 2 • GSM, CDMA, GPRS 0.9 Function 1 Xtal 2 Case 3 Xtal 4 Case 0.7 • PCMCIA Cards • Portable / hand-held PCs 3 4 • Notebook PC 0.1 • HDD • GPS Part Ordering Information: • Bluetooth FL XXX YYYY • Wireless LAN • UWB A: Product�Family B: XXX = Frequency�Code C: YYYY = Specification�Code • ZigBee • Digital Tuner Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. © Diodes Incorporated FL SERIES Document Number DS40067 Rev 2 • US: +1-408-232-9100 TW: +886-3-4518888   •   www.diodes.com All specifications are subject to change without notice. 1 August 2017 © Diodes Incorporporated Miniature Quartz Crystal Ceramic SMD FL FL Series Quartz Crystal Legacy NKS3 Series | 3.2 x 2.5mm A product Line of Diodes Incorporated Frequency Range: Mechanical • 8 MHz to 66.0000 MHz (Fundamental) •Shock: JESD22-B104 Condition B •Solderability: J-STD-002 Characteristics at 25°C ±2°C: • Frequency Calibration Tolerance: ±10ppm, ±20ppm, or ±30ppm •Terminal Strength: MIL-STD-883 Method 2004 • Load Capacitance: 8 to 32pF or Series Resonance •Solvent Resistance: JESD22-B107 •Vibration: JESD22-B103 • Effective Series Resistance (ESR): •Resistance to Soldering Heat: J-STD-020C Table 5-2 Pb-free devices (3 cycles max) 500Ω max (8 to 11.9 MHz) 80Ω max (12 to 19.9 MHz) 60Ω max (20 to 29.9 MHz) 40Ω max (30 to 66 MHz) • Drive Level: 10µW typ. (100µW max) Environmental •Gross Test Leak: JESD22-A109, Condition C •Fine Test Leak: JESD22-A109, Condition A1 •Moisture Resistance: JESD22-A113 • Shunt Capacitance: 5pF Max •Insulation Resistance: 500 MΩ min (100 VDC) Temperature Range: • Operating: –20 to +70°C or –40 to +85°C or –40 to +125°C • Storage: –55 to +125°C Temperature Stability: •±10ppm, ±20ppm, ±30ppm, or ±50ppm (–20 to +70°C) •±30ppm, or ±50ppm (–40 to +85°C) •±50ppm, or ±70ppm (–40 to 125°C) Aging at 25°C, First Year: • ±3ppm Max Reflow Temperature: • 260°C Max, 10 seconds Max Legacy Ordering Information - For Reference Only: NKS 3 NAD 1 – 25.0000 –20 (T) SaRonix Series Designator NKS = 4 pad seam seal Packing Method (T) = Tape & Reel, full reel increments only, 3000pcs Blank = Bulk Package Type 3 (3.2 x 2.5 mm typ) Load Capacitance –XX = Load Capacitance Calibration / Stability / Temp Range HAA = ±10 ppm / ±10 ppm / -20°C to +70°C JAB = ±20 ppm / ±20 ppm / -20°C to +70°C NAD = ±30 ppm / ±30 ppm / -20°C to +70°C NAK = ±30 ppm / ±50 ppm / -20°C to +70°C NED = ±30 ppm / ±30 ppm / -40°C to +85°C NEK = ±30 ppm / ±50 ppm / -40°C to +85°C Part Number Example: Frequency Frequencies (in MHz) = xx.xxxx Mode 1 = Fundamental Spec: Freq 18.1234MHz, ±30ppm calib, ±30ppm stab, -20 to +70°C, 16pF, T&R = NKS3NAD1-18.1234-16(T) © Diodes Incorporated FL SERIES Document Number DS40067 Rev 2 • US: +1-408-232-9100 TW: +886-3-4518888   •   www.diodes.com All specifications are subject to change without notice. 2 August 2017 © Diodes Incorporporated