BLP05N08G-B

BLP05N08G Step-Down Converter , 1．Description BLP05N08G, the N-channel Enhanced Power MOSFETs, is obtained by advanced double trench technology which reduce the conduction loss, improve switching performance and enhance the avalanche energy. This is suitable device for motor drivers and high speed switching applications. KEY CHARACTERISTICS Parameter Value Unit V DSS 85 V ID 120 A mΩ R DS(on).typ 4.4 FEATURES  Fast Switching  Low On-Resistance ( RDS(on)≤5mΩ )  Low Gate Charge  Low Reverse transfer capacitances  High avalanche ruggedness  RoHS product APPLICATIONS  Switching applications  Motor drivers ORDERING INFORMATION Ordering Codes Package TO-263 TO-220 Product Code Packing BLP05N08G-B TO-263 P05N08G Reel BLP05N08G-P TO-220 P05N08G Tube BLP05N08G-B XXXX：Product Code (2) Package type (1) Chip name (1) BLP05N08G：5mΩ/85V (2) B：TO-263 P：TO-220 BLP05N08G Rev1.0 6/2020 XXXX YYWW ZZ SSSSS YYWW：Year&Week ZZ：Assembly Code SSSSS：Lot Code www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G Step-Down Converter 2．ABSOLUTE RATINGS , at TC=25°C，unless otherwise specified Symbol Parameter V DSS ID I DM Note1 V GS E AS Note2 PD T J ，T stg TL Rating Units 85 V Continuous Drain Current, Silicon Limited 138 A Continuous Drain Current, Package Limited 120 A Continuous Drain Current @T C =100°C, Silicon Limited 87.4 A Pulsed Drain Current 480 A Gate-Source Voltage ±20 V Avalanche Energy 156 mJ Power Dissipation 173.6 W Derating Factor above 25°C 1.39 W/℃ 150，–55 to 150 ℃ 260 ℃ Drain-Source Voltage Operating Junction and Storage Temperature Range Maximum Temperature for Soldering Note1：Repetitive Rating：Pulse width limited by maximum junction temperature Note2：L=0.5mH, Ias=25A, Start TJ =25℃ 3．Thermal characteristics Symbol Parameter Max Units R θJC R θJA thermal resistance, Junction-Case 0.72 ℃/W thermal resistance, Junction-Ambient 62.5 ℃/W 4．Electrical Characteristics at TC=25°C, unless otherwise specified OFF Characteristics Symbol Parameter Test Conditions V DSS Drain-Source Breakdown Voltage Values Units Min Typ Max V GS =0V, I D =250µA 85 -- -- V V DS =85V, V GS =0V -- -- 1 µA V DS =68V, V GS =0V @T C =125°C -- -- 100 µA I DSS Drain-Source Leakage Current I GSS(F) I GSS(R) Gate-Source Forward Leakage V GS =+20V -- -- 100 nA Gate-Source Reverse Leakage V GS =-20V -- -- -100 nA BLP05N08G Rev1.0 6/2020 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G Step-Down Converter ON Characteristics Symbol , Parameter Test Conditions Drain-Source On-Resistance R DS(on) Gate Threshold Voltage V GS(th) Pulse width tp≤300µs, δ≤2% V GS =10V, I D =50A V DS =V GS , I D =250µA Values Min Typ Max Unit s -- 4.4 5 mΩ 2.0 3.0 4.0 V Dynamic Characteristics Symbol Parameter C iss C oss C rss Qg Q gs Q gd Input Capacitance Test Conditions Output Capacitance Reverse Transfer Capacitance Total Gate Charge V DS =40V, V GS =0, f=1MHz V DD =40V, I D =50A, V GS =10V Gate-Source charge Gate-Drain charge Values Min Typ Max -- 4021 -- -- 637 -- -- 17 -- -- 80 -- -- 23 -- -- 24 -- Units pF nC Switching Characteristics Symbol Parameter t d(on) tr t d(off) tf Turn-On Delay Time Test Conditions V DD =40V, I D =50A, V GS =10V, R G =3Ω, Resistive Load Rise Time Turn-Off Delay Time Fall Time Values Min Typ Max -- 22 -- -- 42 -- -- 48 -- -- 25 -- Units ns Source-Drain Diode Characteristics Symbol Parameter IS I SM V SD T rr Q rr BLP05N08G Rev1.0 6/2020 Test Conditions Values Units Min Typ Max Continuous Source Current -- -- 120 A Maximum Pulsed Current -- -- 480 A Diode Forward Voltage V GS =0V, I S =50A -- -- 1.2 V Reverse Recovery Time I s =20A， di/dt=100A/us -- 60 -- ns -- 136 -- uC Reverse Recovery Charge www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G 5. Characteristics Curves Step-Down Converter , Figure 2. Maximum Power Dissipation vs Case Temperature Figure 1. Safe Operating Area Figure 3. Maximum Continuous Drain Current vs Case Temperature BLP05N08G Rev1.0 6/2020 Figure 4. Typical Output Characteristics www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G Step-Down Converter Figure 5. Transient Thermal Impedance Figure 6. Typical Transfer Characteristics BLP05N08G Rev1.0 6/2020 Figure 7. Source-Drain Diode Forward Characteristics www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved , BLP05N08G Step-Down Converter Figure 8. Drain-Source On-Resistance vs Drain Current Figure 10. Normalized Threshold Voltage vs Junction Temperature BLP05N08G Rev1.0 6/2020 Figure 9. Normalized On-Resistance vs Junction , Temperature Figure 11. Normalized Breakdown Voltage vs Junction Temperature www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G Step-Down Converter Figure 12. Capacitance Characteristics BLP05N08G Rev1.0 6/2020 Figure 13. Typical Gate Charge vs Gate-Source , Voltage www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G Step-Down Converter 6. Test Circuit and Waveform Figure 14. Resistive Switching Test Circuit Figure 15. Resistive Switching Waveforms Figure 16. Gate Charge Test Circuit Figure 17. Gate Charge Waveforms BLP05N08G Rev1.0 6/2020 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved , BLP05N08G Step-Down Converter Figure 18. Diode Reverse Recovery Test Circuit Figure 19. Diode Reverse Recovery Waveform Figure 20. Unclamped Inductive Switching Test Circuit Figure 21. Unclamped Inductive Switching Waveform BLP05N08G Rev1.0 6/2020 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved , BLP05N08G 7. Package Description Items A B B1 C D E F G H K L1 L2 I Q R N Step-Down Converter , Values(mm) MIN 9.80 8.90 0 4.40 1.16 0.70 0.30 1.07 1.30 0.95 14.50 1.60 0 0° 0.4 2.39 MAX 10.40 9.50 0.10 4.80 1.37 0.95 0.60 1.47 1.80 1.37 16.50 2.30 0.2 8° 0.4 2.69 TO-263 Package BLP05N08G Rev1.0 6/2020 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G Step-Down Converter , Items A B B1 C C1 D E F G H L N Q ΦP Values(mm) MIN 9.60 15.0 8.90 4.30 2.30 1.20 0.70 0.30 1.17 2.70 12.6 2.34 2.40 3.50 MAX 10.6 16.0 9.50 4.80 3.10 1.40 0.90 0.60 1.37 3.80 14.8 2.74 3.00 3.90 TO-220 Package BLP05N08G Rev1.0 6/2020 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved BLP05N08G Step-Down Converter NOTE: , 1. Exceeding the maximum ratings of the device in performance may cause damage to the device, even the permanent failure, which may affect the dependability of the machine. Please do not exceed the absolute maximum ratings of the device when circuit designing. 2. When installing the heat sink, please pay attention to the torsional moment and the smoothness of the heat sink. 3. MOSFETs is the device which is sensitive to the static electricity, it is necessary to protect the device from being damaged by the static electricity when using it. 4. Shanghai Belling reserves the right to make changes in this specification sheet and is subject to change without prior notice. CONTACT: 上海贝岭股份有限公司（总部） 地址：上海市宜山路 810 号 邮编：200233 电话：021-24261000 产品业务咨询及技术支持 电话：021-24261326 传真：021-64852222 邮箱：marketing@belling.com.cn 上海贝岭深圳分公司（华南区） 地址：深圳市福田中心区民田路新华保险大厦 1510 室 邮编：518031 电话：0755-33336776 0755-33336770 传真：0755-33336788 上海贝岭北京办事处（华北区） 地址：北京市西城区新华里 16 号院锦官苑小区 10 号楼 1 单元 1505 室 邮编：100044 电话：010-64179374 传真：010-8835 9236 BLP05N08G Rev1.0 6/2020 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved