SMBJ51A

BL FEATURES GALAXY ELECTRICAL SM BJ5.0 - - - SM BJ18 8CA BREAKDOWN VOLTAGE: 5.0 --- 188 V PEAK PULSE POWER: 600 W TRANSIENT VOLTAGE SUPPRESSOR Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop Circuit Protection Low profile package with built-in strain relief for surface mounted applications Glass passivated junction Low incremental surge resistance, excellent clamping capability 600W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% Very fast response time High temperature soldering guaranteed: 250°C/10 seconds at terminals DO-214AA(SMB) MECHANICAL DATA Case:JEDEC DO-214AA molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, method 2026 Polarity: Foruni-directional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Weight: 0.003 ounces, 0.093 grams Flammability: Epoxy is rated UL 94V-0 inch(mm) Devices for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL Peak pow er dissipation w ith a 10/1000μs w aveform (NOTE 1,2, FIG.1) VALUE Minimum 600 See Table Below UNIT W A PPPM IPPM Peak pulse current w ith a 10/1000μs w aveform (NOTE 1) Peak forw ard surge current, 8.3ms single half sine-w ave ffff uni-directional only( (NOTE 2) Typical thermal resistance, junction to ambient( (NOTE 3) Typical thermal resistance, junction to lead Operating junction and storage temperature range NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2. (2) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) c opper pads to each terminal. (3) Mounted on minimum recommended pad lay out. IFSM RθJA RθJL TJ, TSTG 100.0 100.0 20 -55---+150 A /W /W www.galaxycn.com Document Number 0285006, BLGALAXY ELECTRICAL 1. ELECTRICAL CHARACTERISTICS Device Type Modified "J" Bend Lead +SMBJ5.0 +SMBJ5.0A +SMBJ6.0 +SMBJ6.0A +SMBJ6.5 +SMBJ6.5A +SMBJ7.0 +SMBJ7.0A +SMBJ7.5 +SMBJ7.5A +SMBJ8.0 +SMBJ8.0A +SMBJ8.5 +SMBJ8.5A +SMBJ9.0 +SMBJ9.0A +SMBJ10 +SMBJ10A +SMBJ11 +SMBJ11A +SMBJ12 +SMBJ12A +SMBJ13 +SMBJ13A +SMBJ14 +SMBJ14A +SMBJ15 +SMBJ15A +SMBJ16 +SMBJ16A +SMBJ17 +SMBJ17A +SMBJ18 +SMBJ18A +SMBJ20 +SMBJ20A +SMBJ22 +SMBJ22A +SMBJ24 +SMBJ24A +SMBJ26 +SMBJ26A +SMBJ28 +SMBJ28A +SMBJ30 Device Marking Code Uni KD KE KF KG KH KK KL KM KN KP KQ KR KS KT KU KV KW KX KY KZ LD LE LF LG LH LK LL LM LN LP LQ LR LS LT LU LV LW LX LY LZ MD ME MF MG MH Bi KD KE KF KG AH AK KL KM AN AP AQ AR AS AT AU AV AW AX KY KZ BD BE LF LG BH BK BL BM LN LM LQ LR BS BT LU LV BW BX BY BZ CD CE MF MG CH Ratings at 25 ambient tem perature unless otherwise specif ied.V F =3.5V at I F =50A (uni-directional only ) Breakdow n Voltage V (BR) at IT(1) (V ) Min 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 Max 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 Test Current IT(m A) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off V oltage V W M (V ) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 Maximum Maximum Maximum Clamping Reverse Leakage Peak Pulss Surge Current IPPM V oltage at IPPM at V W M ID( A ) (3) (A ) (2) V c (V ) 800 800 800 800 500 500 200 200 100 100 50 50 20 20 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 62.5 65.2 52.6 58.3 48.8 53.6 45.1 50.0 42.0 46.5 40.0 44.1 37.7 41.7 35.5 39.0 31.9 35.3 29.9 33.0 27.3 30.2 25.2 27.9 23.3 25.9 22.3 24.6 20.8 23.1 19.7 21.7 18.6 20.5 16.8 18.5 15.2 16.9 14.0 15.4 12.9 14.3 12.0 13.2 11.2 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 36.8 1.0 30 5.0 12.4 +SMBJ30A MK CK 33.3 48.4 Notes: ( 1) Pulse test :tP 50ms www.galaxycn.com (2) Surge current w aveform per Fig.3 and derate per Fig.2 ( 3) For bi-directional types having V W M of 10 Volts and less,the ID Iimit is doubled (4) All terms and symbols are consistent w ith ANSI/IEEE C62.35 +Underw riters Laboratory Recognition for the classification of protectors (QV G2) under the UL standard for saf ety 497B and f ile number E239431 f or both uni-directional and bi-directional devices Document Number 0285006 BLGALAXY ELECTRICAL 2. ELECTRICAL CHARACTERISTICS Device Type Modified "J" Bend Lead Device Marking Code Uni Bi R atings at 25 ambient temperature unless otherwise specif ied.VF =3.5V at I F=50A (uni-directional only ) Breakdow n Voltage V (BR) at IT(1) (V) Min Max Test Current IT(m A) Stand-off Voltage V WM (V) Maximum Maximum Reverse Leakage Peak Pulss Surge at V WM Current IPPM ID( A)(3) (A)(2) Maximum Clamping Voltage at IPPM Vc (V) 5.0 44.9 1.0 33 10.2 +SMBJ33 ML CL 36.7 59.0 40.6 33 5.0 1.0 11.3 +SMBJ33A MM CM 36.7 53.3 5.0 36 48.9 1.0 9.3 +SMBJ36 MN CN 40.0 64.3 5.0 36 44.2 1.0 10.3 +SMBJ36A MP CP 40.0 58.1 5.0 40 54.3 1.0 8.4 +SMBJ40 MQ CQ 44.4 71.4 5.0 49.1 1.0 40 9.3 +SMBJ40A MR CR 44.4 64.5 58.4 1.0 43 5.0 7.8 +SMBJ43 MS CS 47.8 76.7 5.0 52.8 1.0 43 8.6 +SMBJ43A MT CT 47.8 69.4 5.0 61.1 1.0 45 7.5 +SMBJ45 MU MU 50.0 80.3 1.0 45 55.3 8.3 5.0 +SMBJ45A MV MV 50.0 72.7 48 65.1 5.0 7.0 1.0 +SMBJ48 MW MW 53.3 85.5 58.9 1.0 48 5.0 7.8 +SMBJ48A MX MX 53.3 77.4 1.0 5.0 51 69.3 6.6 +SMBJ51 MY MY 56.7 91.1 62.7 51 5.0 7.3 1.0 +SMBJ51A MZ MZ 56.7 82.4 73.3 54 5.0 6.2 1.0 +SMBJ54 ND ND 60.0 96.3 66.3 1.0 6.9 5.0 54 +SMBJ54A NE NE 60.0 87.1 5.8 78.7 1.0 5.0 58 +SMBJ58 NF NF 64.4 103 58 5.0 6.4 71.2 1.0 +SMBJ58A NG NG 64.4 93.6 5.6 81.5 1.0 60 5.0 +SMBJ60 NH NH 66.7 107 73.7 1.0 60 5.0 6.2 +SMBJ60A NK NK 66.7 96.8 5.3 64 5.0 86.9 1.0 +SMBJ64 NL NL 71.1 114 5.8 5.0 78.6 1.0 64 +SMBJ64A NM NM 71.1 103 1.0 70 5.0 95.1 4.8 +SMBJ70 NN NN 77.8 125 86.0 1.0 5.0 5.3 70 +SMBJ70A NP NP 77.8 113 102 1.0 75 5.0 4.5 +SMBJ75 NQ NQ 83.3 134 92.1 5.0 1.0 75 5.0 +SMBJ75A NR NR 83.3 121 1.0 78 5.0 106 4.3 +SMBJ78 NS NS 86.7 139 95.8 1.0 78 5.0 4.8 +SMBJ78A NT NT 86.7 126 85 115 1.0 5.0 4.0 +SMBJ85 NU NU 94.4 151 104 1.0 85 5.0 4.4 +SMBJ85A NV NV 94.4 137 122 1.0 90 5.0 3.8 +SMBJ90 NW NW 100 160 111 1.0 4.1 90 5.0 +SMBJ90A NX NX 100 146 136 1.0 100 5.0 3.4 +SMBJ100 NY NY 111 179 123 1.0 100 5.0 3.7 +SMBJ100A NZ NZ 111 162 149 1.0 110 5.0 3.1 +SMBJ110 PD PD 122 196 135 1.0 110 5.0 3.4 +SMBJ110A PE PE 122 177 163 1.0 120 5.0 2.8 +SMBJ120 PF PF 133 214 147 1.0 120 5.0 3.1 +SMBJ120A PG PG 133 193 176 1.0 130 5.0 2.6 +SMBJ130 PH PH 144 231 159 1.0 130 5.0 2.9 +SMBJ130A PK PK 144 209 204 1.0 150 5.0 2.2 +SMBJ150 PL PL 167 268 185 1.0 150 5.0 2.5 +SMBJ150A PM PM 167 243 218 1.0 160 5.0 2.1 +SMBJ160 PN PN 178 287 197 1.0 160 5.0 2.3 +SMBJ160A PP PP 178 259 231 1.0 170 5.0 2.0 +SMBJ170 PQ PQ 189 304 209 1.0 170 5.0 2.2 +SMBJ170A PR PR 189 275 255 1.0 188 5.0 1.7 +SMBJ188 PT PT 209 344 231 1.0 188 5.0 2.0 +SMBJ188A PS PS 209 328 Notes: (1) Pulse test :tP 50ms www.galaxycn.com (2) Surge current w aveform per Fig.3 and derate per Fig.2 (3) For bi-directional types having V WM of 10 Volts and less,the ID Iimit is doubled (4) All terms and symbols are consistent w ith ANSI/IEEE C62.35 (5) For the bidirectional SMBG/SMBJ5.0CA, the maximum V (BR) is 7.25V +Underw riters Laboratory Recognition for the classification of protectors (QVG2) under the UL standard for safety 497B and file number E239431 f or both uni-directional and bi-directional devices Document Number 0285006 BLGALAXY ELECTRICAL 3. RATINGS AND CHARACTERISTIC CURVES FIG.1 -- PEAK PULSE POWER RATING CURVE PEAK PULSE POWER P(PP)OR CURRENT DERATING IN PERCENTAGE, % 100 SMBJ5.0 - - -SMBJ188CA FIG.2 -- PULSE DERATING CURVE 100 PPPM, PEAK PULSE POWER, KW NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG.3 TA=25 75 10 50 1.0 0.2 x 0.2" (0.5 x 0.5mm) Copper Pad Areas 25 (I PPM) 0.1 0.1μs 0 1.0μs 10μs 100μs 1ms 10ms 0 25 50 75 100 125 150 175 200 td, PULSE WIDTH, SEC. TA, AMBIENT TEMPERATURE. FIG.3 -- PULSE WAVEFORM 150 FIG.4 -- TYPICAL JUNCTION CAPACITANCE H HHHHHHH UNIDIRECTIONAL 6,000 CJ, JUNCTION CAPACITANCE, pF IPPM , PEAK PULSE CURRENT, % tr=10 sec PEAK VALUE I PPM 100 PULES WIDTH (td) is DEFINDE as the POINT WHERE the PEAK CURRENT DECAYS to 50% of I PPM Measured at Zero Bias 1,000 50 HALF VALUE - I PPM 2 10/1000¦ Μ sec. WAVEFORM as DEFINED by R.E.A. 100 VR, Measured at Stand-Off Voltage, VWM td 0 0 1.0 2.0 3.0 4.0 TJ=25 f=1.0MHZ Vsig=50mVp-p 10 1.0 10 100 200 t, TIME, ms V(BR), BREAKDOWN VOLTAGE, V FIG.5 -- TYPICAL TRANSIENT THERMAL IMPEDANCE IFSM, PEAK FORWARD SURGE CURRENT, A FIG.6 -- MAXIMUM NON-REPETITIVE PEAK FORWARD HHHH HSURGE CURRENT TRANSLENT THERMAL IMPEDANCE 1000 200 TJ=TJ max. 8.3ms SINGLE HALF SINE-MAVE (JEDEC METHOD) 100 100 /W ) 50 10 ( 1 0.001 10 0.01 0.1 1 10 100 1000 1 10 100 tp — PULSE DURATION, SEC NUMBER OF CYCLES AT 60 Hz www.galaxycn.com Document Number 0285006 BLGALAXY ELECTRICAL 4.