T
GRADE
■ Compliant with AEC-Q200 Rev-D -
■ Higher hold currents at elevated
Stress Test Qualification for Passive
Components in Automotive Applications
AE
C-
*
Q2 RoH
00 S
CO an
M d
PL
IA
N
Features
AUTOMOTIVE
temperatures
■ RoHS compliant*
■ Small footprint size (1210)
■ Agency recognition:
■ Operating temperature range up to 125 °C
■ Low thermal derating factor
MF-USHT Series - PTC Resettable Fuses
Electrical Characteristics
Ihold
Model
Vmax
Itrip
Resistance
Max. Time To Trip
at 23 °C Ohms
at 23 °C
Imax
Tripped
Power
Dissipation
Agency Recognition
Volts
Amps
Rmin
R1max**
Amps
Seconds
Watts at
23 °C
Typ.
MF-USHT010KX
30
20
0.10
0.50
1.00
7.50
2.5
1.5
1.0
✓
✓
MF-USHT016KX
30
20
0.16
0.80
0.70
6.00
8.0
0.1
1.0
✓
✓
MF-USHT020KX
30
20
0.20
1.00
0.60
5.00
8.0
0.1
1.0
✓
✓
at 23 °C
Amps
cUL
TÜV
E174545
R50384138
MF-USHT035KX
30
20
0.35
1.75
0.40
2.20
8.0
0.1
1.0
✓
✓
MF-USHT050KX
30
20
0.50
2.50
0.30
1.60
8.0
0.1
1.0
✓
✓
MF-USHT075KX
16
20
0.75
3.75
0.10
1.00
8.0
5.0
1.0
✓
✓
MF-USHT110KX
9
20
1.10
5.50
0.06
0.50
8.0
5.0
1.0
✓
✓
MF-USHT125KX
9
40
1.25
3.75
0.03
0.30
8.0
5.0
1.5
✓
✓
MF-USHT150KX
9
40
1.50
4.50
0.025
0.25
8.0
5.0
1.5
✓
✓
**R1Max. measured 24 hours post reflow.
Environmental Characteristics
Item
Additional Information
Condition
Criteria
Operating Temperature
-20 °C to +125 °C
Recommended Storage
+40 °C max. / 70 % R.H. max.
Passive Aging
+125 °C, 1000 hours
R < R1max
Humidity Aging
+85 °C, 85 % R.H. 1000 hours
R < R1max
Thermal Shock
-40 °C to +85 °C, 20 times
R < R1max
Solvent Resistance
MIL-STD-202, Method 215
No change
(marking still legible)
Vibration
MIL-STD-883C, Method 2007.1
Condition A
No change
(Rmin < R < R1max)
Moisture Sensitivity Level
(MSL)
See Note
ESD Classification
Class 6 (per AEC-Q200-2, HBM)
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Click these links for more information:
PRODUCT TECHNICAL INVENTORY SAMPLES
SELECTOR LIBRARY
CONTACT
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl)
content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last
page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Applications
■ Protection of automotive circuitry including engine control modules
■ Overcurrent surge protection of electronic equipment required to operate at high operating temperature ranges
■ Resettable fault protection for general electronic equipment
MF-USHT Series - PTC Resettable Fuses
Test Procedures and Requirements
Item
Visual/Mechanical
Resistance
Time to Trip
Hold Current
Trip Cycle Life
Trip Endurance
Solderability
Test Condition
Verify dimensions and materials
In still air @ 23 °C
At specified current, Vmax, 23 °C, still air
30 min. at Ihold, still air
Vmax, Imax, 100 cycles
Vmax, 48 hours
245 °C ±5 °C, 5 seconds
Accept/Reject Criteria
Per MF physical description
Rmin ≤ R ≤ Rmax
T ≤ max. time to trip (seconds)
No trip
No arcing or burning
No arcing or burning
95 % min. coverage
Thermal Derating Table - Ihold (Amps)
Model
-40 °C
0.15
0.23
0.29
0.51
0.73
1.09
1.60
1.81
2.18
MF-USHT010KX
MF-USHT016KX
MF-USHT020KX
MF-USHT035KX
MF-USHT050KX
MF-USHT075KX
MF-USHT110KX
MF-USHT125KX
MF-USHT150KX
-20 °C
0.13
0.21
0.26
0.46
0.66
0.98
1.44
1.64
1.97
Ambient Operating Temperature
+23 °C
+40 °C
+50 °C
+60 °C
0.10
0.09
0.08
0.07
0.16
0.14
0.13
0.12
0.20
0.18
0.16
0.15
0.35
0.31
0.28
0.26
0.50
0.44
0.41
0.37
0.75
0.66
0.61
0.56
1.10
0.97
0.89
0.81
1.25
1.10
1.01
0.93
1.50
1.32
1.22
1.11
0 °C
0.12
0.19
0.23
0.41
0.58
0.87
1.28
1.45
1.74
+70 °C
0.07
0.11
0.13
0.23
0.34
0.50
0.74
0.84
1.01
+85 °C
0.06
0.09
0.11
0.20
0.28
0.42
0.62
0.70
0.84
+125 °C
0.03
0.04
0.05
0.09
0.14
0.20
0.30
0.34
0.41
Product Dimensions
Side View
Top View
A
C
Bottom View
D
Recommended Pad Layout
Terminal Material:
ENIG-plated terminals
E
K
C
2.50
(0.098)
B
1.00
(0.039)
Min.
Max.
Min.
Max.
Min.
Max.
D
Min.
E
Min.
MF-USHT010KX
MF-USHT016KX
MF-USHT020KX
MF-USHT035KX
MF-USHT050KX
3.00
(0.118)
3.43
(0.135)
2.35
(0.093)
2.80
(0.110)
0.40
(0.016)
0.85
(0.033)
0.30
(0.012)
0.05
(0.002)
MF-USHT075KX
3.00
(0.118)
3.43
(0.135)
2.35
(0.093)
2.80
(0.110)
0.60
(0.024)
1.20
(0.047)
0.30
(0.012)
0.05
(0.002)
MF-USHT110KX
MF-USHT125KX
MF-USHT150KX
3.00
(0.118)
3.43
(0.135)
2.35
(0.093)
2.80
(0.110)
0.80
(0.031)
1.60
(0.063)
0.30
(0.012)
0.05
(0.002)
Model
A
B
C
2.00
(0.079)
DIMENSIONS:
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-USHT Series - PTC Resettable Fuses
Packaging Quantity
Typical Part Marking
How to Order
MF-USHT010KX ~
MF-USHT075KX............. 3000 pcs. per reel
MF-USHT110KX ~
MF-USHT150KX............. 2000 pcs. per reel
MF - USHT 050 K X - 2
Represents total content. Layout may vary.
®
Multifuse Product
Designator
Series
USHT = 1210 High Temperature
Surface Mount
Component
K
C
Hold Current, Ihold
010 - 150 (0.10 - 1.50 Amps)
PART IDENTIFICATION:
MF-USHT010KX = B
MF-USHT016KX = D
MF-USHT020KX = E
MF-USHT035KX = F
MF-USHT050KX = K
MF-USHT075KX = L
MF-USHT110KX = N
MF-USHT125KX = P
MF-USHT150KX = S
BIWEEKLY DATE CODE:
WEEK 1 AND 2 = A
WEEK 51 AND 52 = Z
Material Specific Code
Multifuse® freeXpansion™ Design
Packaging
-2 = Tape and Reel
Packaged per EIA-481
Solder Reflow Recommendations
Notes:
tp
TP
CRITICAL ZONE
T L TO TP
RAMP-UP
TL
•
MF-USHT models are intended for reflow soldering (including, but not
limited to heating plate, hot air, IR, nitrogen, and vapor phase).
•
Wave soldering is permissible only if the device is on the top of the
PCB, opposite the heat source.
•
Hand soldering is not recommended for these devices.
•
All temperatures refer to the topside of the device, measured on the
device body surface.
•
If reflow temperatures exceed the recommended profile, devices may
not meet the published specifications.
Temperature
tL
Ts max
RAMP-DOWN
Ts min
ts
PREHEAT
25
t 25 °C TO PEAK
•
Compatible with Pb and Pb-free solder reflow profiles.
•
Excess solder may cause a short circuit.
•
Please refer to the Multifuse® Polymer PTC Resettable Fuse Soldering
Recommendations document for more details.
Time
Profile Feature
Pb-Free Assembly
Average Ramp-Up Rate (Tsmax to Tp)
3 °C / second max.
PREHEAT:
Temperature Min. (Tsmin)
Temperature Max. (Tsmax)
Time (Tsmin to Tsmax) (ts)
150 °C
200 °C
60~180 seconds
TIME MAINTAINED ABOVE:
Temperature (TL)
Time (tL)
217 °C
60~150 seconds
Peak Temperature (Tp)
260 °C
Time within 5 °C of Actual Peak Temperature (tp)
20~40 seconds
Ramp-Down Rate
6 °C / second max.
Time 25 °C to Peak Temperature
8 minutes max.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-USHT Series - PTC Resettable Fuses
Typical Time to Trip at 23 ˚C
10
A - MF-USHT010KX
Time to Trip (Seconds)
B - MF-USHT016KX
H
A
1
C - MF-USHT020KX
I
D - MF-USHT035KX
E - MF-USHT050KX
B
F
C
F - MF-USHT075KX
G
G - MF-USHT110KX
H - MF-USHT125KX
D
0.1
E
I - MF-USHT150KX
The Time to Trip curves represent typical performance of a device in
a simulated application environment. Actual performance in specific
customer applications may differ from these values due to the
influence of other variables.
0.01
0.001
0.1
1
10
100
Fault Current (Amps)
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-USHT Series Tape and Reel Specifications
MF-USHT Series
per EIA-481
8.0 ± 0.30
(.315 ± .012)
4.0 ± 0.10
(.157 ± .004)
40 ± 0.20
(1.575 ± .008)
4.0 ± 0.10
(.157 ± .004)
2.0 ± 0.05
(.079 ± .002)
3.00 ± 0.10
(.118 ± .004)
3.65 ± 0.10
(.144 ± .004)
3.50 ± 0.10
(.138 ± .004)
4.35
(.171)
1.5 +0.10/-0
(.059 +.004/-0)
3.5 ± 0.05
(.138 ± .002)
1.75 ± 0.10
(.069 ± .004)
6.25
(.246)
0.6
(.024)
0.1
(.004)
0.85 ± 0.10
(.033 ± .004)
1.22 ± 0.10
(.048 ± .004)
1.68 ± 0.10
(.066 ± .004)
390
(15.35)
160
(6.30)
Tape Dimensions
W
P0
10 P0
P1
P2
A0
B0 (MF-USHT010KX~MF-USHT050KX)
B0 (MF-USHT075KX~MF-USHT150KX)
B1 max.
D0
F
E1
E2 typ.
T max.
T1 max.
K0 (MF-USHT010KX~MF-USHT050KX)
K0 (MF-USHT075KX)
K0 (MF-USHT110KX~MF-USHT150KX)
Leader min.
Trailer min.
Reel Dimensions
185
(7.28)
50
(1.97)
8.4 +1.5/-0
(.331 +.059/-0)
14.4
(.567)
A max.
N min.
W1
W2 max.
T
D0
P2
P0
E1
W2(MEASURED
AT HUB)
COVER
TAPE
F
E2 W
B1
A
N(HUB DIA.)
B0
T1
K0
P1
A0
DIMENSIONS:
MM
(INCHES)
W1(MEASURED
AT HUB)
MF-USHT SERIES, REV. I 05/21
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Bourns
PPTC Resettable
Fuses
3312
- ®2 Multifuse
mm SMD® Trimming
Potentiometer
Application Notice
• Users are responsible for independent and adequate evaluation of Bourns® Multifuse® Polymer PTC devices in the user’s
application, including the PPTC device characteristics stated in the applicable data sheet.
•
Polymer PTC devices must not be allowed to operate beyond their stated maximum ratings. Operation in excess of such
maximum ratings could result in damage to the PTC device and possibly lead to electrical arcing and/or fire. Circuits with
inductance may generate a voltage above the rated voltage of the polymer PTC device and should be thoroughly evaluated
within the user’s application during the PTC selection and qualification process.
• Polymer PTC devices are intended to protect against adverse effects of temporary overcurrent or overtemperature
conditions up to rated limits and are not intended to serve as protective devices where overcurrent or overvoltage conditions
are expected to be repetitive or prolonged.
•
In normal operation, polymer PTC devices experience thermal expansion under fault conditions. Thus, a polymer PTC
device must be protected against mechanical stress, and must be given adequate clearance within the user’s application to
accommodate such thermal expansion. Rigid potting materials or fixed housings or coverings that do not provide adequate
clearance should be thoroughly examined and tested by the user, as they may result in the malfunction of polymer PTC
devices if the thermal expansion is inhibited.
• Exposure to lubricants, silicon-based oils, solvents, gels, electrolytes, acids, and other related or similar materials may
adversely affect the performance of polymer PTC devices.
•
Aggressive solvents may adversely affect the performance of polymer PTC devices. Conformal coating, encapsulating,
potting, molding, and sealing materials may contain aggressive solvents including but not limited to xylene and toluene,
which are known to cause adverse effects on the performance of polymer PTCs. Such aggressive solvents must be
thoroughly cured or baked to ensure their complete removal from polymer PTCs to minimize the possible adverse effect
on the device.
• Recommended storage conditions should be followed at all times. Such conditions can be found on the applicable data
sheet and on the Multifuse® Polymer PTC Moisture/Reflow Sensitivity Classification (MSL) note:
https://www.bourns.com/docs/RoHS-MSL/msl_mf.pdf
MFAN 12/18
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[UV[PJL