P4SMA8.2A

CO LO & MP LI GE AN N T FR EE *R oH S ** HA Features Applications ■ RoHS compliant* and halogen free** ■ IEC 61000-4-2 ESD (Min. Level 4) ■ Surface Mount SMA package ■ IEC 61000-4-4 EFT ■ Breakdown Voltage: 6.8 to 550 volts ■ IEC 61000-4-5 Surge ■ Peak Pulse Power: 400 watts ■ Typical temperature coefficient: ΔVBR = 0.1 % x VBR @ 25 °C x ΔT P4SMA Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 550 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 400 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 40 Amps VF 3.5 5.0 Volts TJ -55 to +150 °C TSTG -55 to +150 °C Instantaneous Forward Voltage @ 25 A (For Unidirectional Units Only) P4SMA6.8A ~ P4SMA200A P4SMA220A ~ P4SMA550A Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Mounted on 5.0 mm x 5.0 mm copper pad to each terminal. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order P4SMA 6.8 CA - H Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Series P4SMA = SMA/DO-214AC Breakdown Voltage 6.8 to 550 = 6.8 to 550 VBD (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (blank) = 13-inch reel -H = 7-inch reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part No. Marking Bidirectional Device Part No. Working Maximum Breakdown Voltage Peak Reverse VBR (Volts) Reverse Leakage Voltage @ VRWM @ IT Marking Min. Max. (mA) P4SMA6.8A 6V8A P4SMA6.8CA 6V8C 6.45 7.14 P4SMA7.5A 7V5A P4SMA7.5CA 7V5C 7.13 7.88 P4SMA8.2A 8V2A P4SMA8.2CA 8V2C 7.79 8.61 P4SMA9.1A 9V1A P4SMA9.1CA 9V1C 8.65 9.55 P4SMA10A 10A P4SMA10CA 10C 9.5 10.5 P4SMA11A 11A P4SMA11CA 11C 10.5 11.6 P4SMA12A 12A P4SMA12CA 12C 11.4 12.6 P4SMA13A 13A P4SMA13CA 13C 12.4 13.7 P4SMA15A 15A P4SMA15CA 15C 14.3 15.8 P4SMA16A 16A P4SMA16CA 16C 15.2 16.8 P4SMA18A 18A P4SMA18CA 18C 17.1 18.9 P4SMA20A 20A P4SMA20CA 20C 19 21 P4SMA22A 22A P4SMA22CA 22C 20.9 23.1 P4SMA24A 24A P4SMA24CA 24C 22.8 25.2 P4SMA27A 27A P4SMA27CA 27C 25.7 28.4 P4SMA30A 30A P4SMA30CA 30C 28.5 31.5 P4SMA33A 33A P4SMA33CA 33C 31.4 34.7 P4SMA36A 36A P4SMA36CA 36C 34.2 37.8 P4SMA39A 39A P4SMA39CA 39C 37.1 41 P4SMA43A 43A P4SMA43CA 43C 40.9 45.2 P4SMA47A 47A P4SMA47CA 47C 44.7 49.4 P4SMA51A 51A P4SMA51CA 51C 48.5 53.6 P4SMA56A 56A P4SMA56CA 56C 53.2 58.8 P4SMA62A 62A P4SMA62CA 62C 58.9 65.1 P4SMA68A 68A P4SMA68CA 68C 64.6 71.4 P4SMA75A 75A P4SMA75CA 75C 71.3 78.8 P4SMA82A 82A P4SMA82CA 82C 77.9 86.1 P4SMA91A 91A P4SMA91CA 91C 86.5 95.5 P4SMA100A 100A P4SMA100CA 100C 95 105 P4SMA110A 110A P4SMA110CA 110C 105 116 P4SMA120A 120A P4SMA120CA 120C 114 126 P4SMA130A 130A P4SMA130CA 130C 124 137 P4SMA150A 150A P4SMA150CA 150C 143 158 P4SMA160A 160A P4SMA160CA 160C 152 168 P4SMA170A 170A P4SMA170CA 170C 162 179 P4SMA180A 180A P4SMA180CA 180C 171 189 P4SMA200A 200A P4SMA200CA 200C 190 210 P4SMA220A 220A P4SMA220CA 220C 209 231 P4SMA250A 250A P4SMA250CA 250C 237 263 P4SMA300A 300A P4SMA300CA 300C 285 315 P4SMA350A 350A P4SMA350CA 350C 332 368 P4SMA400A 400A P4SMA400CA 400C 380 420 P4SMA440A 440A P4SMA440CA 440C 418 462 P4SMA480A 480A P4SMA480CA 480C 456 504 P4SMA510A 510A P4SMA510CA 510C 485 535 P4SMA530A 530A P4SMA530CA 530C 503.5 556.5 P4SMA540A 540A P4SMA540CA 540C 513 567 P4SMA550A 550A P4SMA550CA 550C 522.5 577.5 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VRWM (V) IR (μA) Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current (10/1000 μs) (10/1000 μs) Vc (V) Ipp (A) Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current (8/20 μs) (8/20 μs) Vc (V) Ipp (A) 5.8 1000 10.5 39 14 195 6.4 500 11.3 36.3 14.7 181.5 7.02 200 12.1 33.9 15.7 169.5 7.78 50 13.4 30.6 17.4 153.0 8.55 10 14.5 28.3 18.9 141.5 9.4 5 15.6 26.3 20.3 131.5 10.2 5 16.7 24.6 21.7 123.0 11.1 1 18.2 22.5 23.7 112.5 12.8 1 21.2 19.3 27.6 96.5 13.6 1 22.5 18.2 29.3 91.0 15.3 1 25.5 16.1 33.2 80.5 17.1 1 27.7 14.8 36.0 74.0 18.8 1 30.6 13.4 39.8 67.0 20.5 1 33.2 12.3 43.2 61.5 23.1 1 37.5 10.9 48.8 54.5 25.6 1 41.4 9.9 53.8 49.5 28.2 1 45.7 9 59 45 30.8 1 49.9 8.2 64.9 41.0 33.3 1 53.9 7.6 70.1 38.0 36.8 1 59.3 6.9 77.1 34.5 40.2 1 64.8 6.3 84.2 31.5 43.6 1 70.1 5.8 91.1 29.0 47.8 1 77 5.3 100.1 26.5 53 1 85 4.8 110.5 24.0 58.1 1 92 4.5 119.6 22.5 64.1 1 103 4 134 20 70.1 1 113 3.6 146.9 18.0 77.8 1 125 3.3 162.5 16.5 85.5 1 137 3 178 15 94 1 152 2.7 197.6 13.5 102 1 165 2.5 214.5 12.5 111 1 179 2.3 232.7 11.5 128 1 207 2 269 10 136 1 219 1.9 284.7 9.5 145 1 234 1.8 304.2 9.0 154 1 246 1.7 319.8 8.5 171 1 274 1.5 356.2 7.5 185 1 328 1.3 426.4 6.5 214 1 344 1.2 447.2 6.0 256 1 414 1 538 5 300 1 482 0.9 626.6 4.3 342 1 548 0.8 712.4 3.8 376 1 602 0.7 782.6 3.4 408 1 658 0.6 855.4 3.1 434 1 698 0.6 907.4 2.9 477 1 725 0.6 942.5 2.8 486 1 740 0.5 962.0 2.7 495 1 760 0.5 988.0 2.6 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 60 Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 50 40 30 20 Pulse Width 8.3 ms Single Half Sine-Wave 10 0 0 0 25 75 50 100 125 150 175 1 200 2 5 Pulse Waveform 50 100 10000 tr = 10 T J = 25 ° C µsec. Pulse Width (td) is defined as the point where the peak current decays to 50 % of I PPM Peak Value IPPM 100 Half Value- I PPM 2 50 Bidirectional V = 0 V CJ - Junction Capacitance (pF) IPPM - Peak Pulse Current, % IRSM 20 Typical Junction Capacitance 150 0 0 10 Number of Cycles at 60 Hz Ambient Temperature (°C) 10/1000 µsec. Waveform as defined by R.E.A. 1000 Unidirectional V = 0 V Unidirectional @VR 100 10 T J = 25 °C f = 1.0 MHz Vsig = 50 mVp-p td 1.0 2.0 3.0 4.0 Bidirectional @VR 1 t - Time (ms) 1 10 100 1000 V BR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 1.0 1.0 TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 0.1 0.1 µs 1.0 µs 10 µs 100 µs Td, Pulse Width (Seconds) 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) PPPM - Peak Pulse Power (kW) 10 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension a (Max.) F H D E b (Min.) c (Min.) Dimension A B C D E F G H SMA (DO-214AC) 3.99 - 4.50 (0.157 - 0.177) 2.54 - 2.79 (0.100 - 0.110) 1.25 - 1.65 (0.049 - 0.065) 0.15 - 0.31 (0.006 - 0.112) 4.93 - 5.28 (0.194 - 0.208) 0.203 MAX. (0.008) 1.98 - 2.29 (0.078 - 0.090) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMA (DO-214AC) 2.70 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Unidirectional Product Orientation Trailer ....... ....... End C Leader Device ....... ....... ....... ....... ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA 481 standard specifications shown here. Direction of Feed Item MM (INCHES) Symbol SMA (DO-214AC) 7 Inch Reel Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- 13 Inch Reel 2.90 ± 0.20 (0.114 ± 0.008) 5.50 ± 0.20 (0.217 ± 0.008) 2.26 ± 0.20 (0.089 ± 0.008) 1.50 ± 0.10 (0.061 ± 0.004) 178 (7.008) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724) 1000 5,000 REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL