OPA2131UJ/2K5

O PA OPA1 OPA 131 OPA2 31 2131 O PA OPA131 OPA2131 OPA4131 4131 OP A41 31 131 OPA4 131 SBOS040A – NOVEMBER 1994 – REVISED DECEMBER 2002 General-Purpose FET-INPUT OPERATIONAL AMPLIFIERS FEATURES ● FET INPUT: IB = 50pA max ● LOW OFFSET VOLTAGE: 750µV max OPA131 ● WIDE SUPPLY RANGE: ±4.5V to ±18V ● SLEW RATE: 10V/µs Offset Trim 1 8 NC –In 2 7 V+ +In 3 6 Output V– 4 5 Offset Trim 8 V+ 7 Out B 6 –In B 5 +In B ● WIDE BANDWIDTH: 4MHz ● EXCELLENT CAPACITIVE LOAD DRIVE ● SINGLE, DUAL, QUAD VERSIONS DIP-8, SO-8 DESCRIPTION The OPA131 series of FET-input op amps provides high performance at low cost. Single, dual, and quad versions in industry-standard pinouts allow cost-effective design options. OPA2131 Out A The OPA131 series offers excellent general-purpose performance, including low offset voltage, drift, and good dynamic characteristics. 1 –In A 2 +In A 3 V– 4 A B Single, dual, and quad versions are available in DIP and SO packages. Performance grades include commercial and industrial temperature ranges. DIP-8, SO-8 OPA4131 OPA4131 Out A 1 –In A 2 A 14 Out D Out A 1 13 –In D –In A 2 A D +In A 3 12 +In D V+ 4 11 V– +In B 5 10 +In C B 16 Out D 15 –In D D +In A 3 14 +In D V+ 4 13 V– +In B 5 12 +In C B C C –In B 6 9 –In C –In B 6 11 –In C Out B 7 8 Out C Out B 7 10 Out C NC 8 9 NC DIP-14, SO-14 NC = No Connection SOL-16 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright © 1994, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. www.ti.com ELECTROSTATIC DISCHARGE SENSITIVITY ABSOLUTE MAXIMUM RATINGS(1) Supply Voltage, V+ to V– .................................................................... 36V Input Voltage .................................................. (V–) – 0.7V to (V+) + 0.7V Output Short-Circuit(2) .............................................................. Continuous Operating Temperature .................................................. –55°C to +125°C Storage Temperature ..................................................... –55°C to +125°C Junction Temperature ...................................................................... 150°C Lead Temperature (soldering, 10s) ................................................. 300°C NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. (2) Short-circuit to ground, one amplifier per package. This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE/ORDERING INFORMATION PACKAGE-LEAD PACKAGE DESIGNATOR(1) SPECIFIED TEMPERATURE RANGE PACKAGE MARKING ORDERING NUMBER TRANSPORT MEDIA, QUANTITY Single OPA131 " OPA131 " OPA131 " SO-8 " SO-8 " SO-8 " D " D " D " –40°C to +85°C " –40°C to +85°C " –40°C to +85°C " OPA131UJ " OPA131UA " OPA131U " OPA131UJ OPA131UJ/2K5 OPA131UA OPA131UA/2K5 OPA131U OPA131U/2K5 Rails, 100 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500 Dual OPA2131 " OPA2131 " SO-8 " SO-8 " D " D " –40°C to +85°C " –40°C to +85°C " OPA2131UJ " OPA2131UA " OPA2131UJ OPA2131UJ/2K5 OPA2131UA OPA2131UA/2K5 Rails, 100 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500 Quad OPA4131 " OPA4131 " OPA4131 " DIP-14 " SOL-16 " SOL-14 " N " DW " D " –40°C to +85°C " –40°C to +85°C " –40°C to +85°C " OPA4131PJ OPA4131PA OPA4131UA " OPA4131NJ OPA4131NA OPA4131PJ OPA4131PA OPA4131UA OPA4131UA/1K OPA4131NJ OPA4131NA Rails, 25 Rails, 25 Rails, 48 Tape and Reel, 1000 Rails, 58 Rails, 58 PRODUCT NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com. 2 OPA131, 2131, 4131 www.ti.com SBOS040A ELECTRICAL CHARACTERISTICS At TA = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. OPA131UA OPA2131UA OPA4131PA, UA, NA PARAMETER OFFSET VOLTAGE Input Offset Voltage OPA131U model only vs Temperature(1) vs Power Supply OPA131U model only INPUT BIAS CURRENT(2) Input Bias Current vs Temperature Input Offset Current CONDITION MIN TYP MAX UNITS ✻ ±1.5 ✻ ✻ ✻ ✻ mV mV µV/°C µV/V µV/V +5 ±50 See Typical Characteristic ±1 ±50 ✻ ✻ ✻ ✻ pA ✻ pA 21 16 15 15 3 ✻ ✻ ✻ ✻ ✻ Operating Temperature Range VS = ±4.5V to ±18V VCM = 0V VCM = 0V NOISE Input Voltage Noise Noise Density, f = 10Hz f = 100Hz f = 1kHz f = 10kHz Current Noise Density, f = 1kHz INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection OPA131U model only INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN Open-Loop Voltage Gain OPA131U model only FREQUENCY RESPONSE Gain-Bandwidth Product Slew Rate Settling Time 0.1% 0.01% Total Harmonic Distortion + Noise VCM = –12V to +14V VO = –12V to +12V MAX ±0.2 ±0.2 ±2 50 50 ±1 0.75 ±10 200 100 (V+) – 1 80 86 94 100 ✻ ✻ ✻ 110 110 4 10 1.5 2 0.0008 G = –1, 10V Step, CL = 100pF G = –1, 10V Step, CL = 100pF 1kHz, G = 1, VO = 3.5Vrms ✻ ✻ (V+) – 3 (V+) – 2.5 (V–) + 3 (V–) + 2.5 ±25 ±4.5 IO = 0 TEMPERATURE RANGE Operating Range Storage Thermal Resistance, θJA DIP-8 SO-8 DIP-14 SO-14, SOL-16 MIN 1010 || 1 1012 || 3 VCM = 0V OUTPUT Voltage Output, Positive Negative Short-Circuit Current POWER SUPPLY Specified Operating Voltage Operating Voltage Range Quiescent Current (per amplifier) (V–) + 3 70 80 TYP OPA131UJ OPA2131UJ OPA4131PJ, NJ ±15 ±1.5 –55 –55 100 150 80 110 nV/√Hz nV/√Hz nV/√Hz nV/√Hz fA/√Hz ✻ ✻ V dB dB ✻ ✻ Ω || pF Ω || pF ✻ dB dB ✻ ✻ ✻ ✻ ✻ MHz V/µs µs µs % ✻ ✻ ✻ V V mA ✻ ±18 ±1.75 ✻ +125 +125 –55 ✻ ✻ ✻ ✻ ✻ ✻ ✻ ±2 V V mA +125 ✻ °C °C °C/W °C/W °C/W °C/W ✻ Specifications same as OPA131UA. NOTES: (1) Ensured by wafer test. (2) High-speed test at TJ = 25°C. OPA131, 2131, 4131 SBOS040A www.ti.com 3 TYPICAL CHARACTERISTICS At TA = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. POWER SUPPLY AND COMMON-MODE REJECTION vs FREQUENCY OPEN-LOOP GAIN/PHASE vs FREQUENCY 100 80 ∅ –90 60 40 –135 20 Phase Shift (°) Voltage Gain (dB) –45 G –180 0 Power Supply Rejection (dB) 120 –20 120 100 80 80 –PSR 60 CMR 40 40 20 20 10 100 1k 10k 100k 1M 0 10 10M 100 1k Frequency (Hz) 10 10 Channel Separation (dB) Voltage Noise RL = ∞ 140 120 Dual and quad devices. G = 1, all channels. Quad measured channel A to D or B to C—other combinations yield improved rejection. 100 Current Noise 1 1 100 1k 1M 160 Current Noise (fA/√Hz) Voltage Noise (nV/√Hz) 100 100 10 100k CHANNEL SEPARATION vs FREQUENCY 1k 1k 1 10k Frequency (Hz) INPUT VOLTAGE AND CURRENT NOISE SPECTRAL DENSITY vs FREQUENCY 10k 100k RL = 2kΩ 80 10 1M 100 1k 10k 100k Frequency (Hz) Frequency (Hz) INPUT BIAS AND INPUT OFFSET CURRENT vs TEMPERATURE INPUT BIAS CURRENT vs INPUT COMMON-MODE VOLTAGE 1k 10k Input bias current is a function of the voltage between the V– supply and the inputs. 1k Input Bias Current (pA) Input Bias and Input Offset Current (pA) 60 0 1 VCM = 0V 100 IB IOS 10 1 100 VS = ±15V 10 0.1 VS = ±5V 0.01 –75 –50 –25 0 25 50 75 100 125 1 –15 –10 –5 0 5 10 15 Common-Mode Voltage (V) Ambient Temperature (°C) 4 100 +PSR OPA131, 2131, 4131 www.ti.com SBOS040A Common-Mode Rejection (dB) 0 120 TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT vs TEMPERATURE 1.8 120 40 IQ VS = ±15V Quiescent Current (mA) Voltage Gain (dB) ISC– 115 110 105 30 ISC+ 1.4 20 IQ VS = ±5V 1.2 10 1 100 –75 –50 –25 0 25 50 75 100 0 –75 125 –50 –25 0 25 50 75 Ambient Temperature (°C) Temperature (°C) OFFSET VOLTAGE PRODUCTION DISTRIBUTION OFFSET VOLTAGE DRIFT PRODUCTION DISTRIBUTION 100 125 35 20 Typical production distribution of packaged units. Single, Typical production distribution of packaged units. Single, 30 dual and quad units included. 15 dual and quad units included. 25 Units (%) Units (%) 1.6 10 20 15 10 5 5 0 1400 1200 800 1000 600 400 0 200 –200 –400 –600 –800 –1000 –1200 –1400 0 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 Offset Voltage Drift (µV/°C) Offset Voltage (µV) MAXIMUM OUTPUT VOLTAGE vs FREQUENCY TOTAL HARMONIC DISTORTION + NOISE vs FREQUENCY 30 1 Output Voltage (Vp-p) VO = 3.5Vrms 0.1 THD + Noise (%) VS = ±15V BandwidthLimited G = 100V/V 0.01 G = 10V/V 0.001 Maximum output voltage without slew-rate induced distortion. 20 10 VS = ±5V G = 1V/V 0 0.0001 10 100 1k 10k 100k OPA131, 2131, 4131 SBOS040A 10k 100k 1M 10M Frequency (Hz) Frequency (Hz) www.ti.com 5 Short-Circuit Current (mA) OPEN-LOOP GAIN vs TEMPERATURE TYPICAL CHARACTERISTICS (Cont.) At TCASE = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. LARGE-SIGNAL STEP RESPONSE G = 1, CL = 300pF 5V/div 50mV/div SMALL-SIGNAL STEP RESPONSE G =1, CL = 300pF 1µs/div 200ns/div SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE SETTLING TIME vs CLOSED-LOOP GAIN 100 50 40 Overshoot (%) Settling Time (µs) VO = 10V Step RL = 2kΩ CL = 100pF 10 0.01% 0.1% G = +2 G = –1 30 G = ±10 20 G=1 10 1 –1 RL = 2kΩ Higher RL value generally reduces overshoot. –10 –100 0 100pF –1000 1nF Closed-Loop Gain (V/V) 10nF Load Capacitance OUTPUT VOLTAGE SWING vs OUTPUT CURRENT 15 VIN = 15V Output Voltage Swing (V) 14 13 25°C –55°C 12 11 125°C 10 –10 25°C 125°C –11 –12 –55°C –13 –14 VIN = –15V –15 0 5 10 15 20 25 30 Output Current (mA) 6 OPA131, 2131, 4131 www.ti.com SBOS040A APPLICATIONS INFORMATION V+ The OPA131 series op amps are unity-gain stable and suitable for a wide range of general-purpose applications. Power-supply pins should be bypassed with 10nF ceramic capacitors or larger. OPA131 (Single op amp only) 7 2 6 3 OPA131 5 The OPA131 series op amps are free from unexpected output phase-reversal common with FET op amps. Many FET-input op amps exhibit phase-reversal of the output when the input common-mode voltage range is exceeded. This can occur in voltage-follower circuits, causing serious problems in control-loop applications. All circuitry is completely independent in dual and quad versions, assuring normal behavior when one amplifier in a package is overdriven or shortcircuited. FIGURE 1. OPA131 Offset Voltage Trim Circuit. OFFSET VOLTAGE TRIM INPUT BIAS CURRENT The OPA131 (single op amp version) provides offset voltage trim connections on pins 1 and 5. Offset voltage can be adjusted by connecting a potentiometer as shown in Figure 1. This adjustment should be used only to null the offset of the op amp, not system offset or offset produced by the signal source. 1 4 Trim Range: ±20mV typ V– The input bias current is approximately 5pA at room temperature and increases with temperature as shown in the typical characteristic “Input Bias Current vs Temperature.” Input bias current also varies with common-mode voltage and power supply voltage. This variation is dependent on the voltage between the negative power supply and the common-mode input voltage. The effect is shown in the typical curve “Input Bias Current vs Common-Mode Voltage.” OPA131, 2131, 4131 SBOS040A 100kΩ www.ti.com 7 PACKAGE OPTION ADDENDUM www.ti.com 21-Sep-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) OPA131U ACTIVE SOIC D 8 75 RoHS & Green Call TI Level-3-260C-168 HR -55 to 125 OPA 131U OPA131UA ACTIVE SOIC D 8 75 RoHS & Green Call TI Level-3-260C-168 HR -55 to 125 OPA 131U A OPA131UA/2K5 ACTIVE SOIC D 8 2500 RoHS & Green Call TI Level-3-260C-168 HR -55 to 125 OPA 131U A OPA131UJ ACTIVE SOIC D 8 75 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -55 to 125 OPA 131UJ Samples OPA131UJ/2K5 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-3-260C-168 HR -55 to 125 OPA 131UJ Samples OPA2131UA ACTIVE SOIC D 8 75 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -55 to 125 OPA 2131UA Samples OPA2131UA/2K5 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA Samples OPA2131UA/2K5G4 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA Samples OPA2131UAE4 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -55 to 125 OPA 2131UA Samples OPA2131UAG4 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -55 to 125 OPA 2131UA Samples OPA2131UJ ACTIVE SOIC D 8 75 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR OPA 2131UJ Samples OPA2131UJ/2K5 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-3-260C-168 HR OPA 2131UJ Samples OPA4131NA ACTIVE SOIC D 14 50 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -40 to 85 OPA4131NA Samples OPA4131NAG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -40 to 85 OPA4131NA Samples OPA4131NJ ACTIVE SOIC D 14 50 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -40 to 85 OPA4131NJ Samples OPA4131PA ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 OPA4131PA Samples Addendum-Page 1 Samples Samples Samples PACKAGE OPTION ADDENDUM www.ti.com 21-Sep-2022 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) OPA4131PAG4 ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 OPA4131PA Samples OPA4131PJ ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 OPA4131PJ Samples OPA4131UA ACTIVE SOIC DW 16 40 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -40 to 85 OPA4131UA Samples OPA4131UA/1K ACTIVE SOIC DW 16 1000 RoHS & Green NIPDAU-DCC Level-3-260C-168 HR -40 to 85 OPA4131UA Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of