PCI7621/PCI7611
PCI7421/PCI7411
www.ti.com
SLLA248 – JULY 2006
Dual/Single Socket CardBus and UltraMedia Controller With Integrated 1394a-2000 OHCI
Two-Port PHY/Link-Layer Controller With Dedicated Flash Media Socket
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PC Card Standard 8.1 compliant
PCI Bus Power Management Interface
Specification 1.1 compliant
Advanced Configuration and Power Interface
(ACPI) Specification 2.0 compliant
PCI Local Bus Specification Revision 2.3
compliant
PC 98/99 and PC2001 compliant
Windows Logo Program 2.0 compliant
PCI Bus Interface Specification for
PCI-to-CardBus Bridges
Fully compliant with provisions of IEEE Std
1394-1995 for a high-performance serial bus
and IEEE Std 1394a-2000
Fully compliant with 1394 Open Host
Controller Interface Specification 1.1
1.5-V core logic and 3.3-V I/O cells with
internal voltage regulator to generate 1.5-V
core VCC
Universal PCI interfaces compatible with
3.3-V and 5-V PCI signaling environments
Supports PC Card or CardBus with hot
insertion and removal
Supports 132-MBps burst transfers to
maximize data throughput on both the PCI
bus and the CardBus
Supports serialized IRQ with PCI interrupts
Programmable multifunction terminals
Many interrupt modes supported
Serial ROM interface for loading subsystem
ID and subsystem vendor ID
ExCA-compatible registers are mapped in
memory or I/O space
Intel 82365SL-DF register compatible
Supports ring indicate, SUSPEND, and PCI
CLKRUN protocols
Provides VGA/palette memory and I/O, and
subtractive decoding options, LED activity
terminals
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fully interoperable with FireWire™ and
i.LINK™ implementations of IEEE Std 1394
Compliant with Intel Mobile Power Guideline
2000
Full IEEE Std 1394a-2000 support includes:
connection debounce, arbitrated short reset,
multispeed concatenation, arbitration
acceleration, fly-by concatenation, and port
disable/suspend/resume
Power-down features to conserve energy in
battery-powered applications include:
automatic device power down during
suspend, PCI power management for
link-layer, and inactive ports powered down,
ultralow-power sleep mode
Two IEEE Std 1394a-2000 fully compliant
cable ports at 100M bits/s, 200M bits/s, and
400M bits/s
Cable ports monitor line conditions for active
connection to remote node
Cable power presence monitoring
Separate cable bias (TPBIAS) for each port
Physical write posting of up to three
outstanding transactions
PCI burst transfers and deep FIFOs to
tolerate large host latency
External cycle timer control for customized
synchronization
Extended resume signaling for compatibility
with legacy DV components
PHY-Link logic performs system initialization
and arbitration functions
PHY-Link encode and decode functions
included for data-strobe bit level encoding
PHY-Link incoming data resynchronized to
local clock
Low-cost 24.576-MHz crystal provides
transmit and receive data at 100M bits/s,
200M bits/s, and 400M bits/s
Node power class information signaling for
system power management
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
FireWire is a trademark of Apple Computer, Inc..
i.LINK is a trademark of Sony Corporation of America.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated
PCI7621/PCI7611
PCI7421/PCI7411
www.ti.com
SLLA248 – JULY 2006
•
•
•
•
Register bits give software control of
contender bit, power class bits, link active
control bit, and IEEE Std 1394a-2000 features
Isochronous receive dual-buffer mode
Out-of-order pipelining for asynchronous
transmit requests
Register access fail interrupt when the PHY
SCLK is not active
•
•
•
•
PCI power-management D0, D1, D2, and D3
power states
Initial bandwidth available and initial
channels available registers
PME support per 1394 Open Host Controller
Interface Specification
Advanced submicron, low-power CMOS
technology
DESCRIPTION
The Texas Instruments PCI7621 controller is an integrated dual-socket UltraMedia PC Card controller, Smart
Card controller, IEEE 1394 open HCI host controller and PHY, and flash media controller. This high-performance
integrated solution provides the latest in PC Card, Smart Card, IEEE 1394, Secure Digital (SD), MultiMediaCard
(MMC), Memory Stick/PRO, SmartMedia, and XD technology.
The Texas Instruments PCI7421 controller is an integrated dual-socket UltraMedia PC Card controller, IEEE
1394 Open HCI host controller and PHY, and flash media controller. This high-performance integrated solution
provides the latest in PC Card, IEEE 1394, SD, MMC, Memory Stick/PRO, SmartMedia, and XD technology.
The Texas Instruments PCI7611 controller is an integrated single-socket UltraMedia PC Card controller, Smart
Card controller, IEEE 1394 open HCI host controller and PHY, and flash media controller. This high-performance
integrated solution provides the latest in PC Card, Smart Card, IEEE 1394, SD, MMC, Memory Stick/PRO,
SmartMedia, and XD technology.
The Texas Instruments PCI7411 controller is an integrated single-socket UltraMedia PC Card controller, IEEE
1394 open HCI host controller and PHY, and flash media controller. This high-performance integrated solution
provides the latest in PC Card, IEEE 1394, SD, MMC, Memory Stick/PRO, SmartMedia, and XD technology.
For the remainder of this document, the PCI7x21 controller refers to the PCI7621 and PCI7421 controllers, and
the PCI7x11 controller refers to the PCI7611 and PCI7411 controllers.
Various implementation-specific functions and general-purpose inputs and outputs are provided through eight
multifunction terminals. These terminals present a system with options in PC/PCI DMA, serial and parallel
interrupts, PC Card activity indicator LEDs, flash media LEDs, and other platform-specific signals. PCI complaint
general-purpose events may be programmed and controlled through the multifunction terminals, and an
ACPI-compliant programming interface is included for the general-purpose inputs and outputs.
The PCI7x21/PCI7x11 controller is compliant with the latest PCI Bus Power Management Specification, and
provides several low-power modes, which enable the host power system to further reduce power consumption.
The PCI7x21/PCI7x11 controller also has a three-pin serial interface compatible with the Texas Instruments
TPS2228 (default), TPS2226, TPS2224, and TPS2223A power switches. All four power switches provide power
to the CardBus socket(s) on the PCI7x21/PCI7x11 controller. The power to each dedicated socket is controlled
through separate power control pins. Each of these power control pins can be connected to an external 3.3-V
power switch.
NOTE:
This product is for high-volume PC applications only. For a complete datasheet or
more information contact support@ti.com.
2
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
26-Aug-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
(4/5)
PCI7411GHK
OBSOLETE
BGA
MICROSTAR
GHK
288
TBD
Call TI
Call TI
0 to 70
PCI7411ZHK
OBSOLETE
BGA
MICROSTAR
ZHK
288
TBD
Call TI
Call TI
0 to 70
PCI7421GHK
OBSOLETE
BGA
MICROSTAR
GHK
288
TBD
Call TI
Call TI
0 to 70
PCI7421ZHK
ACTIVE
BGA
MICROSTAR
ZHK
288
Green (RoHS
& no Sb/Br)
SNAGCU
Level-3-260C-168 HR
0 to 70
PCI7611GHK
OBSOLETE
BGA
MICROSTAR
GHK
288
TBD
Call TI
Call TI
0 to 70
PCI7611ZHK
OBSOLETE
BGA
MICROSTAR
ZHK
288
TBD
Call TI
Call TI
0 to 70
PCI7621GHK
OBSOLETE
BGA
MICROSTAR
GHK
288
TBD
Call TI
Call TI
0 to 70
90
Device Marking
(3)
PCI7421
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
26-Aug-2013
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated