CCM03-3504

1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 29 CCM03 MK II A new range of CCM03 connectors have been developed to interface with SIM/SAM cards as defined by GSM1111 and ENV1375-1. The connectors are available with either hinged covers or fixed covers and have been designed to minimize the amount of space needed for PCB mounting. Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correctly inserted. • The cover can be replaced without removing the connector from the PCB Construction Contacts Plating Copper alloy Contact area : Gold alloy inlay Terminals : Tin lead (2µ min) High temp. thermoplastic UL 94V-0 rated Stainless steel Moldings Spring Mechanical data Number of Contacts Mechanical life, hinged cover Mechanical life, fixed cover Durability of inlay, hinged cover Durability of inlay, fixed cover Card insertion force Card extraction force Contact force Slide locking force Vibration Shock • Inspection slots allow an electrical test to be made without opening the cover. • The overall height of the connector is only 2.5 mm. The amount of space needed to mount the connector is just 29.65 mm x 17.2 mm Electrical data Insulation resistance Contact resistance max Switching current Dielectric strength 6 or 8 10,000 cycles min 50,000 cycles 10,000 cycles min (see note 1) 5,000 cycles Hinged cover: 1 N max Fixed cover: 3 N max Hinged cover: 1 N max Fixed cover: 0.80 N min / 3 N max 0.25 N min / 0.50 N max 2 N min / 6 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0.35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Fixed Cover • Available with 6 or 8 contacts. • The overall height of the connector is 2.85 mm max. Only 25.5 mm x 17.2 mm of board space is required to mount the connector. General • With tape and reel packaging as standard, the connectors are designed to be automatically pick-and-placed. Environmental data Operating temperature Soldering temperature Damp heat Salt mist -40°C to +85°C Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature 250°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is intended to represent worst case. • The high temperature thermoplastic moldings are suited for infrared and convection soldering processes. • By using an inlay finish in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating. • Robustly formed printed circuit tails allow a co-planarity of ±0.05 mm to be maintained. Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 27 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 30 CCM03 MK II Ordering code Part Number CCM03-3001 CCM03-3002 CCM03-3003 CCM03-3004 CCM03-3005 CCM03-3006 CCM03-3007 CCM03-3008 CCM03-3009 CCM03-3013 CCM03-3504 CCM03-3505 CCM03-3512 CCM03-3514 R102 R102 R102 R102 R701** R701** R701** R701** R102 R102 R122 R122 R102* R102 N° of Contacts 6 6 8 8 6 6 8 8 6 6 8 6 6 6 Cover Hinged Hinged Hinged Hinged Hinged Hinged Hinged Hinged Hinged Hinged Fixed Fixed Hinged Hinged PCB Locating Pegs (mm) No Yes No Yes No Yes No Yes No No No No No No Stand off (mm) 0.00 0.00 0.00 0.00 1.90 1.90 1.90 1.90 0.00 0.00 0.00 0.00 0.00 0.00 Quantity per reel 1000 1000 1000 1000 700 700 700 700 1000 1000 1200 1200 1000 1000 Metal lock Flat Flat Flat Flat Bump Bump Bump Bump Bump Bump No No Bump Bump Switch lock No No No No No No No No No No No No No Yes Card Presence switch No No No No No No No No No Yes No No No No *Note: Terminal width = 1 mm - Length = 1.5 mm. (For double reflow). **Note: On request - Depending on quantities. Packaging CCM03 are packaged in accordance with EIA 481-3. Standard packaging is on tape and reel. A modification code is added to the part number that indicates reel packaging and the number of components per reel. There are 5 reels per box. Reel Diameter 360 mm Reel Width 24.4 mm X 344 mm Y 350 mm Z 152 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 28 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 31 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03 - 3001 (6 contacts) 3002 (6 contacts - PCB locating pegs) 3003 (8 contacts) 3004 (8 contacts - PCB locating pegs) 3009 (6 contacts - lock with bump) Open With pegs* Without pegs Notes: Coplanarity of soldering surfaces: ± 0.05 mm *Pegs: Height 0.7 mm and Ø 1 mm PCB Layout CCM03-3001 / 3002 / 3009 CCM03-3003 / 3004 1. Mounting pegs only available with CCM03-3002 / 3004 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 29 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 32 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03 - 3005 (6 contacts - with stand off 1.90 mm) Open Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3005 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 30 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 33 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03 - 3006 (6 contacts - with locating pegs 1.90 mm) Open Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3006 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 31 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 34 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03 - 3007 (8 contacts - with stand off 1.90 mm) Open Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3007 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 32 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 35 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03-3008 (8 contacts - with locating pegs 1.90 mm) Open Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3008 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 33 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 36 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03-3013 (6 contacts + Card Detect Switch) Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3013 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 34 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 37 CCM03 MK II Fixed Cover Dimensional Drawings Fixed cover CCM03-3505 (6 contacts not shown) / CCM03-3504 (8 contacts) Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3504 CCM03-3505 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 35 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 38 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03-3512 (6 contacts) Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3512 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 36 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 39 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03-3514 (6 contacts - with switch on metal lock) Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3514 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 37 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 40 CCM03 MK II with Auto Lock cover A new range of CCM03 connectors have been developed to interface with SIM/SAM cards as defined by GSM1111 and ENV1375-1. The connectors are available with a hinged metallic cover and have been designed to provide an easier open/lock function and side card entry. Features • Available with 6 cross contacts which are designed to give a consistently reliable normal force over the life of the connector. • The hinged metallic cover can automatically lock by pressure. • Side entry of the card ensures easier positioning of the card into the connector. • Blade switch version available for detection card when cover is closed. • The molding is polarized so that the cover can only be closed if the card is correctly inserted. • Inspection slots allow an electrical test to be made without opening the cover. General • With tape and reel packaging as standard, the connectors are designed to be automatically pick-and-placed. • The moldings are made from high temperature thermoplastics suited to infra-red and convection soldering processes. Construction Contacts Contacts finish PC tail plating Molding Cover Copper alloy Gold alloy inlay (Au/Ag/Pd) Tin lead (2µ min) Sn/Pb High temp. thermoplastic, UL94V-0 Stainless steel Mechanical data Number of Contacts Mechanical life Durability of inlay Contact force Vibration 6 10,000 cycles min 10,000 cycles min 0.25 N min / 0.50 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0.35 mm (0.014) Max electrical discontinuity 1µs Electrical data Insulation resistance Contact resistance Signal current rating Dielectric strength Card detection switch Switch contact resistance Dielectric strength switch Switch current rating Maximum switch power Environmental data Operating temperature Soldering temperature 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Normally open 100 mΩ max 250 Vrms min 1mA min / 10m A max 0.2 VA -40°C to +85°C Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature 250°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Damp heat Salt mist Ordering Code Part Number CCM03-3517 CCM03-3518 N° of Contacts 6 6 Cover Hinged Hinged Card Presence Switch No Yes Quantity per reel 1300 1300 • By using an inlay finish in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating. • Robustly formed printed circuit tails allow a co-planarity of ±0.05 mm to be maintained. Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 38 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 41 CCM03 MK II with Auto Lock cover Dimensional Drawings Hinged Cover CCM03-3517 (6 contacts) OPEN Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3517 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 39 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 42 CCM03 MK II with Auto Lock cover Dimensional Drawings Hinged Cover CCM03-3518 (6 contacts) OPEN Note: Coplanarity of soldering surfaces: ± 0.05 mm PCB Layout CCM03-3518 Unless otherwise stated, tolerances are ± 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 40 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 43 CCM03 MK III Introducing the new CCM03 Series SIM/SAM Card Connector from ITT Cannon Switch Products, featuring an integrated card detection switch. This connector provides a competitive advantage to smart card reader device manufacturers by minimizing the space usage on the PCB, and features a side entry to offer convenient card access without opening the device. The unique design of this compact-size connector makes it ideal for telecommunications, portable electronics, POS terminals and similar applications, and meets GSM 11-11 and EMV specifications. Features • Unique card-guiding design. • 6 spoon-shaped, gold-alloyed contacts resist wear and improve connectivity. • Sealed card detection switches reduce connectivity problems caused by dust or moisture. • Switch design detects and holds the card while providing firm contact. • Unique side entry design offers card access without opening the device. • Stainless steel cover and UL 94VO high-temperature thermoplastic insulator. Construction Insulator Contacts Contact finish PC Tail plating High temperature thermoplastic UL 94V.0 Copper Alloy Gold Alloy Inlay (Au / Ag / Pd) Tin lead (2 µm min) Sn / Pb Mechanical data Mechanical life Precious metal Contact force 10,000 cycles minimum 5000 cycles minimum (see note 1) 0.25N min / 0.5N max Electrical data Insulation resistance Contact resistance max Switching current Dielectric strength 1000 MΩ min 100 mΩ max 10 µA min / 1 A max 500 Vrms min Environmental data Operating temperature Soldering temperature -40°C to +85°C Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature IEC 512 test number 11f (96 hours) IEC 512 test number 11c (10 days) Salt mist Damp heat Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is intended to represent worst case. Ordering Code Part Number CCM03-3752 R102 CCM03-3753 R102 CCM03-3754 R102 CCM03-3757 R102 CCM03-3758 R102 N° of Contacts 6 6 6 6 6 Cover Without chamfer With chamfer With chamfer With chamfer With chamfer Switch Testing Hole Yes No Yes No Yes Ground Terminal No No No Yes Yes Quantity per reel 1000 1000 1000 1000 1000 Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 41 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 44 CCM03 MK III Dimensional Drawings CCM03 – 3753 / 3757 CCM03 – 3752 / 3754 / 3758 PCB Layout CCM03 – 3752 / 3753 / 3754 CCM03 – 3757 / 3758 Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 42