7M2-221

Document 112-1 “Slot Seven” 7 mm Tunable Inductors This product is not RoHS-compliant. Contact Coilcraft for current status or possible alternatives. These versatile Coilcraft variable inductors operate over a wide range of frequencies. Standard inductance values are available from less than 100 nH to over 250 µH. Custom values can also be provided upon request. Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability. A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug. Coilcraft Designer’s Kit M106 contains 39 coils (3 each). To order, please contact Coilcraft or purchase on-line at http://order.coilcraft.com. Recommended Board Layout 0.177 ±0.005 sq 4,50 ±0,13 0.0885 ref 2,248 Bottom View 0.300 max sq 7,62 1 2 3 0.039 (5) 0,99 Start 0.138 ±0.040 3,51 ±1,02 0.460 ±0.008 11,68 ±0,20 Finish 0.059 (2) 1,50 0.039 ±0.008 0,99 ±0,20 0.285 ref 7,24 Can tab centers 1.00 – 1.06 g 1.30 – 1.34 g Tuning slug 6 4 Tab thickness 0.006 ±0.0004 0,15 ±0,010 0.019 dia nom 0,48 Weight 7M2 series 7M3 series Schematic 1 3 Specifications subject to change without notice. Please check our website for latest information. Document 112-1 Revised 02/16/05 © Coilcraft, Inc. 2007 Document 112-2 “Slot Seven” 7 mm Tunable Inductors Series 7M2 — Shielded with Plastic Sleeve Part Number 7M2-101 7M2-121 7M2-151 7M2-181 7M2-221 7M2-271 7M2-331 7M2-391 7M2-471 7M2-561 7M2-681 7M2-821 7M2-102 7M2-122 7M2-152 7M2-182 7M2-222 7M2-272 7M2-332 7M2-392 7M2-472 7M2-562 7M2-682 7M2-822 7M2-103 7M2-123 7M2-153 7M2-183 7M2-223 7M2-273 7M2-333 7M2-393 7M2-473 7M2-563 7M2-683 7M2-823 7M2-104 L min (µH) 0.094 0.113 0.141 0.169 0.207 0.254 0.310 0.367 0.442 0.526 0.612 0.738 0.9 1.1 1.4 1.6 2.0 2.4 3.0 3.5 4.2 5.0 6.1 7.4 9.0 10 13 15 19 23 28 33 40 48 58 70 85 L nom (µH) 0.100 0.120 0.150 0.180 0.220 0.270 0.330 0.390 0.470 0.560 0.680 0.820 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 L max (µH) 0.106 0.127 0.159 0.191 0.233 0.286 0.350 0.413 0.498 0.594 0.748 0.902 1.1 1.3 1.7 2.0 2.4 3.0 3.6 4.3 5.2 6.2 7.5 9.0 11 14 17 21 25 31 38 45 54 64 78 94 115 Test frequency 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.6 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz Q min @ L nom 27 27 30 30 35 35 40 40 40 40 40 45 45 27 27 27 27 27 27 27 27 27 27 27 27 20 20 20 20 20 20 20 20 20 20 20 20 DCR max (Ohms) 0.124 0.124 0.151 0.151 0.176 0.198 0.248 0.271 0.291 0.317 0.333 0.368 0.396 0.412 0.466 0.544 0.595 0.898 1.04 1.12 1.38 1.42 1.49 1.65 2.42 2.75 3.71 4.01 7.37 8.48 13.34 14.72 16.42 17.76 19.76 22.01 24.25 Parts in bold are included in Coilcraft Designer’s Kit M106. Typical Q at L nom — Series 7M2 75 Q-Factor -331 50 -181 -102 -101 25 -332 -333 -104 Notes: 1. All readings taken on Agilent/HP 4342-A Q Meter. 2. L min is achieved at maximum extension of the core toward PC board. Complete tuning range is reached within the boundaries of the coil form. 3. All specifications are at standard “Q” meter frequencies. L and Q readings change with frequency. 4. Shielded parts have a sleeve insert to protect the winding. 5. Operating temperature range -40°C to +85°C. 6. Electrical specifications at 25°C. 0 1 10 100 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 112-2 Revised 11/21/02 © Coilcraft, Inc. 2007 Document 112-3 “Slot Seven” 7 mm Tunable Inductors Series 7M3 — Shielded with Ferrite Sleeve Part number 7M3-151 7M3-181 7M3-221 7M3-271 7M3-331 7M3-391 7M3-471 7M3-561 7M3-681 7M3-821 7M3-102 7M3-122 7M3-152 7M3-182 7M3-222 7M3-272 7M3-332 7M3-392 7M3-472 7M3-562 7M3-682 7M3-822 7M3-103 7M3-123 7M3-153 7M3-183 7M3-223 7M3-273 7M3-333 7M3-393 7M3-473 7M3-563 7M3-683 7M3-823 7M3-104 7M3-124 7M3-154 7M3-184 7M3-224 L min (µH) 0.128 0.153 0.187 0.230 0.281 0.332 0.400 0.476 0.544 0.656 0.8 1.0 1.2 1.4 1.8 2.2 2.6 3.1 3.8 4.5 5.4 6.6 8 9 11 14 17 20 25 29 35 42 51 62 75 90 113 135 165 L nom (µH) 0.150 0.180 0.220 0.270 0.330 0.390 0.470 0.560 0.680 0.820 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 L max (µH) 0.173 0.207 0.253 0.311 0.380 0.449 0.541 0.644 0.816 0.984 1.2 1.4 1.8 2.2 2.6 3.2 4.0 4.7 5.6 6.7 8.2 9.8 12 15 19 23 28 34 41 49 59 70 85 103 125 150 188 225 275 Test frequency 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 7.9 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz 2.5 MHz Q min @ L nom 40 45 45 50 50 55 55 60 60 60 60 45 45 45 45 45 40 40 40 40 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 DCR max (Ohms) 0.124 0.124 0.151 0.151 0.151 0.176 0.198 0.198 0.248 0.271 0.317 0.333 0.368 0.396 0.412 0.466 0.544 0.595 0.898 1.04 1.04 1.12 1.38 1.49 1.65 2.42 2.75 3.71 3.71 4.01 7.37 8.48 13.34 14.72 16.42 17.76 19.76 22.01 24.25 Parts in bold are included in Coilcraft Designer’s Kit M106. Typical Q at L nom — Series 7M3 75 -182 -102 -331 -151 Q-Factor 50 -332 -562 -393 25 -683 Notes: 1. All readings taken on Agilent/HP 4342-A Q Meter. 2. L min is achieved at maximum extension of the core toward PC board. Complete tuning range is reached within the boundaries of the coil form. 3. All specifications are at standard “Q” meter frequencies. L and Q readings change with frequency. 4. Shielded parts have a sleeve insert to protect the winding. 5. Operating temperature range -40°C to +85°C. 6. Electrical specifications at 25°C. 0 1 10 100 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 112-3 Revised 11/21/02 © Coilcraft, Inc. 2007 Document 112-4 “Slot Seven” 7 mm Tunable Inductors Typical Self Resonant Frequency At nominal inductance 800 7M2 700 600 Frequency (MHz) 500 400 7M3 300 200 100 0 -101 -221 -331 -561 -102 -182 -332 -562 -103 -183 -333 -563 -104 Dash Number Specifications subject to change without notice. Please check our website for latest information. Document 112-4 Revised 11/21/02 © Coilcraft, Inc. 2007