CTDLW21S-371T01

Common Mode Chokes ctparts.com SPECIFICATIONS CTDLW21S Series From 30 Ω to 370 Ω Part Number Not shown at actual size. CTDLW21SF Please specify “F” for RoHS compliant. Common Mode Imp. @100MHz (Ω) 30±25% 67±25% 90±25% 120±25% 160±25% 180±25% 220±25% 260±25% 300±25% 360±25% 370±25% DCR Max. (Ω) 0.20 0.25 0.30 0.30 0.35 0.35 0.40 0.40 0.45 0.50 0.50 Rated Current (mA) 400 400 400 400 350 350 300 300 300 100 100 Rated Volatge (Vdc) 50 50 50 50 50 50 50 50 50 50 50 Withstand Voltage (Vdc) 125 125 125 125 125 125 125 125 125 125 125 Insulation Resis. Min. (Ω) 10M 10M 10M 10M 10M 10M 10M 10M 10M 10M 10M CTDLW21S_-300T04 CTDLW21S_-670T04 CTDLW21S_-900T04 CTDLW21S_-121T04 CTDLW21S_-161T03 CTDLW21S_-181T03 CTDLW21S_-221T03 CTDLW21S_-261T03 CTDLW21S_-301T03 CTDLW21S_-361T01 CTDLW21S_-371T01 Compliant Available RoHS PHYSICAL DIMENSIONS Size mm inches A 2.0±0.2 0.079±0.008 B 1.2±0.2 0.047±0.008 C 1.2±0.2 0.047±0.008 D 0.4±0.1 0.016±0.004 E 0.4±0.1 F 0.15±0.1 0.016±0.004 0.006±0.004 A CHARACTERISTICS Description: SMD Wire Wound Common Mode Choke Coils for Signal Lines Applications: Suitable for radiation noise suppression for any electronic devices. Used to to counter common mode noise interferance within high speed signal lines. Applications like: USB 2.0 Line for personal computers and peripheral devices, IEEE1394 line for personal computers, DVC etc and LVDS, panel link line for crystal display panels. Operating Temperature: -55°C to +125°C Testing: Impedance is tested on an HP9287A at 100 MHz Packaging: Tape & Reel Marking: Reels marked with part number. Additional Information: Additional electrical & physical information available upon request Miscellaneous: RoHS Compliant available. Samples available. See website for ordering information. C F B 1 2 1 D 2 3 D 4 3 4 E E CTDLW21S-900T04 (only) 4 3 1 2 G G 1.20 0.5 4 3 G: 0.55±0.10 H: 0.46±0.10 1.20 2.70 03.30.05 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL H Unit: mm H PAD LAYOUT 1 2