VSM-CF-36L-5N

FEATURES / BENEFITS p Ultra slim design, less than 1/2” (13mm) high p 70% lumen maintenance @ 50,000+ hr life @ 25ºC ambient temperature VEHICLE SLIM LIGHT SERIES p Low energy use, no IR or UV emissions p Modular “quick connect” system for easy installation p Designed for even LED spacing over linear runs, no hotspots or dark spots between fixtures p Cool to touch, suitable for direct mounting on flammable surfaces p Onboard constant current driver with low voltage input p ETL listed to UL standards for dry locations p Utilizes the latest high efficiency LED technology Frosted Lens Version APPLICATIONS The VSM light has been designed for use in a wide range of interior bus and van lighting applications, areas which benefit from its ultra slim profile, low energy and long operating life. With their slim modular design, the slim lights can be mounted in a variety of combinations and positions to offer the best light output. Offering a superior light output and sleek and slim design, the VSM lights are a perfect solution for interior lighting applications. OPERATING CONDITIONS p Ambient temperature -20ºC to +40ºC (-4ºF to +104ºF) MATERIALS/FINISH p Anodized aluminum module base with polycarbonate lens p Plug & play connector system p Onboard constant current driver p 4 high output 1W LEDs per module p 20AWG, PTFE cable - UL rated E213967, 300V, 80ºC p Input voltage 10-30VDC. Use only class 2 power supplies p Power consumption 5.3W per module Does not include power supply losses p Max # of modules connected per run = 20. Up to 16 modules can be operated on a 100W power supply ORDERING INFORMATION Typical CCT 5000K 4100K Min Luminous Flux per Module (lumens) 288 242 Typical Luminous Flux per Module (lumens) 342 288 Part Number VSM-CF-36L-5N VSM-NF-36L-5N LED Color Cool White Neutral White LED data is LED manufacturers test data at 25ºC Tj. Light output at max acceptable ambient temp will be approximately 15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by additonal 8-10%, and frosted lens by additional 30%. Connectors CL2-E2E = End to end module connector CL2-FLEX = 63mm / 2.5” flexible end to end connector CL2-EXTEND = 952mm / 37.5” flexible end to end connector (sold separately) CL2-START = 3m / 9’ 10” start cable (power supply to first module) CL2-END = End plug Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTBVSMCL2_A MECHANICAL DIMENSIONS Dimensions in inches (mm) Total power consumption of modules should not exceed rating of power supply PHOTOMETRIC DATA VSM Module with Clear Lens (Normalized Data) 2 VSM modules with start cable, end to end connector, and end plug 2 VSM modules with start cable, flex connector, and end plug IES 32 files available - consult factory Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTBVSMCL2_A