SBR3A40SA

  Green SBR3A40SA 3.0A SBR® SUPER BARRIER RECTIFIER SMA Please click here to visit our online spice models database. Features • • • • • • Low Leakage Current Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) Green Molding Compound (No Halogen and Antimony) (Note 7) Mechanical Data • • • • • • • • Case: SMA Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Lead Free Plating (Matte Tin Finish.) Solderable per MIL-STD-202, Method 208 Polarity Indicator: Cathode Band Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.064 grams (approximate) Top View Bottom View Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Maximum Voltage Rate of Change (Rated VR) RMS Reverse Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM dv/dt VR(RMS) IO IFSM Value 40 10,000 28 3 45 Unit V V/μs V A A Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Soldering (Note 2) Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Symbol RθJS RθJA TJ, TSTG Value 5 124 -65 to +150 Unit ºC/W ºC Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 5) Forward Voltage Drop @TA = 25°C unless otherwise specified Symbol V(BR)R VF Min 40 Typ 0.30 0.33 0.43 45 80 9 Max 0.35 0.38 0.50 0.48 250 400 40 Unit V V μA μA mA Test Condition IR = 0.4mA IF = 0.5A, TJ = 25ºC IF = 1.0A, TJ = 25ºC IF = 3.0A, TJ = 25ºC IF = 3.0A, TJ = 125ºC VR = 5V, TJ = 25ºC VR = 40V, TJ = 25ºC VR = 40V, TJ = 125ºC Leakage Current (Note 5) Notes: IR - 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/quality/lead_free.html. 2. Theoretical RθJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. 3. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 5. Short duration pulse test used to minimize self-heating effect. 6. FR-4 PCB, 2 oz. Copper, single side 16 x MRP, 1” x 1” PC Board. 7. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound. SBR is a registered trademark of Diodes Incorporated. SBR3A40SA Document number: DS31107 Rev. 10 - 2 1 of 4 www.diodes.com July 2009 © Diodes Incorporated SBR3A40SA IF, INSTANTANEOUS FORWARD CURRENT (mA) 1.6 1.4 PD, POWER DISSIPATION (W) 1.2 1 0.8 0.6 0.4 0.2 0 10,000 1,000 TA = 125°C 100 T A = 85°C TA = 25°C 10 1 0 0.2 0.4 0.6 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 0 1 2 3 4 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation IR, INSTANTANEOUS REVERSE CURRENT (mA) 100 TA = 150°C T A = 125°C 10,000 CT, TOTAL CAPACITANCE (pF) 10 1,000 1 TA = 85°C 0.1 TA = 25°C 100 0.01 10 0.001 TA = -65°C 0.0001 0 5 10 15 20 25 30 35 40 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics TA, DERATED AMBIENT TEMPERATURE (°C) 1 0.1 100 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 3.5 IF(AV), AVERAGE FORWARD CURRENT (A) 3.0 2.5 2.0 1.5 1.0 0.5 0 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 150 150 125 100 75 50 25 0 0 5 10 15 20 25 30 35 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 40 SBR is a registered trademark of Diodes Incorporated. SBR3A40SA Document number: DS31107 Rev. 10 - 2 2 of 4 www.diodes.com July 2009 © Diodes Incorporated SBR3A40SA Ordering Information Part Number SBR3A40SA-13 Notes: (Note 8) Case SMA Packaging 5000/Tape & Reel 8. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information SV 4 = Product Type Marking Code = Manufacturers’ code marking YWW = Date Code Marking Y = Last digit of year (ex: 7 for 2007) WW = Week code 01 to 52 YWW SV 4 XX Package Outline Dimensions B SMA Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 H 0.76 1.52 J 2.01 2.30 All Dimensions in mm A C D J H G E Suggested Pad Layout Dimensions Value (in mm) Z 6.5 G 1.5 X 1.7 Y 2.5 C 4.0 SBR is a registered trademark of Diodes Incorporated. SBR3A40SA Document number: DS31107 Rev. 10 - 2 3 of 4 www.diodes.com July 2009 © Diodes Incorporated SBR3A40SA IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR3A40SA Document number: DS31107 Rev. 10 - 2 4 of 4 www.diodes.com July 2009 © Diodes Incorporated