07SR-3S

IDC SR CONNECTOR Emboss Tape 1.0mm (.039") pitch Disconnectable Insulation displacement connectors Features –––––––––––––––––––––––– • Ultra-compact insulation displacement connector 1.0mm (.039") pitch and only 3.0mm (.118") high (side entry type). This connector is only about 61% as large as the smallest conventional (JST) IDC designs. • Header designed for vacuum pick and place robotics Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum grippig equipment. Since there is enough flat surface for secure vacuum gripping, this miniature surface mount connector is versatile for designers and economic for manufacturing. • Twin U-slot insulation displacement section The insulation displacement section connected to each wire consists of two tin-plated slots (twin U-slots), which ensures reliable connection. • 3-point grip construction The 3-point insulation grip feature and the strain relief ensure a firm grip on terminated wires and protection of the insulation displacement connection from possible damage. JS T 9 Specifications ––––––––––––––––––– • Current rating: 0.7A DC • Voltage rating: 50V DC • Temperature range: -25˚C to +85˚C(including temperature rise in applying electrical current) • Contact resistance: Initial value/20m Ω max. After environmental testing/40m Ω max. • Insulation resistance: 100M Ω min. • Withstanding voltage: 500V AC/minute • Applicable wire: AWG #30 Conductor/7 strands, tin-coated annealed copper Insulation O.D./0.56mm (.022") * Contact JST for details. Standards –––––––––––––––––––––– 0 1 Recognized E60389 Certified LR20812 223 SR CONNECTOR Receptacle ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 2 3 B 2.45(.097) Model No. 02SR-3S 03SR-3S 04SR-3S 05SR-3S 06SR-3S 07SR-3S 08SR-3S 09SR-3S 10SR-3S 11SR-3S 12SR-3S 13SR-3S 14SR-3S Dimensions mm(in.) A 1.0(.039) 2.0(.079) 3.0(.118) 4.0(.157) 5.0(.197) 6.0(.236) 7.0(.276) 8.0(.315) 9.0(.354) 10.0(.394) 11.0(.433) 12.0(.472) 13.0(.512) B 3.0(.118) 4.0(.157) 5.0(.197) 6.0(.236) 7.0(.276) 8.0(.315) 9.0(.354) 10.0(.394) 11.0(.433) 12.0(.472) 13.0(.512) 14.0(.551) 15.0(.591) Q’ty / box 3,000 3,000 3,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 4 5 6 7 3.6(.142) 8 9 10 1.0 (.039) A 2.1(.083) 11 12 13 14 Material and Finish Contact: Phosphor bronze, tin-plated Housing: Polyamide 66, UL94V-0, natural (ivory) Shrouded header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Side entry type B Dimensions mm(in.) Circuits 2 Top entry type BM02B-SRSS-TB BM03B-SRSS-TB BM04B-SRSS-TB BM05B-SRSS-TB BM06B-SRSS-TB BM07B-SRSS-TB BM08B-SRSS-TB BM09B-SRSS-TB BM10B-SRSS-TB BM11B-SRSS-TB BM12B-SRSS-TB BM13B-SRSS-TB BM14B-SRSS-TB Side entry type SM02B-SRSS-TB SM03B-SRSS-TB SM04B-SRSS-TB SM05B-SRSS-TB SM06B-SRSS-TB SM07B-S RSS-TB SM08B-SRSS-TB SM09B-SRSS-TB SM10B-SRSS-TB SM11B-SRSS-TB SM12B-SRSS-TB SM13B-SRSS-TB SM14B-SRSS-TB A 1.0(.039) 2.0(.079) 3.0(.118) 4.0(.157) 5.0(.197) 6.0(.236) 7.0(.276) 8.0(.315) 9.0(.354) 10.0(.394) 11.0(.433) 12.0(.472) 13.0(.512) B 4.0(.157) 5.0(.197) 6.0(.236) 7.0(.276) 8.0(.315) 9.0(.354) 10.0(.394) 11.0(.433) 12.0(.472) 13.0(.512) 14.0(.551) 15.0(.591) 16.0(.630) Top entry type 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 Q'ty / reel Side entry type 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 2.9(.114) 3 4 1.0 (.039) A 1.5 (.059) 4.25(.167) 0.7(.028) 5 6 7 Top entry type B 8 9 10 11 4.25(.167) 12 13 14 1.0 (.039) A 0.7(.028) 1.5 (.059) 2.9(.114) Material and Finish Contact: Copper alloy, copper-undercoated, tin/lead plated Wafer: Polyamide, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin/lead plated Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the top entry type headers with suction cap. PC board layout (viewed from component side) and Assembly layout –––––––––––––––––– Top entry type 2.9(.114) 0.6 ± 0.05 (.024 ± .002) 1.0 ± 0.05 (.039 ± .002) Side entry type 0.6 ± 0.05 (.024 ± .002) 1.0 ± 0.05 (.039 ± .002) 4.85(.191) 1.8 ± 0.1 (.071 ± .004) Shrouded header 0.7 ± 0.1 (.028 ± .004) 1.2 ± 0.1 (.047 ± .004) 0.2 ± 0.1 (.008 ± .004) Shrouded header 0.7 ± 0.1 (.028 ± .004) 1.2 ± 0.1 (.047 ± .004) 224 Note: 1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers. 2. Dimensions above should serve as a guideline. Contact JST for details. 0.2 ± 0.1 (.008 ± .004) 1.8 ± 0.1 (.071 ± .004) 4.9(.193) 4.0 ± 0.1 (.157 ± .004) 2.65 ± 0.1 (.104 ± .004) 2.95(.116) 5.55 ± 0.1 (.219 ± .004) 4.2 ± 0.1 (.165 ± .004) SR CONNECTOR Taping specifications –––––––––––––––––––––––––––––––––––––––––––––––––––––– Feeding direction Feeding direction Carrier tape Cover tape leader area 380 ± 2.0 (14.961 ± .079)dia [100(3.937)dia.] 13.0(.512)dia. W1 +2.5 -1.0 (W1+.098 ) -.039 2.0 ± 0.5 (.079 ± .002) Tail tape (Unloaded area) 40(1.575) min. Connector loaded area Lead tape (Unloaded area) 20 vacancies min. 400(15.748) min. Top entry type Feeding direction 4.0±0.1 (.157±.004) 2.0±0.1 (.079±.004) 1.75±0.1 (.069±.004) Side entry type Feeding direction 4.0 ± 0.1 (.157 ± .004) 1.55 ± 0.05 (.061 ± .002)dia. 2.0 ± 0.1 (.079 ± .004) 1.75 ± 0.1 (.069 ± .004) Cover tape 1.55±0.05 (.061±.002)dia. Cover tape F±0.1 (.004) F ± 0.1 (.004) Carrier tape W ± 0.3(.012) W±0.3(.012) Carrier tape (S) 12±0.1 (.315±.004) 0.38±0.05 (.015±.002) 4.55 (.179) (S) 0.38 ± 0.05 (.015 ± .002) 8.0 ± 0.1 (.315 ± .004) 3.25 (.128) Circuits F Top entry type 5.5(.217) 7.5(.295) 7.5(.295) 11.5(.453) 11.5(.453) Taping dimensions mm(in.) S Side entry type 5.5(.217) 5.5(.217) 7.5(.295) 7.5(.295) 11.5(.453) W Top entry type 12(.472) 16(.630) 16(.630) 24(.945) 24(.945) Reel dimensions mm(in.) W1 Side entry type 12(.472) 12(.472) 16(.630) 16(.630) 24(.945) Q'ty / reel Top entry type 1,500 1,500 1,500 1,500 1,500 Top entry type 4.75(.187) 6.75(.266) 6.75(.266) 10.75(.423) 10.75(.423) Side entry type 4.75(.187) 4.75(.187) 6.75(.266) 6.75(.266) 10.75(.423) Top entry type 13.5(.531) 17.5(.689) 17.5(.689) 25.5(1.004) 25.5(1.004) Side entry type 13.5(.531) 13.5(.531) 17.5(.689) 17.5(.689) 25.5(1.004) Side entry type 3,000 3,000 3,000 3,000 3,000 2 to 3 4 5 to 7 8 9 to 14 Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. 225