MOAC5A

IAC5, IDC5, OAC5, ODC5 5 VDC SOLID-STATE OPTO-ISOLATED I/O MODULES • Available in Standard or Mini-Pack Solid state I/O switching modules deliver an electrically clean, photo-isolated, noise-free "output" interface from logic level control systems to external loads such as motors, valves, solenoids, etc. -- or an "input" interface from the load or sensors to microprocessor or computer-based logic level systems. Designed for long, reliable service in demanding industrial environments. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. SYSTEM VOLTAGE 5 Vdc Model Number MINI-PACK Voltage Type Color Code IAC5 MIAC5 IAC5A MIAC5A IDC5 MIDC5 IDC5B MIDC5B OAC5 MOAC5 OAC5A MOAC5A ODC5 MODC5 ODC5A MODC5A AC or DC Input AC or DC Input Yellow Yellow DC Input White DC Input White AC Output Black AC Output Black DC Output Red DC Output Red INPUT SPECIFICATIONS Voltage Range Typical Current @ Rated Voltage Typical Current @ Maximum Voltage 90-140 Vac 180-280 Vac 10-36 Vdc 7 mA 8 mA 5 mA 5.5 mA 8 mA 10 mA 3-32 Vdc 13 mA 15 mA 3-6 Vdc 19 mA 22 mA 3-6 Vdc 19 mA 22 mA 3-6 Vdc 14 mA 18 mA 3-6 Vdc 14 mA 18 mA OUTPUT SPECIFICATIONS Load Current Over Load Voltage Range Maximum Turn-on Time Maximum Turn-off Time Frequency Range Switching Type Max. Surge (non-repetitive) Max. Off-State Voltage Notes NOTES .1-100 mA @ .1-100 mA @ .1-100 mA @ .1-100 mA @ .02-3A @ .02-3A @ .4-30 Vdc .4-30 Vdc .4-30 Vdc .4-30 Vdc 12-140 Vac 24-280 Vac 20 ms 20 ms 47-63Hz Random 100mA 30Vdc 1,2,4,6 20 ms 20 ms 47-63Hz Random 100mA 30Vdc 1,2,4,6 5 ms 5 ms ---Random 30Vdc 30Vdc 1,2,4 1 ms 1 ms ---Random 30Vdc 30Vdc 1,2,4 1/ 2 1/ 2 .02-3A @ 5-60 Vdc 0.3 ms 0.3 ms ---Random 5A (1 sec) 60Vdc 1,2,3 .02-1A @ 10-200 Vdc 0.5 ms 0.5 ms ---Random 5A (1 sec) 200Vdc 1,2,3 Cycle Cycle 1/ 2 1/ 2 Cycle Cycle 47-63Hz Zero 400Vpk 1,2,3 47-63Hz Zero 600Vpk 1,2,3 80Apk (1cycle) 80Apk (1cycle) ©1998 CRYDOM CORP Specifications subject to change without notice. 1. UL recognized. 2. CSA certified. 3. The output of the AC output module is compatible with the input of the AC input module and the output of the DC output module is compatible with the input of the DC input module. 4. Input modules provide an output that is active low. 5. Output modules can be controlled from active or active high logic. 6. Input will operate on AC or DC voltage. 7. Inductive loads should be diode suppressed for all DC output devices. FastFax Document No. 301 I/OMOD5V.040898, PAGE 1 OF 2 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: sales@crydom.com WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49)871 935405 • fax (49)871 935407, Aussere Parkstr.5, D-84032 Altdorf, Germany 9002 IAC5, IDC5, OAC5, ODC5 5 VDC SOLID-STATE OPTO-ISOLATED I/O MODULES G ENERAL SPECIFICATIONS Input/Output Isolation Voltage Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range MECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation: 4000 Vrms 109 Ohm 16 pF -40 to 80ºC -40 to 125ºC 0.6 oz. (17g) Thermally Conductive Epoxy IAC/IDC BOTTOM VIEW OAC/ODC BOTTOM VIEW MINI-PACK MIAC, MIDC (5 pin models) MOAC, MODC (4 pin models) .30 (7.6) .60 (15.2 BOTTOM VIEW .40 (10.2) .30 (7.6) .60 (15.2) CAPTIVE #4-40. PHILLIPS HEAD HOLD DOWN SCREW CAPTIVE #4-40. PHILLIPS HEAD HOLD DOWN SCREW 1.70 (43.1) 1.00 (25.4) .100 (2.5) 1.70 (43.1) 1.00 (25.4) .100 (2.5) .100 (2.5) 1.25 (31.7) 1.25 (31.7) 1.00 (25.4) .25 (6.35) 5 4 3+ 2 1 .25 (6.3) 5 4 3 2 1 .030 (0.8) .30 (7.6) .25 (6.3) 4 3 2 1 .030 (0.8) .30 (7.6) .30 (7.6) .200 (5.1) .700 (17.8) 1.100 (27.9) 1.30 (43.1) 1.70 (43.1) .040 (1.0) DIA. (4 PLACES) .70 (17.8) 1.20 (30.5) 1.40 (35.5) 1.60 (40.6) .040 (1.0) DIA. (4 PLACES) .70 (17.8) 1.20 (30.5) 1.40 (35.5) .040 (1.0) DIA. (4 PLACES) All dimensions are in inches (millimeters) ©1998 CRYDOM CORP Specifications subject to change without notice. FastFax Document No. 301 I/OMOD5V.040898, PAGE 2 OF 2 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: sales@crydom.com WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49)871 935405 • fax (49)871 935407, Aussere Parkstr.5, D-84032 Altdorf, Germany 9002