IPP020N06N

Type IPP020N06N OptiMOSTM Power-Transistor Features Product Summary • Optimized for high performance SMPS, e.g. sync. rec. • 100% avalanche tested • Superior thermal resistance • N-channel 1) • Qualified according to JEDEC for target applications VDS 60 V RDS(on),max 2.0 mW ID 120 A QOSS 119 nC QG(0V..10V) 106 nC • Pb-free lead plating; RoHS compliant • Halogen-free according to IEC61249-2-21 PG-TO220-3 Type Package Marking IPP020N06N PG-TO220-3 020N06N Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Continuous drain current ID Value V GS=10 V, T C=25 °C 120 V GS=10 V, T C=100 °C 120 V GS=10 V, T C=25 °C, R thJA =50K/W 29 Unit A Pulsed drain current2) I D,pulse T C=25 °C 480 Avalanche energy, single pulse3) E AS I D=100 A, R GS=25 W 420 mJ Gate source voltage V GS ±20 V 1) J-STD20 and JESD22 2) See figure 3 for more detailed information 3) See figure 13 for more detailed information 4) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev.2.3 page 1 2012-12-20 IPP020N06N Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Power dissipation P tot Operating and storage temperature Value T C=25 °C 214 T A=25 °C, R thJA=50 K/W 3.0 T j, T stg W -55 ... 175 IEC climatic category; DIN IEC 68-1 Parameter Unit °C 55/175/56 Values Symbol Conditions Unit min. typ. max. Thermal characteristics Thermal resistance, junction - case R thJC bottom - - 0.7 Device on PCB R thJA minimal footprint - - 62 6 cm² cooling area4) - - 40 K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=1 mA 60 - - Gate threshold voltage V GS(th) V DS=V GS, I D=143 µA 2.1 2.8 3.3 Zero gate voltage drain current I DSS V DS=60 V, V GS=0 V, T j=25 °C - 0.5 1 V DS=60 V, V GS=0 V, T j=125 °C - 10 100 V µA Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 10 100 nA Drain-source on-state resistance R DS(on) V GS=10 V, I D=100 A - 1.8 2 mW V GS=6 V, I D=25 A - 2.1 3 - 1.6 2.4 W 100 210 - S Gate resistance RG Transconductance g fs Rev.2.3 |V DS|>2|I D|R DS(on)max, I D=100 A page 2 2012-12-20 IPP020N06N Parameter Values Symbol Conditions Unit min. typ. max. - 7800 9750 - 1800 2250 Dynamic characteristics Input capacitance C iss V GS=0 V, V DS=30 V, f =1 MHz pF Output capacitance C oss Reverse transfer capacitance Crss - 69 138 Turn-on delay time t d(on) - 24 - Rise time tr - 45 - Turn-off delay time t d(off) - 51 - Fall time tf - 19 - Gate to source charge Q gs - 35 - Gate charge at threshold Q g(th) - 22 - Gate to drain charge Q gd - 19 25 Switching charge Q sw - 33 - Gate charge total Qg - 106 124 Gate plateau voltage V plateau - 4.5 - V Gate charge total, sync. FET Q g(sync) V DS=0.1 V, V GS=0 to 10 V - 94 - nC Output charge Q oss V DD=30 V, V GS=0 V - 119 - - - 120 - - 480 - 0.9 1.2 V - 76 122 ns - 97 - nC V DD=30 V, V GS=10 V, I D=100 A, R G,ext,ext=3 W ns Gate Charge Characteristics5) V DD=30 V, I D=100 A, V GS=0 to 10 V nC Reverse Diode Diode continuous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD Reverse recovery time t rr Reverse recovery charge Q rr 5) A T C=25 °C V GS=0 V, I F=100 A, T j=25 °C V R=30 V, I F=100 A, di F/dt =100 A/µs See figure 16 for gate charge parameter definition Rev.2.3 page 3 2012-12-20 IPP020N06N 1 Power dissipation 2 Drain current P tot=f(T C) I D=f(T C); V GS≥10 V 240 140 220 120 200 180 100 160 80 ID [A] Ptot [W] 140 120 60 100 80 40 60 40 20 20 0 0 0 25 50 75 100 125 150 175 200 0 25 50 TC [°C] 75 100 125 150 175 200 TC [°C] 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T C=25 °C; D =0 Z thJC=f(t p) parameter: t p parameter: D =t p/T 103 10 limited by on-state resistance 1 µs 10 µs 102 1 100 µs 0.5 ZthJC [K/W] 1 ms ID [A] 10 ms 101 DC 0.2 0.1 0.1 0.05 0.02 100 0.01 0.01 single pulse 10-1 10-1 100 101 102 VDS [V] Rev.2.3 0.001 0.000001 0.00001 0.0001 0.001 0.01 0.1 tp [s] page 4 2012-12-20 IPP020N06N 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 480 5 10 V 440 6V 5V 7V 5.5 V 400 4 360 5.5 V RDS(on) [mW] 320 ID [A] 280 240 200 5V 3 6V 7V 2 10 V 160 120 1 80 40 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 80 160 VDS [V] 240 320 400 480 100 120 ID [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 480 240 440 400 200 360 320 160 gfs [S] ID [A] 280 240 120 200 160 80 120 80 40 175 °C 40 25 °C 0 0 0 2 4 6 8 VGS [V] Rev.2.3 0 20 40 60 80 ID [A] page 5 2012-12-20 IPP020N06N 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=100 A; V GS=10 V V GS(th)=f(T j); V GS=V DS 4.5 5 4 4 3.5 3 max 2.5 2 VGS(th) [V] RDS(on) [mW] 3 typ 1430 mA 143 µA 2 1.5 1 1 0.5 0 0 -60 -20 20 60 100 140 180 -60 -20 20 Tj [°C] 60 100 140 180 Tj [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 104 103 10000 Ciss Coss 102 1000 IF [A] C [pF] 103 25 °C 175 °C 102 101 100 Crss 101 100 10 0 20 40 60 VDS [V] Rev.2.3 0 0.5 1 1.5 2 VSD [V] page 6 2012-12-20 IPP020N06N 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 W V GS=f(Q gate); I D=100 A pulsed parameter: T j(start) parameter: V DD 1000 12 30 V 10 12 V 100 48 V 8 100 °C VGS [V] IAV [A] 25 °C 125 °C 10 6 4 2 1 1 10 100 0 1000 0 20 tAV [µs] 40 60 80 100 120 Qgate [nC] 15 Drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS)=f(T j); I D=1 mA 70 V GS Qg VBR(DSS) [V] 66 62 V gs(th) 58 54 Q g(th) Q sw Q gs 50 -60 -20 20 60 100 140 Q gate Q gd 180 Tj [°C] Rev.2.3 page 7 2012-12-20 IPP020N06N Package Outline Rev.2.3 PG-TO220-3 page 8 2012-12-20 IPP020N06N Published by Infineon Technologies AG 81726 Munich, Germany © 2011 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev.2.3 page 9 2012-12-20