67-11-BHC-FQ2S1F-2T

Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․ESD protection. Descriptions ․The 67-11 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light guide application. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Material InGaN Blue Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 1 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 2 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 100 95 2000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Max. 225 --------472 ----3.50 Unit mcd deg nm nm nm V Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA Electro-Optical Characteristics (Ta=25℃) Parameter Luminous intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Symbol IV 2θ1/2 λp λd △λ VF Min. 90 --------464 ----2.70 Typ. ----120 468 ---25 ----- Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Forward Voltage: ±0.1V 3.Tolerance of Peak Wavelength: ±1nm Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 3 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T Bin Rang of Luminous Intensity Bin Q2 R1 R2 S1 Min 90 112 140 180 Max 112 140 180 225 mcd IF=20mA Unit Condition Bin Range of Dominant Wavelength Group Bin AA1 F AA2 AA3 AA4 Min 464 466 468 470 Max 466 468 470 472 nm IF=20mA Unit Condition Bin Range of Forward Voltage Group Bin 10 F 11 12 13 Min 2.70 2.90 3.10 3.30 Max 2.90 3.10 3.30 3.50 V IF=20mA Unit Condition Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Forward Voltage: ±0.1V 3.Tolerance of Peak Wavelength: ±1nm Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 4 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T Typical Electro-Optical Characteristics Curves Spectrum Distribution Relative Luminous Intensity (%) Ta=25° 100 50 Forward Current IF (mA) 40 30 20 10 0 24 2.6 3.0 3.4 3.8 4.2 Forward Current vs. Forward Voltage Ta=25° 0 25 50 75 400 450 500 550 600 Wavelength λ (nm) Forward Voltage( vF)-volts Relative Luminous Intensity vs Relative luminous intensity (%) Forward Current 1000 Ta=25° Relative Luminous Intensity (%) Relative Luminous Intensity vs. 1000 Ambient Temperature 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 1 0 10 Ambient Temperature Ta (°C ) Forward Current Derating Curve Forward Current IF (mA) 50 40 30 20 10 0 0 20 0.9 1.0 1 10 Forward Current 2 10 I F (mA) Radiation Diagram 0° 10° 20° Ta=25° 30° 40° 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 40 60 85 100 Ambient Temperature T (°C ) a Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 0.7 0.8 Rev. 1 Page: 5 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT R oHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 6 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs. Per Reel Note: Tolerances unless dimension are ±0.1mm, unit = mm. Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Reliability Test Items And Conditions Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 7 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 Items Reflow Soldering Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Test Hours/Cycles 6 Min. Sample Size 22 PCS. Ac/Re 0/1 Precautions for Use Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 8 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hour 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 9 of 10 Prepared by: Ya_Hui Fang Technical Data Sheet Top View LEDs 67-11/BHC-FQ2S1F/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. :DSE-0001709 http://www.everlight.com Prepared date: 19-Mar-2009 Rev. 1 Page: 10 of 10 Prepared by: Ya_Hui Fang