74VCX16827_02

74VCX16827 Low Voltage 20-Bit Buffer/Line Driver with 3.6V Tolerant Inputs and Outputs March 1998 Revised October 2002 74VCX16827 Low Voltage 20-Bit Buffer/Line Driver with 3.6V Tolerant Inputs and Outputs General Description The VCX16827 contains twenty non-inverting buffers with 3-STATE outputs to be employed as a memory and address driver, clock driver, or bus oriented transmitter/ receiver carrying parity. The device is byte controlled. Each byte has NOR output enables for maximum control flexibility. The 74VCX16827 is designed for low voltage (1.2V to 3.6V) VCC applications with I/O capability up to 3.6V. The 74VCX16827 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. Features s 1.2V to 3.6V VCC supply operation s 3.6V tolerant inputs and outputs s tPD 2.5 ns max for 3.0V to 3.6V VCC s Power-off high impedance inputs and outputs s Supports live insertion and withdrawal (Note 1) s Static Drive (IOH/IOL) ±24 mA @ 3.0V VCC s Uses patented noise/EMI reduction circuitry s Latch-up performance exceeds 300 mA s ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number 74VCX16827MTD Package Number MTD56 Package Description 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Pin Descriptions Pin Names OEn I0–I19 O0–O19 Description Output Enable Input (Active LOW) Inputs Outputs © 2002 Fairchild Semiconductor Corporation DS500131 www.fairchildsemi.com 74VCX16827 Connection Diagram Truth Tables Inputs OE1 L L H X OE2 L L X H Inputs OE3 L L H X OE4 L L X H I0–I9 L H X X I0–I9 L H X X Outputs O0–O9 L H Z Z Outputs O10–O19 L H Z Z H = H IGH Voltage Level L = LOW Voltage Level X = Immaterial (HIGH or LOW, inputs may not float) Z = High Impedance Functional Description The 74VCX16827 contains twenty non-inverting buffers with 3-STATE outputs. The device is byte controlled with each byte functioning identically, but independent of each other. The control pins may be shorted together to obtain full 16-bit operation. The 3-STATE outputs are controlled by Output Enable (OEn) inputs. When OE1, and OE2 are LOW, O0—O10 are in the 2-state mode. When either OE1 or OE2 are HIGH, the standard outputs are in the high impedance mode but this does not interfere with entering new data into the inputs. The same applies for byte two with OE3 and OE4. Logic Diagrams www.fairchildsemi.com 2 74VCX16827 Absolute Maximum Ratings(Note 2) Supply Voltage (VCC) DC Input Voltage (VI) Output Voltage (VO) Outputs 3-STATED Outputs Active (Note 3) DC Input Diode Current (IIK) VI < 0V DC Output Diode Current (IOK) VO < 0V VO > VCC DC Output Source/Sink Current (IOH/IOL) DC VCC or GND Current per Supply Pin (ICC or GND) Storage Temperature Range (TSTG) −0.5V to +4.6V −0.5V to +4.6V −0.5V to +4.6V −0.5V to VCC + 0.5V −50 mA −50 mA +50 mA ±50 mA ±100 mA −65°C to +150°C Recommended Operating Conditions (Note 4) Power Supply Operating Input Voltage Output Voltage (VO) Output in Active States Output in 3-STATE Output Current in IOH/IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 2.3V VCC = 1.4V to 1.6V VCC = 1.2V Free Air Operating Temperature (TA) Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused inputs must be held HIGH or LOW. 1.2V to 3.6V −0.3V to +3.6V 0V to VCC 0.0V to 3.6V ±24 mA ±18 mA ±6 mA ±2 mA ± 100 µA −40°C to +85°C DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage Conditions VCC (V) 2.7 - 3.6 2.3 - 2.7 1.65 - 2.3 1.4 - 1.6 1.2 VIL LOW Level Input Voltage 2.7 - 3.6 2.3 - 2.7 1.65 - 2.3 1.4 - 1.6 1.2 VOH HIGH Level Output Voltage IOH = −100 µA IOH = −12 mA IOH = −18 mA IOH = −24 mA IOH = −100 µA IOH = −6 mA IOH = −12 mA IOH = −18 mA IOH = −100 µA IOH = −6 mA IOH = −100 µA IOH = −2 mA IOH = −100 µA 2.7 - 3.6 2.7 3.0 3.0 2.3 - 2.7 2.3 2.3 2.3 1.65 - 2.3 1.65 1.4 - 1.6 1.4 1.2 VCC - 0.2 2.2 2.4 2.2 VCC - 0.2 2.0 1.8 1.7 VCC - 0.2 1.25 VCC - 0.2 1.05 VCC - 0.2 V 2.0 1.6 0.65 x VCC 0.65 x VCC 0.65 x VCC 0.8 0.7 0.35 x VCC 0.35 x VCC 0.05 x VCC V V Min Max Units 3 www.fairchildsemi.com 74VCX16827 DC Electrical Characteristics Symbol VOL Parameter LOW Level Output Voltage (Continued) VCC (V) 2.7 - 3.6 2.7 3.0 3.0 2.3 - 2.7 2.3 2.3 1.65 - 2.3 1.65 1.4 - 1.6 1.4 1.2 1.2 - 3.6 1.2 − 3.6 0 1.2 - 3.6 1.2 - 3.6 2.7 - 3.6 Conditions IOL = 100 µA IOL = 12 mA IOL = 18 mA IOL = 24 mA IOL = 100 µA IOL = 12 mA IOL = 18 mA IOL = 100 µA IOL = 6 mA IOL = 100 µA IOL = 2 mA IOL = 100 µA Min Max 0.2 0.4 0.4 0.55 0.2 0.4 0.6 0.2 0.3 0.2 0.35 0.05 ±5.0 ±10 10 20 ±20 750 Units V II IOZ IOFF ICC ∆ICC Input Leakage Current 3-STATE Output Leakage Power-OFF Leakage Current Quiescent Supply Current Increase in ICC per Input 0 ≤ VI ≤ 3.6V 0 ≤ VO ≤ 3.6V VI = VIH or VIL 0 ≤ (VI, VO) ≤ 3.6V VI = VCC or GND VCC ≤ (VI, VO) ≤ 3.6V (Note 5) VIH = VCC −0.6V µA µA µA µA µA Note 5: Outputs disabled or 3-STATE only. www.fairchildsemi.com 4 74VCX16827 AC Electrical Characteristics Symbol tPHL, tPLH Parameter Propagation Delay (Note 6) Conditions VCC (V) 3.3 ± 0.3 2.5 ± 0.2 1.8 ± 0.15 TA = −40°C to +85°C Min 0.8 1.0 1.5 1.0 1.5 0.8 1.0 1.5 1.0 0.8 1.0 1.5 1.0 Max 2.5 3.0 6.0 12.0 30 3.8 4.9 9.8 19.6 49 3.7 4.2 7.6 15.2 38 0.5 0.5 0.75 1.5 1.5 ns ns Figures 5, 7, 8 Figures 1, 3, 4 ns Figures 5, 7, 8 Figures 1, 3, 4 ns Figures 5, 6 Figures 1, 2 Units Figure Number CL = 30 pF, RL = 500Ω CL = 15 pF, RL = 2kΩ tPZL, tPZH CL = 15 pF, RL = 2kΩ tPLZ, tPHZ CL = 15 pF, RL = 2kΩ tOSHL tOSLH Output to Output Skew (Note 7) CL = 15 pF, RL = 2kΩ Note 6: For CL = 50 PF, add approximately 300 ps to the AC maximum specification. 1.5 ± 0.1 1.2 3.3 ± 0.3 2.5 ± 0.2 1.8 ± 0.15 1.5 ± 0.1 1.2 3.3 ± 0.3 2.5 ± 0.2 1.8 ± 0.15 1.5 ± 0.1 1.2 3.3 ± 0.3 2.5 ± 0.2 1.8 ± 0.15 1.5 ± 0.1 1.2 Output Enable Time CL = 30 pF, RL = 500Ω Output Disable Time CL = 30 pF, RL = 500Ω CL = 30 pF, RL = 500Ω Note 7: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Dynamic Switching Characteristics Symbol VOLP Parameter Quiet Output Dynamic Peak VOL Conditions CL = 30 pF, VIH = VCC, VIL = 0V VCC (V) 1.8 2.5 3.3 VOLV Quiet Output Dynamic Valley VOL CL = 30 pF, VIH = VCC, VIL = 0V 1.8 2.5 3.3 VOHV Quiet Output Dynamic Valley VOH CL = 30 pF, VIH = VCC, VIL = 0V 1.8 2.5 3.3 TA = +25°C Typical 0.25 0.6 0.8 −0.25 −0.6 −0.8 1.5 1.9 2.2 V V V Units Capacitance Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance Parameter Conditions VCC = 1.8, 2.5V or 3.3V, VI = 0V or VCC VI = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V VI = 0V or VCC, f = 10 MHz, VCC = 1.8V, 2.5V or 3.3V TA = +25°C Typical 6 7 20 Units pF pF pF 5 www.fairchildsemi.com 74VCX16827 AC Loading and Waveforms (VCC 3.3V ± 0.3V to 1.8V ± 0.15V) TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ SWITCH Open 6V at VCC = 3.3V ± 0.3V; VCC x 2 at VCC = 2.5V ± 0.2V; 1.8V ± 0.15V GND FIGURE 1. AC Test Circuit FIGURE 2. Waveform for Inverting and Non-Inverting Functions FIGURE 3. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 4. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic Symbol Vmi Vmo VX VY VCC 3.3V ± 0.3V 1.5V 1.5V VOL + 0.3V VOH − 0.3V 2.5V ± 0.2V VCC/2 VCC/2 VOL + 0.15V VOH − 0.15V 1.8V ± 0.15V VCC/2 VCC/2 VOL + 0.15V VOH − 0.15V www.fairchildsemi.com 6 74VCX16827 AC Loading and Waveforms (VCC 1.5V ± 0.1V to 1.2V) TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ SWITCH Open VCC x 2 at VCC = 1.5V ± 0.1V GND FIGURE 5. AC Test Circuit FIGURE 6. Waveform for Inverting and Non-Inverting Functions FIGURE 7. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 8. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic Symbol Vmi Vmo VX VY VCC 2.5V ± 0.2V VCC/2 VCC/2 VOL + 0.15V VOH − 0.15V 7 www.fairchildsemi.com 74VCX16827 Low Voltage 20-Bit Buffer/Line Driver with 3.6V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD56 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com