0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
MB85R4M2TFN-G-ASE1

MB85R4M2TFN-G-ASE1

  • 厂商:

    FUJITSU(富士通)

  • 封装:

    TSOP44

  • 描述:

    IC FRAM 4MBIT PARALLEL 44TSOP

  • 数据手册
  • 价格&库存
MB85R4M2TFN-G-ASE1 数据手册
FUJITSU SEMICONDUCTOR DATA SHEET DS501-00024-4v0-E Memory FRAM 4 M (256 K × 16) Bit MB85R4M2T  DESCRIPTIONS The MB85R4M2T is an FRAM (Ferroelectric Random Access Memory) chip consisting of 262,144 words × 16 bits of nonvolatile memory cells fabricated using ferroelectric process and silicon gate CMOS process technologies. The MB85R4M2T is able to retain data without using a back-up battery, as is needed for SRAM. The memory cells used in the MB85R4M2T can be used for 1013 read/write operations, which is a significant improvement over the number of read and write operations supported by Flash memory and E2PROM. The MB85R4M2T uses a pseudo-SRAM interface.  FEATURES • Bit configuration • LB and UB data byte control • Read/write endurance • Data retention • Operating power supply voltage • Low power operation : 262,144 words × 16 bits : Available Configuration of 524,288 words × 8 bits : 1013 times / 16 bits : 10 years ( + 85 °C), 95 years ( + 55 °C), over 200 years ( + 35 °C) : 1.8 V to 3.6 V : Operating power supply current 20 mA (Max) Standby current 150 μA (Max) Sleep current 20 μA (Max) • Operation ambient temperature range : − 40 °C to + 85 °C • Package : 44-pin plastic TSOP (FPT-44P-M34) RoHS compliant Copyright 2013-2016 FUJITSU SEMICONDUCTOR LIMITED 2016.10 MB85R4M2T  PIN ASSIGNMENTS (TOP VIEW) A4 A3 A2 A1 A0 / CE I/ O0 I/ O1 I/ O2 I/ O3 VDD VSS I/ O4 I/ O5 I/ O6 I/ O7 / WE A17 A16 A15 A14 A13 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 A5 A6 A7 / OE / UB / LB I/ O15 I/ O14 I/ O13 I/ O12 VSS VDD I/ O11 I/ O10 I/ O9 I/ O8 / ZZ A8 A9 A10 A11 A12 FPT- 44P- M34 2 DS501-00024-4v0-E MB85R4M2T  PIN DESCRIPTIONS Pin Number 1 to 5, 18 to 22, 23 to 27, 42 to 44 Pin Name A0 to A17 7 to 10, 13 to 16, 29 to 32, 35 to 38 6 I/O0 to I/O15 17 /WE 41 /OE 28 /ZZ 39, 40 /LB, /UB 11, 33 VDD 12, 34 VSS /CE Functional Description Address Input pins Select 262,144 words in FRAM memory array by 18 Address Input pins. When these address inputs are changed during /CE equals to “L” level, reading operation of data selected in the address after transition will start. Data Input/Output pins These are 16 bits bidirectional pins for reading and writing. Chip Enable Input pin In case the /CE equals to “L” level and /ZZ equals to “H” level, device is activated and enables to start memory access. In writing operation, input data from I/O pins are latched at the rising edge of /CE and written to FRAM memory array. Write Enable Input pin Writing operation starts at the falling edge of /WE. Input data from I/O pins are latched at the rising edge of /WE and written to FRAM memory array. Output Enable Input pin When the /OE is “L” level, valid data are output to data bus. When the /OE is “H” level, all I/O pins become high impedance (High-Z) state. Sleep Mode Input pin When the /ZZ becomes to “L” level, device transits to the Sleep Mode. During reading and writing operation, /ZZ pin shall be hold “H” level. Lower/Upper byte Control Input pins In case /LB or /UB equals to “L” level, it enables reading/writing operation of I/O0 to I/O7 or I/O8 to I/O15 respectively. In case /LB and /UB equal to “H” level, all I/O pins become High-Z state. Supply Voltage pins Connect all two pins to the power supply. Ground pins Connect all two pins to ground. Note: Please refer to the timing diagram for functional description of each pin. DS501-00024-4v0-E 3 MB85R4M2T  BLOCK DIAGRAM A0 to A17 Row Decoder Address /ZZ Control circuits /CE /WE FRAM Array 262,144×16 Column Decoder / Sense Amp. / Write Amp. /OE I/O0 to I/O15 /UB /LB  FUNCTIONAL TRUTH TABLE Operation Mode Sleep Standby Read Address Access Read Write(/CE Control)*1 Write(/WE Control)*1*2 Address Access Write*1*3 Pre-charge Note: H= “H” level, L= “L” level, /CE × H ↓ L ↓ L L ↑ /WE × × H H L ↓ ↓ × ↑= Rising edge, /OE × × L L × × × × A0 to A17 × × H or L ↑ or ↓ H or L H or L ↑ or ↓ × ↓= Falling edge, /ZZ L H H H H H H H ×= H, L, ↓ or ↑ *1: In writing cycle, input data is latched at early rising edge of /CE or /WE. *2: In writing sequence of /WE control, there exists time with data output of reading cycle at the falling edge of /CE. *3: In writing sequence of Address Access Write, there exists time with data output of reading cycle at the address transition. 4 DS501-00024-4v0-E MB85R4M2T  State Transition Diagram /CE=L, /ZZ=H Power Up RD/WR Operation Standby /CE=H,/ZZ=H /ZZ=H /ZZ=L Sleep  FUNCTIONAL TRUTH TABLE OF BYTE CONTROL Operation Mode Read(Without Output) Read(I/O8 to I/O15) Read(I/O0 to I/O7) Read(I/O0 to I/O15) Write(I/O8 to I/O15) Write(I/O0 to I/O7) Write(I/O0 to I/O15) /WE H H /OE H × H L ↑ × Note: H= “H” level, L= “L” level, Hi-Z= High Impedance /LB × H H L L H L L ↑= Rising edge, /UB × H L H L L H L I/O0 to I/O7 Hi-Z Hi-Z Hi-Z Output Output × Input Input ↓= Falling edge, I/O8 to I/O15 Hi-Z Hi-Z Output Hi-Z Output Input × Input ×= H, L, ↓ or ↑ In case the byte reading or writing are not selected, /LB and /UB pins shall be connected to GND pin. DS501-00024-4v0-E 5 MB85R4M2T  ABABSOLUTE MAXIMUM RATINGS Parameter Power Supply Voltage* Input Pin Voltage* Output Pin Voltage* Operation Ambient Temperature Storage Temperature Symbol VDD VIN VOUT TA Tstg Rating Min − 0.5 − 0.5 − 0.5 − 40 − 55 Max + 4.0 VDD + 0.5 ( ≤ 4.0) VDD + 0.5 ( ≤ 4.0) + 85 + 125 Unit V V V °C °C * : All voltages are referenced to VSS (ground 0 V). WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.  RECOMMENDED OPERATING CONDITIONS Parameter *1 Power Supply Voltage Operation Ambient Temperature*2 Symbol VDD TA Min 1.8 − 40 Value Typ 3.3 ― Max 3.6 + 85 Unit V °C *1: All voltages are referenced to VSS (ground 0 V). *2: Ambient temperature when only this device is working. Please consider it to be the almost same as the package surface temperature. WARNING: The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use semiconductor devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their representatives beforehand. 6 DS501-00024-4v0-E MB85R4M2T  ELECTRICAL CHARACTERISTICS 1. DC Characteristics Parameter Symbol Condition (within recommended operating conditions) Value Unit Min Typ Max Input Leakage Current Output Leakage Current Operating Power Supply Current*1 |ILI| VIN = 0V to VDD ― ― 5 μA |ILO| VOUT = 0V to VDD /CE = VIH or /OE = VIH ― ― 5 μA IDD /CE = 0.2 V, Iout = 0 mA ― 15 20 mA Standby Current ISB ― 30 150 μA Sleep Current IZZ ― 5 20 μA High Level Input Voltage Low Level Input Voltage High Level Output Voltage Low Level Output Voltage /ZZ ≥ VDD − 0.2V /CE, /WE, /OE ≥ VDD − 0.2V /LB, /UB ≥ VDD − 0.2V Others ≥ VDD − 0.2V or ≤ 0.2V /ZZ = VSS /CE, /WE, /OE ≥ VDD − 0.2V /LB, /UB ≥ VDD − 0.2V Others ≥ VDD − 0.2V or ≤ 0.2V VIH VDD = 1.8V to 3.6V VDD × 0.8 ― VDD + 0.3 V VIL VDD = 1.8V to 3.6V − 0.3 ― VDD × 0.17 V VDD × 0.8 ― ― VDD − 0.2 ― ― ― ― 0.4 ― ― 0.2 VOH1 VOH2 VOL1 VOL2 VDD = 2.7V to 3.6V IOH = − 1.0mA VDD = 1.8V to 2.7V IOH = − 100μA VDD = 2.7V to 3.6V IOL = 2.0mA VDD = 1.8V to 2.7V IOL = 150μA V V *1: During the measurement of IDD, all Address and I/O were taken to only change once per active cycle. Iout : output current DS501-00024-4v0-E 7 MB85R4M2T 2. AC Characteristics ・AC Test Conditions Power Supply Voltage Operation Ambient Temperature Input Voltage Amplitude Input Rising Time Input Falling Time Input Evaluation Level Output Evaluation Level Output Load Capacitance : 1.8 V to 3.6 V : − 40 °C to + 85 °C : 0 V / VDD : 3 ns : 3 ns : VDD/2 : VDD/2 : 30 pF (1) Read Cycle Parameter Read Cycle time /CE Access Time Address Access Time /OE Output Data Hold time Output Data Hold time /CE Active Time Pre-charge Time /LB, /UB Access Time Address Setup Time Address Hold Time /CE↑ to Address Transition time*1 /OE Access Time /CE Output Floating Time*1 /OE Output Floating Time /LB, /UB Output Floating Time Address Transition Time*1 Symbol tRC tCE tAA tOH tOAH tCA tPC tBA tAS tAH Value (VDD=1.8V to 2.7V) Min Max 185 ― ― 95 ― 185 0 ― 20 ― 95 ― 90 ― ― 35 0 ― 95 ― tCAH 0 tOE tHZ tOHZ tBHZ tAX ― ― ― ― ― ― 35 10 10 10 15 Value (VDD=2.7V to 3.6V) Min Max 150 ― ― 75 ― 150 0 ― 20 ― 75 ― 75 ― ― 20 0 ― 75 ― 0 ― ― ― ― ― Unit ns ns ns ns ns ns ns ns ns ns ― ns 20 10 10 10 15 ns ns ns ns ns *1: Same parameters with the Write cycle. 8 DS501-00024-4v0-E MB85R4M2T (2) Write Cycle Parameter Write Cycle Time /CE Active Time /CE↓ to /WE↑ Time Pre-charge Time Write Pulse Width Address Setup Time Address Hold Time /WE↓ to /CE↑ Time Address Transition to /WE↑ Time /WE↑ to Address Transition Time /LB, /UB Setup Time /LB, /UB Hold Time Data Setup Time Data Hold Time /WE Output Floating Time /WE Output Access Time*1 Write Setup Time*1 Write Hold Time*1 Symbol tWC tCA tCW tPC tWP tAS tAH tWLC tAWH tWHA tBS tBH tDS tDH tWZ tWX tWS tWH Value (VDD=1.8V to 2.7V) Min Max 185 ― 95 ― 95 ― 90 ― 20 ― 0 ― 95 ― 20 ― 185 ― 0 ― 2 ― 0 ― 10 ― 0 ― ― 10 10 ― 0 ― 0 ― Value (VDD=2.7V to 3.6V) Min Max 150 ― 75 ― 75 ― 75 ― 20 ― 0 ― 75 ― 20 ― 150 ― 0 ― 2 ― 0 ― 10 ― 0 ― ― 10 10 ― 0 ― 0 ― Unit ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns *1: Writing operation applies “Write Cycle Timing 1” or “Write Cycle Timing 2” by the relation of /CE and /WE timing. The values of tWX, tWS and tWH are defined by these operations. The conditions of tWS and tWH are not checked at shipping test. (3) Power ON/OFF Sequence and Sleep Mode Cycle Parameter /CE level hold time for Power ON /CE level hold time for Power OFF Power supply rising time Power supply falling time /ZZ active time Sleep mode enable time /CE level hold time for Sleep mode release DS501-00024-4v0-E Symbol tPU tPD tVR tVF tZZL tZZEN tZZEX Value Min 450 85 50 100 1 ― 450 Max ― ― ― ― ― 0 ― Unit μs ns μs/V μs/V μs μs μs 9 MB85R4M2T 3. Pin Capacitance Parameter Symbol Input Capacitance Input/Output Capacitance (I/O pin) /ZZ Pin Input Capacitance CIN CI/O CZZ Condition VDD = 3.3 V, f = 1 MHz, TA = + 25 °C Value Min ― ― ― Typ ― ― ― Max 6 8 8 Unit pF pF pF  AC Test Load Circuit VDD 1.2k Output 30pF 10 0.95k DS501-00024-4v0-E MB85R4M2T  TIMING DIAGRAMS 1. Read Cycle Timing 1 (/CE Control) tRC t AH tCAH Val id Add ress A0 to A17 tCA t AS tOH / CE tPC tHZ tCE tOE / OE tOHZ tBA / LB,/ UB tBHZ I/ O0 to I/ O15 Val id Out put Da ta XXX : H or L 2. Read Cycle Timing 2 (Address Access) t PC t AS A0 to A17 t AX t AH t RC Valid Address t AX Valid Address Valid Address t CE tCAH t RC t AA t AA tOH / CE t HZ t OE / OE tOH Z t BA / LB,/ UB t OAH t BHZ t OAH I/ O0 to I/ O15 Valid Out put Data Valid Out put Data Valid Out put Data XXX : H or L DS501-00024-4v0-E 11 MB85R4M2T 3. Write Cycle Timing 1 (/WE Control) tWC t AH tCA A0 to A17 Valid Address tCAH tCW t AS tWLC t AS tPC /CE tWZ tWHA /WE tBS tWP tBH tWX /LB, /UB tDS tDH tHZ I/O0 to I/O15 Invalid Output Data Valid Input Data Invalid Output Data XXX : H or L * : In case the /OE is “L” level, invalid data are output to data bus. * : In case the /OE is “L” level, any bus conflict of input and output data shall not occur. 4. Write Cycle Timing 2 (/CE Control) tWC t AH t AS A0 to A17 t AS Val id Add ress tCAH tCA tPC / CE tWH tWS / WE tBH tBS / LB, / UB tDS tDH I/ O0 to I/ O15 Valid Input Data XXX : H or L 12 DS501-00024-4v0-E MB85R4M2T 5. Write Cycle Timing 3 (Address Access and /WE Control) t PC t AS t AX t AH Valid Address A0 to A17 t AX t WC Valid Address tWC t CAH Valid Address t HZ / CE t WP t WHA t WHA t AWH tWHA t AWH / WE t BH t BS / LB,/ UB t WX t DS t DH t WZ t WP t WZ t WX tWP t DS t DH t WZ t DS t WX t DH I/ O0 to I/ O15 Valid Input Data Valid Out put Data Valid Input Data Invalid Out put Data Invalid Out put Data Invalid Out put Data Invalid Out put Data XXX : H or L * : In case t he / OE is ・L・level, invalid dat a are out put to data bus . * : In case t he / OE is ・L・level, any bus c onf lict of inpu t and out put data shal l not occur. 6. Sleep Mode Timing tPC t ZZEX t ZZEN / CE / WE t ZZL / ZZ I/ O0 to I/ O15 DS501-00024-4v0-E 13 MB85R4M2T  POWER ON/OFF SEQUENCE tPD tVF tVR tPU VDD VDD VDD(Min) VIH(Min) VIH(Min) 1.0V VIL(Max) VIL(Max) VSS VSS /CE /CE >VDD×0.8* /CE Don’t Care /CE>VDD×0.8* * : /CE (Max) < VDD+0.3V  FRAM CHARACTERISTICS Item Read/Write Endurance*1 Data Retention*2 Min 1013 10 95 ≥ 200 Max ― ― ― ― Unit Times/16 bits Years Parameter Operation Ambient Temperature TA = + 85 °C Operation Ambient Temperature TA = + 85 °C Operation Ambient Temperature TA = + 55 °C Operation Ambient Temperature TA = + 35 °C *1: Total number of reading and writing defines the minimum value of endurance, as an FRAM memory operates with destructive readout mechanism. *2: Minimum values define retention time of the first reading/writing data right after shipment, and these values are calculated by qualification results.  NOTE ON USE • We recommend programming of the device after reflow. Data written before reflow cannot be guaranteed. 14 DS501-00024-4v0-E MB85R4M2T  ESD AND LATCH-UP Test ESD HBM (Human Body Model) JESD22-A114 compliant ESD MM (Machine Model) JESD22-A115 compliant ESD CDM (Charged Device Model) JESD22-C101 compliant Latch-Up (I-test) JESD78 compliant Latch-Up (Vsupply overvoltage test) JESD78 compliant Latch-Up (Current Method) Proprietary method Latch-Up (C-V Method) Proprietary method DUT Value ≥ |2000 V| ≥ |200 V| ― MB85R4M2TFN-G-ASE1 ― ― ― ≥ |200 V| ・Current method of Latch-Up Resistance Test Note: The voltage VIN is increased gradually and the current IIN of 300 mA at maximum shall flow. Confirm the latch up does not occur under IIN =±300 mA. In case the specific requirement is specified for I/O and IIN cannot be 300 mA, the voltage shall be increased to the level that meets the specific requirement. DS501-00024-4v0-E 15 MB85R4M2T ・C-V method of Latch-Up Resistance Test Note: Charge voltage alternately switching 1 and 2 approximately 2 sec intervals. This switching process is considered as one cycle. Repeat this process 5 times. However, if the latch-up condition occurs before completing 5times, this test must be stopped immediately.  REFLOW CONDITIONS AND FLOOR LIFE [ JEDEC MSL ] : Moisture Sensitivity Level 3 (ISP/JEDEC J-STD-020D)  CURRENT STATUS ON CONTAINED RESTRICTED SUBSTANCES This product complies with the regulations of REACH Regulations, EU RoHS Directive and China RoHS. 16 DS501-00024-4v0-E MB85R4M2T  ORDERING INFORMATION Part Number MB85R4M2TFN-G-ASE1 Package Shipping form Minimum shipping quantity 44-pin plastic TSOP (FPT-44P-M34) Tray ―* *: Please contact our sales office about minimum shipping quantity. DS501-00024-4v0-E 17 MB85R4M2T  PACKAGE DIMENSIONS Lead pitch 0.8mm Package width × package length 10.16 × 18.41mm Lead shape Gullwing Sealing method Plastic mold Mounting height 1.2mm Weight 0.46 g 44-pin plastic TSOP (FPT-44P-M34) 44-pin plastic TSOP (FPT-44P-M34) 11.76±0.20 * (10.76) 10.16±0.10 [23] 10.16±0.10 [44] (0.50) Note 1) # : Resin protrusion.(Each side:+0.15 Max). Note 2) * : These dimensions do not include resin protrusion. Note3)Pins width and pins thickness include plating thickness. Note4)Pins width do not include tie bar cutting remainder. LEAD No. [1] (0.50) INDEX [22] +0.075 (0.29) 1.20 MAX 18.41±0.10 0.45~0.75 0.125 –0.035 # 0.80TYP 0.30+0.10 –0.05 2013 FUJITSU SEMICONDUCTOR LIMITED F44025S-c-2-3 18 0.35+0.10 –0.05 0.05 MIN 0.10 MAX (0.805) 0.25TYP 0~8° Dimensions in mm. Note : The values in parentheses are reference values. DS501-00024-4v0-E MB85R4M2T  MARKING [MB85R4M2TFN-G-ASE1] [FPT-44P-M34] DS501-00024-4v0-E 19 MB85R4M2T  MAJOR CHANGES IN THIS EDITION A change on a page is indicated by a vertical line drawn on the left side of that page. Page 1 14 20 Section  FEATURES  FRAM CHARACTERISTICS Change Results Added Data retention under 85 °C. Added Data retention under 85 °C. DS501-00024-4v0-E MB85R4M2T DS501-00024-4v0-E 21 MB85R4M2T 22 DS501-00024-4v0-E MB85R4M2T DS501-00024-4v0-E 23 MB85R4M2T FUJITSU SEMICONDUCTOR LIMITED Shin-Yokohama Chuo Building, 2-100-45 Shin-Yokohama, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan http://jp.fujitsu.com/fsl/en/ All Rights Reserved. FUJITSU SEMICONDUCTOR LIMITED, its subsidiaries and affiliates (collectively, "FUJITSU SEMICONDUCTOR") reserves the right to make changes to the information contained in this document without notice. Please contact your FUJITSU SEMICONDUCTOR sales representatives before order of FUJITSU SEMICONDUCTOR device. Information contained in this document, such as descriptions of function and application circuit examples is presented solely for reference to examples of operations and uses of FUJITSU SEMICONDUCTOR device. FUJITSU SEMICONDUCTOR disclaims any and all warranties of any kind, whether express or implied, related to such information, including, without limitation, quality, accuracy, performance, proper operation of the device or non-infringement. If you develop equipment or product incorporating the FUJITSU SEMICONDUCTOR device based on such information, you must assume any responsibility or liability arising out of or in connection with such information or any use thereof. FUJITSU SEMICONDUCTOR assumes no responsibility or liability for any damages whatsoever arising out of or in connection with such information or any use thereof. Nothing contained in this document shall be construed as granting or conferring any right under any patents, copyrights, or any other intellectual property rights of FUJITSU SEMICONDUCTOR or any third party by license or otherwise, express or implied. FUJITSU SEMICONDUCTOR assumes no responsibility or liability for any infringement of any intellectual property rights or other rights of third parties resulting from or in connection with the information contained herein or use thereof. The products described in this document are designed, developed and manufactured as contemplated for general use including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high levels of safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (including, without limitation, use in nuclear facility, aircraft flight control system, air traffic control system, mass transport control system, medical life support system and military application), or (2) for use requiring extremely high level of reliability (including, without limitation, submersible repeater and artificial satellite). FUJITSU SEMICONDUCTOR shall not be liable for you and/or any third party for any claims or damages arising out of or in connection with above-mentioned uses of the products. Any semiconductor devices fail or malfunction with some probability. You are responsible for providing adequate designs and safeguards against injury, damage or loss from such failures or malfunctions, by incorporating safety design measures into your facility, equipments and products such as redundancy, fire protection, and prevention of overcurrent levels and other abnormal operating conditions. The products and technical information described in this document are subject to the Foreign Exchange and Foreign Trade Control Law of Japan, and may be subject to export or import laws or regulations in U.S. or other countries. You are responsible for ensuring compliance with such laws and regulations relating to export or re-export of the products and technical information described herein. All company names, brand names and trademarks herein are property of their respective owners. Edited: System Memory Business Division
MB85R4M2TFN-G-ASE1 价格&库存

很抱歉,暂时无法提供与“MB85R4M2TFN-G-ASE1”相匹配的价格&库存,您可以联系我们找货

免费人工找货