319FJ043M16

319-043 EMI/RFI Shield Sock Shrink Boot Adapter with Optional Shrink Boot Standard Profile - Direct Coupling 319 F J 043 M 16 06-6-4 T 319 CONNECTOR DESIGNATORS * * Conn. Desig. B See Note 6 Product Series Connector Designator Shrink Boot (Table IV Omit for None) Length: S only (1/2 inch increments: e.g. 4 = 2 inches) Shield Length (1 inch increments: Minimum 6 inches) Cable Entry (Table V) Shell Size (Table I) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) A-B -C-D-E-F Angle and Profile G-H-J-K-L-S J ==90° H 45° S = Straight Basic Part No. Finish (Table II) DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) Length * A Thread (Table I) O-Ring B (Table I) STYLE 2 (STRAIGHT See Note 7) A Thread (Table I) Cable Entry E J (Table III) (Table IV) F (Table IV) J (Table III) G (Table IV) B (Table I) B (Table I) H (Table IV) .140/.130 (3.6/3.3) Typ. Cable Entry Shield Length (Approx.) Single Layer Shield (Tinned Copper) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 319 - Page 8 with Optional Shrink Boot Standard Profile - Direct Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: DIMENSIONS Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 E Max .639 (16.2) .664 (16.9) .688 (17.5) .688 (17.5) .705 (17.9) .705 (17.9) .732 (18.6) .732 (18.6) .748 (19.0) .773 (19.6) .773 (19.6) .800 (20.3) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) 1.184 (30.1) .823 (20.9) 1.041 (26.4) 1.092 (27.7) F Max .952 (24.2) .982 (24.9) 1.002 (25.5) 1.002 (25.5) 1.032 (26.2) 1.032 (26.2) 1.052 (26.7) 1.052 (26.7) 1.062 (27.0) 1.082 (27.5) 1.082 (27.5) 1.122 (28.5) 1.122 (28.5) 1.152 (29.3) 1.322 (33.6) 1.362 (34.6) 1.412 (35.9) 1.452 (36.9) 1.152 (29.3) 1.322 (33.6) 1.362 (34.6) G Max .750 (19.1) .810 (20.6) .870 (22.1) .870 (22.1) .920 (23.4) .920 (23.4) .980 (24.9) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.080 (27.4) 1.140 (29.0) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) 1.830 (46.5) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) H Max 1.062 (27.0) 1.122 (28.5) 1.182 (30.0) 1.182 (30.0) 1.252 (31.8) 1.252 (31.8) 1.312 (33.3) 1.312 (33.3) 1.332 (33.8) 1.392 (35.4) 1.392 (35.4) 1.472 (37.4) 1.472 (37.4) 1.542 (39.2) 1.782 (45.3) 1.872 (47.5) 1.982 (50.3) 2.092 (53.1) 1.542 (39.2) 1.780 (45.2) 1.872 (47.5) TABLE IV: CABLE ENTRY SHRINK BOOT Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Cable Entry .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 1.125 (28.6) 1.375 (34.9) 1.625 (41.3) 1.062 (27.0) 1.188 (30.2) 1.875 (47.6) Shrink Boot n/a n/a 770-001S103 770-001S103 770-001S103 770-001S104 770-001S104 770-001S104 770-001S105 770-001S105 770-001S105 770-001S106 770-001S106 770-001S106 770-001S107 770-001S108 n/a n/a n/a n/a n/a n/a n/a n/a GLENAIR SYMBOL B M NF TABLE II: STANDARD FINISHES FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options 1. Cable Entry or range is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. See Shrink Boot Reference Information (page 40). 3. Metric dimensions (mm) are indicated in parentheses. 4. O-Ring not supplied with Connector Designator A. 5. Consult factory for shorter lengths on straight backshells. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. 7. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only.) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 319 - Page 9 319 319-043 EMI/RFI Shield Sock Shrink Boot Adapter