G432

ISSUED DATE :2004/02/23 REVISED DATE :2004/10/21C G432 Description Adjustable Shunt Regulator The G432 series are three-terminal adjustable precision shunt regulators with guaranteed stable temperature over the applicable extended commercial temperature range. The output voltage may be set at any level greater than 1.24V (VREF) up to 20V merely by selecting two external resistors that act as a voltage divider network. These devices have a typical output impedance of 0.2 . Active output circuitry provides very sharp turn-on characteristics, making these devices excellent improved replacements for Zener diodes in many applications. The precise +/- 2% reference voltage tolerance of G432 make it possible in many applications to avoid the use of a variable resistor, consequently saving cost and eliminating drift and reliability problems associated with it. Features *Precision reference voltage A Rank: 1.24V D 0.5% , B Rank: 1.24V D , 1% C Rank: 1.24V D 2.0% *Sink current capability: 200 mA. *Minimum cathode current for regulation: 150 A. *Equivalent full-range temp coefficient: 30 ppm/ : . *Fast turn-on Response. *Low dynamic output impedance: 0.2 . *Programmable output voltage to 20V. *Low output noise. Package Dimensions REF. A B C D E F Millimeter Min. Max. 2.70 3.10 2.40 2.80 1.40 1.60 0.35 0.50 0 0.10 0.45 0.55 REF. G H K J L M Millimeter Min. Max. 1.90 REF. 1.00 1.30 0.10 0.20 0.40 0.85 1.15 0C 10 C Typical Application Circuit Block Diagram Symbol G432 1/5 ISSUED DATE :2004/02/23 REVISED DATE :2004/10/21C Absolute Maximum Ratings at Ta = 25 : Parameter Junction Temperature Storage Temperature Cathode Voltage Continuous Cathode Current Reference Input Current Range Total Power Dissipation Symbol Tj Tstg VKA IKA IREF PD Ratings +150 -65 ~ +150 20 -10~+250 -0.05~+10 225 V mA mA mW Unit Electrical Characteristics(Ta = 25 : ,unless otherwise specified.) Parameter Reference Voltage G432C G432B G432A Deviation of reference Input Voltage Over temperature(note1) Ratio of Change in Reference Input Voltage to the Change in Cathode Voltage Reference Input Current Deviation of reference Input Current Over Temperature Range Minimum Cathode Current for Regulation Off-State Cathode Current Dynamic Output Impedance (note2) VREF/ T VREF Symbol Min 1.215 1.228 1.234 Typ. 1.24 1.24 1.24 3.0 Max. 1.265 1.252 1.246 20 mV V Unit Test Conditions VKA= VREF , IK=10mA (Fig.1) VKA= VREF , IK=10mA Ta=Full range (Fig.1) IK=10mA (Fig.2) VKA=20V~VREF (Fig.2) VREF/ VKA IREF Ø IREF IKA(min) IKA(off) ZkA ‡ - -1.4 1.4 0.4 0.15 0.1 0.2 -2.0 3.5 1.2 0.3 1.0 0.5 mV/V uA uA mA uA IK=10mA,R1=10K ,R2= IK=10mA,R1=10K ,R2= Ta=Full range(Fig.2) VKA=VREF(Fig.1) VKA=20V,VREF=0 (Fig.3) VKA=VREF, IK=1 ~100mA F 1.0KHz(Fig.1) Note1. Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference over the full temperature range. The average temperature coefficient of the reference input voltage Ø VREF is defined as: W here: T2 – T1 = full temperature change. Ø VREF can be positive or negative depending on whether the slope is positive or negative. Note2. The dynamic output impedance, RZ, is defined as: G432 2/5 ISSUED DATE :2004/02/23 REVISED DATE :2004/10/21C W hen the device is programmed with two external resistors R1 and R2 (see figure 2.), the dynamic output impedance of the overall circuit, is defined as: Test Circuits Typical Performance Characteristics G432 3/5 ISSUED DATE :2004/02/23 REVISED DATE :2004/10/21C G432 4/5 ISSUED DATE :2004/02/23 REVISED DATE :2004/10/21C Application Examples Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 G432 5/5