C11440

Scientific CMOS Board-Level Camera Preliminary C11440-50B Sol M OEtion u The core of the C11440-50B camera is the new scientific image sensor FL-280, an advanced CMOS detector that simultaneously achieves high resolution, fast readout speeds and low noise. With its small size, board-level design and simple, low-cost integration using IEEE1394b with bus power, the C11440-50B is the ideal camera for OEM scientific imaging. A p p lic a t io n s High speed Ca2+ imaging Ratio imaging FRET TIRF microscopy Live cells expressing GFP Time lapse fluorescence imaging Low noise High resolution High speed readout High dynamic range 3 electrons (r.m.s.) 2.8 megapixel 45 frames/second 4500: 1 Micromorphological observation Real-time confocal microscopy Fluorescence in situ hybridization (FISH) Failure analysis Semiconductor inspection X-ray scintillator readout Featur e s High image quality (no fixed pattern noise) Comparison of noise performance (no image correction) ● Conventional CMOS camera ● C11440-50B Output count Linearity Linearity characteristics 4000 3500 3000 2500 2000 1500 1000 500 0 0 0.2 0.4 0.6 0.8 1.0 ▲ Exposure time: 15 ms ▲ Exposure time: 50 ms Incoming photons (relative) About twice the resolution of CCD (2/3 inch, 1.3 megapixel) Comparison of resolution ● Bright field observation (Sample: Test Plate) Wider field of view than CCD (2/3 inch, 1.3 megapixel) Comparison of field of view ● Bright field observation (Sample: Test Plate) ▲ CCD (2/3 inch, 1.3 megapixel) ▲ CCD (2/3 inch, 1.3 megapixel) (without relay lens) ▲Entire image ▲ C11440-50B ▲ C11440-50B (0.5x relay lens used) Functions Analog gain Comparison ● Analog gain 1x ● Analog gain 8x External trigger functions and timing output functions ● Global exposure trigger ● Synchronous readout trigger ● Start trigger ● Trigger delay function ● Programmable timing output ● Global exposure timing output ● Trigger ready output ▲ These graphs show the intensity profile of the white line in each image. Speci fications Type number Camera type Imaging device Effective number of pixels Cell size Effective area Readout speed Binning* Readout noise (r.m.s.) typ. Full well capacity typ. Analog gain Dynamic range typ.** A/D converter Exposure time External trigger mode C11440-50B Board type Scientific CMOS Image Sensor FL-280 1920 (H) × 1440 (V) 3.63 μm (H) × 3.63 μm (V) 6.97 mm (H) × 5.23 mm (V) 45.4 frames/s to 1273 frames/s 2× 2 ● Spectral response 70 Quantum efficiency (%) 60 50 40 30 20 10 0 300 400 500 600 700 800 900 1000 1100 1200 3 electrons (gain 8x) 18000 electrons 1× to 8× (256 steps) 4500: 1 (gain 1×) 12 bit or 8 bit 20 μs to 1 s (at internal trigger/external trigger) Edge trigger, Level trigger Global exposure trigger Synchronous readout trigger Start trigger Trigger delay function 0 μs to 1 s (10 μs step) Trigger output Programmable timing output Global exposure timing output Trigger ready output Lens mount C-mount Interface IEEE1394b × 2 bus Connector 9-pin IEEE1394b connecter (Industrial type) × 2 Power requirements IEEE1394b bus power / DC 8 V to 30 V Power consumption Lower than 3 W Ambient storage temperature - 10 ˚C to + 50 ˚C Ambient operating temperature 0 ˚C to + 40 ˚C Ambient storage /operating humidity 70 % max. (no condensation) *Digital binning processing in the camera **Calculated from the ratio of the full well capacity and the readout noise. Wavelength (nm) Dime n s io n a l o u t lin e s ■ C11440-50B (Approx. 80 g) 4-φ3.5 85±1 77±0.3 18.5±0.5 t1.6 U n i t: mm 85±1 77±0.3 1-32UN (C-Mount) S y s t e m c o n f ig u ra t io n 2 bus C-mount lens C11440-50B 1394b(BusPower) 1394b(BusPower) Standard Option Computer Readout mode / speed (Unit: frame/s) Sub-array 1920 (H) × 1920 (H) × 1920 (H) × 1920 (H) × 1920 (H) × 1920 (H) × 1440 (V) 1080 (V) 600 (V) 240 (V) 80 (V) 8 (V) 1 bus 8 bit 22.7 30 52.3 118 270 1273 12 bit 15 19.8 34.5 78.1 178 840 8 bit 45.4 60 104 236 540 1273 12 bit 30 39.6 69 156 356 840 34±0.5 Software ★ Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers. ● ● Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. . Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications and external appearance are subject to change without notice. . © 2010 Hamamatsu Photonics K.K. Homepage Address http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Systems Division 812 Joko-cho, Higashi-ku, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp U.S.A. and Canada: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1)908-231-0852, E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658, E-mail: info@hamamatsu.de , France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10, E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire, AL7 1BW, U.K., Telephone: (44) 1707-294888, Fax: (44) 1707-325777, E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01, E-mail: info@hamamatsu.se Cat. No. SCAS0076E01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int.6-20020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it OCT/2010 HPK Created in Japan