5.0SMDJ22CA-T7

TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W RoHS Pb e3 Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features & Benefits ■ Excellent clamping capability ■ 5000W peak pulse power capability at 10/1000μs ■ Low incremental surge waveform, repetition rate (duty resistance cycles):0.01% ■ Typical IR less than 5μA when ■ SMD low profile surface VBR min>22V mount package minimizing ■ High temperature to reflow PCB footprint soldering guaranteed: ■ Typical failure mode is short 260°C/40sec from over-specified voltage or ■ VBR @ TJ= VBR@25°C x (1+αT current x (TJ - 25))(αT:Temperature ■ Whisker test is conducted Coefficient,) based on JEDEC JESD201A ■ UL Recognized compound per its table 4a and 4c meeting flammability rating V-0 ■ IEC 61000-4-2 ESD 30kV(Air), ■ Meet MSL level1, per 30kV (Contact) J-STD-020, LF maximun peak ■ ESD protection of data lines in of 260°C accordance with IEC 61000■ Matte tin lead–free plated 4-2 ■ Halogen free and RoHS ■ EFT protection of data lines in compliant accordance with IEC 61000- Bi-directional Additional Information Resources Accessories Samples Agency Approvals Agency 4-4 Agency File Number ■ Built-in strain relief E230531 ■ Glass passivated chip junction ■ Fast response time: typically less than 1.0ps from 0V to BV min Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Peak Pulse Power Dissipation at TL=25OC by 10/1000µs Waveform (Fig.2)(Note 1), (Note 2) Power Dissipation on Infinite Heat Sink at TL=50OC Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only Operating Temperature Range Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient Symbol Value Unit PPPM 5000 W PD 6.5 W IFSM 300 A VF 5.0 V TJ -65 to 150 °C TSTG -65 to 175 °C RƟJL 15 °C/W RƟJA 75 °C/W ■ Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) ■ Recognized to UL 497B as an Isolated Loop Circuit Protector Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Functional Diagram Bi-directional Cathode Anode Uni-directional Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle = 4 per minute maximum. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.07/22/21 TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Electrical Characteristics (TA=25°C unless otherwise noted) Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Maximun Maximum Maximum Maximum Maximum Agency Clamping Maximum Peak Clamping Peak Reverse Voltage Pulse Temperature Approval Pulse Voltage Leakage VC@IPP Current IPP VC@IPP Current Coefficient IT IR@VR of VBR (%/C) (10/1000μs) (10/1000μs) (8/20µs) IPP(8/20μs) (µA) (mA) (V) (V) (A) (A) Test Part Number (Uni) Part Number (Bi) Uni Bi 5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.3 14.7 10 19.9 252.0 25.7 1890.0 800 0.075 5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.4 15.9 10 21.5 233.0 27.8 1747.5 500 0.076 X 5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.6 17.2 10 23.2 216.0 30.0 1620.0 200 0.08 X 5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.7 18.5 1 24.4 205.0 31.5 1537.5 100 0.083 X 5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17.8 19.7 1 26.0 193.0 33.6 1447.5 50 0.084 X X Marking Min. Max. Current X 5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 17.0 18.9 20.9 1 27.6 181.0 35.7 1357.5 20 0.085 5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.0 22.1 1 29.2 172.0 37.7 1290.0 10 0.088 X 5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.2 24.5 1 32.4 155.0 41.9 850.0 5 0.091 X 5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.4 26.9 1 35.5 141.0 45.9 1057.5 5 0.092 X 5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.7 29.5 1 38.9 129.0 50.3 967.5 5 0.092 X 5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.9 31.9 1 42.1 119.0 54.4 892.5 5 0.093 X 5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.1 34.4 1 45.4 110.0 58.7 825.0 5 0.094 X 5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.3 36.8 1 48.4 103.0 62.5 772.5 5 0.096 X 5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.7 40.6 1 53.3 93.9 68.9 704.3 5 0.097 X 5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.0 44.2 1 58.1 86.1 75.1 645.8 5 0.098 X 5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.4 49.1 1 64.5 77.6 83.3 582.0 5 0.099 X 5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.8 52.8 1 69.4 72.1 89.7 540.8 5 0.1 X 5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.0 55.3 1 72.7 68.8 93.9 516.0 5 0.101 X 5.0SMDJ48A 5.0SMDJ48CA 5PFX 5BFX 48.0 53.3 58.9 1 77.4 64.7 100.0 485.3 5 0.101 X 5.0SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ 51.0 56.7 62.7 1 82.4 60.7 106.5 455.3 5 0.101 X 5.0SMDJ54A 5.0SMDJ54CA 5PGE 5BGE 54.0 60.0 66.3 1 87.1 57.5 112.5 431.3 5 0.102 X 5.0SMDJ58A 5.0SMDJ58CA 5PGG 5BGG 58.0 64.4 71.2 1 93.6 53.5 120.9 401.3 5 0.103 X 5.0SMDJ60A 5.0SMDJ60CA 5PGK 60.0 66.7 73.7 1 96.8 51.7 125.1 387.8 5 0.103 X 5BGK 5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM 64.0 71.1 78.6 1 103.0 48.6 133.1 364.5 5 0.104 X 5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGB 70.0 77.8 86.0 1 113.0 44.3 146.0 332.3 5 0.105 X 5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR 75.0 83.3 92.1 1 121.0 41.4 156.3 310.5 5 0.106 X 5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT 78.0 86.7 95.8 1 126.0 39.7 162.8 297.8 5 0.106 X 5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV 85.0 94.4 104.0 1 137.0 36.5 177.0 273.8 5 0.106 X 5.0SMDJ90A 5.0SMDJ90CA X 5PGX 5BGX 90.0 100.0 111.0 1 146.0 34.3 188.6 257.3 5 0.107 5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ 100.0 111.0 123.0 1 162.0 30.9 209.3 231.8 5 0.107 X 5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE 110.0 122.0 135.0 1 177.0 28.3 228.7 212.3 5 0.107 X 5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG 120.0 133.0 147.0 1 193.0 26.0 249.4 195.0 5 0.108 X 5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK 130.0 144.0 159.0 1 209.0 24.0 270.0 180.0 5 0.108 X 5.0SMDJ140A 5.0SMDJ140CA 5PHL 5BHL 140.0 156.0 172.0 1 226.1 22.2 292.1 166.5 5 0.108 X 5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM 150.0 167.0 185.0 1 243.0 20.6 314.0 154.5 5 0.108 X 5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHB 160.0 178.0 197.0 1 259.0 19.3 334.6 144.8 5 0.108 X 5.0SMDJ170A 5.0SMDJ170CA 5PHR 5BHR 170.0 189.0 209.0 1 275.0 18.2 355.3 136.5 5 0.108 X For bidirectional type having VR of 20 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred. 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.07/22/21 TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W I-V Curve Characteristics Uni-directional Bi-directional Ipp Vc VBR VR IR V F IT Vc VBR VR V IT IR IR IT V Ipp Ipp PPPM VR VBR VC IR VF VR VBR Vc Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1: TVS Transients Clamping Waveform Figure 2: Peak Pulse Power Rating 1000 Voltage Transients PPPM-Peak Pulse Power (KW) TJ initial = Tamb Voltage or Current Voltage Across TVS Current Through TVS 100 5kW at 10/1000µs, 25°C 10 1 0.001 0.01 0.1 1 10 td-Pulse Width (ms) Time 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.07/22/21 TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) Figure 3: Peak Pulse Power Derating Curve Figure 4: Pulse Waveform 150 80 60 40 20 0 tr=10µsec IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) Half Value IPPM IPPM ( ) 2 50 0 175 Transient Thermal Impedance (°C/W) l V=0V Cj(pF) 1000 l V=VR 100 10 100 1.0 0 3.0 4.0 10 1 0.1 1000 0.01 0.1 1 10 100 1000 TP - Pulse Duration (s) VBR - Reverse Breakdown Voltage(V) Figure 7: Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Figure 8: Peak Forward Voltage Drop vs Peak Forward Current (Typical Values) 450 100 IF- Peak Forward Current(A) 400 IFSM - Peak Forward Surve Current(A) 2.0 100 0.01 0.001 1 10 td Figure 6: Typical Transient Thermal Impedance 0 Uni/Bi-direc 10/1000µsec. Waveform as defined by R.E.A t-Time (ms) 100000 Bi-direc Peak Value IPPM 100 Figure 5: Typical Junction Capacitance 10000 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 350 300 250 200 150 100 5.0SMDJ20A 10 1 0.1 50 0.01 0 1 10 100 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 VF-Peak Forward Voltage(V) Number of Cycles at 60 Hz 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.07/22/21 TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Soldering Parameters Lead–free assembly Reflow Condition Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Ramp-up Average ramp up rate (Liquidus Temp (TA) to peak 3°C/second max Temperature (T) Reflow TL 3°C/second max TS(max) to TA - Ramp-up Rate - Temperature (TL) (Liquidus) 217°C - Time (min to max) (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Case Polarity Terminal tL Critical Zone TL to TP Ts(max) Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) Physical Specifications Weight tp TP Environmental Specifications 0.007 ounce, 0.21 grams High Temp. Storage JESD22-A103 JEDEC DO214AB. Molded component over glass passivated junction Color band denotes positive end (cathode) except Bidirectional. Matte Tin-plated leads, Solderable per JESD22-B102 HTRB JESD22-A108 Temperature Cycling JESD22-A104 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22-A111 Dimensions Dimensions DO-214AB (SMC J-Bend) A B C D E F G H I J K L Cathode Band (for uni-directional products only) C A B H D J E F G Dimensions in inches and (millimeters) K L Inches Millimeters Min Max Min Max 0.114 0.260 0.220 0.079 0.030 0.305 0.006 0.129 0.094 0.094 0.126 0.280 0.245 0.103 0.060 0.008 0.320 0.012 0.165 - 2.900 6.600 5.590 2.060 0.760 7.750 0.152 3.300 2.400 2.400 3.200 7.110 6.220 2.620 1.520 0.203 8.130 0.305 4.200 - I Solder Pads (all dimensions in mm) 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.07/22/21 TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Part Numbering System 5.0SMDJ Part Marking System XXX C A Cathode Band F (for uni-directional products only) 5% VBR Voltage Tolerance XXX Bi-Directional YMXXX VR Voltage Series Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Options Part number Component Package Quantity Packaging Option Packaging Specification 5.0SMDJxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481 5.0SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 (8.0) Optional 7” 7.0 (187) 13” 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) 0.059 DIA (1.5) Cover tape Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. 6 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.07/22/21