A3151U2Y2NZNQ

A Series 4 & 5 Tumbler 1-4 Pole Switchlocks Features/Benefits • Multi-pole and multi-position • Shorting and non-shorting contacts available • Low level and power capability • PCB mounting Typical Applications • Security alarm systems • Medical equipment • Computer servers Models Available Specifications Materials CONTACT RATING: Q contact material: Switch-2.5 AMPS @ 125 V AC; 350 mA @ 125 V DC (UL/CSA). Carry-5 AMPS continuous. See page L-33 for additional ratings. ELECTRICAL LIFE: 15,000 make-and-break cycles at full load up to 300,000 detent operations. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. INDEXING: 30º: 2-4 positions, 45º or 90º: 2-3 positions. STATIC RESISTANCE: Anti-static models exceed 20 KV DC static resistance @ sea level, lock body to terminals. LOCK: Zinc alloy with stainless steel facing. KEYS: Two nickel plated brass keys with code number. SWITCH HOUSING: Glass filled 6/6 nylon (UL 94V-0). MOVABLE CONTACT: Q contact material: Coin silver, silver plated. See page L-38 for additional contact materials. STATIONARY CONTACTS & TERMINALS: Q contact material: Brass, silver plated. See page L-33 for additional contact materials. MOUNTING NUT: Zinc alloy. DRESS NUT: Brass, nickel plated. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–30 through L–33. For additional options not shown in catalog, consult Customer Service Center. Keying 2 Two nickel plated brass keys Lock Type A 4 Tumbler lock G 5 Tumbler lock with anti-static switch Y 4 Tumbler lock with anti-static switch Lock Finish 2 Stainless steel facing 1 Nickel plated with removable dress nut 8 Gloss black facing L Switchlock Switch and lock Function A21613 DP, 30°, keypull pos. 1 A11413 SP, 90°, keypull pos. 1 A31413 3P, 90º, keypull pos. 1 A3141U 3P, 90°, keypull pos. 1 & 2 A11513 SP, 45°, keypull pos. 1 A31513 3P, 45°, keypull pos. 1 A3151U 3P, 45°, keypull pos. 1 & 3 A21582 DP, 45º, keypull pos. 1 A11613 SP, 30°, keypull p05. 1 A1161U SP, 30°, keypull pos. 1 & 4 A12112 SP, 45°, keypull p05. 1 A42112 4P, 45°, keypull pos. 1 Shorting/Non-Shorting N Non-shorting contacts S Shorting contacts Terminations Z Solder lug C PC Thru-hole Mounting/Lock Style N With nut R With removable dress nut Contact Material Q Silver B Gold Seal NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–29 www.ckswitches.com A Series 4 & 5 Tumbler 1-4 Pole Switchlocks SWITCH AND LOCK FUNCTION CONNECTED TERMINALS NO. POLES SP 3P MODEL NO. A11413 * A31413 POS. 1 A-1 A-1, B-5, C-9 POS. 2 POS. 3 POS. 4 KEY PULL POSITIONS LOCK CONFIGURATION INDEXING POS. 1 A-4 A-4, B-8, C-12 Position 1 2 90º POS. 1 3P A3141U A-1, B-5, C-9 A-4, B-8, C-12 Positions 1 & 2 2 SP 3P A11513 * A31513 A-1 A-1, B-5, C-9 A-2 A-2, B-6, C-10 POS. 1 A-4 A-4, B-8, C-12 2 Position 1 3 POS. 1 3P A3151U A-1, B-5, C-9 A-2, B-6, C-10 A-4, B-8, C-12 2 Positions 1 & 3 45º 3 POS. 1 DP A21582 A-4, C-10 A-5, C-11 A-2, C-8 SP DP A11613 * A21613 A-1 A-1, C-7 A-2 A-2, C-8 A-3 A-3, C-9 3 Position 1 A-4 A-4, C-10 2 POS. 1 Position 1 2 3 4 30º POS. 1 SP A1161U * A-1 A-2 A-3 A-4 Positions 1 & 4 2 3 4 SP 4P A12112 * A42112 A-1 A-1, B-4, C-7, D-10 POS. 1 A-2 A-2, B-5, C-8, D-11 Position 1 45º 2 TERMINAL NUMBERS LEGEND = Detent Positions (30º , 45º or 90º ) = Key pull possible in these positions. = Stop Positions 4P MODEL *NOTE: Switchlock models A114XX, A115XX, A116XX and A12112 with ‘C’ terminations have additional terminal no. 8 as switch support only. This terminal is not connected electrically inside switch. All models with all options when ordered with ‘Q’ contact material. Terminal numbers molded on housing bottom. AX14 models not available with ‘S’ shorting contacts. Switchlock L 3P MODEL SP MODEL (omit terminals B, C & D) DP MODEL (omit terminals B & D) AX161X SWITCH FUNCTION SHOWN Part number shown: A116132Y2NZNQ Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–30 www.ckswitches.com A Series 4 & 5 Tumbler 1-4 Pole Switchlocks KEYING 2 KEYING OPTIONS 2 NICKEL PLATED BRASS KEYS CODE NO. ON KEY CODE NO. ON LOCK YES NO A126 OPTION CODE 1.635 (41,52) (4 TUMBLER) 1.733 (44,01) (5 TUMBLER) .798 (20,26) NOTE: All orders keyed alike, standard. For more than one key code, replacement keys, or other special features, consult Customer Service Center. .775 (19,68) Key part number: 115140126 NOTE: Key head shape subject to change without notice. LOCK TYPE A  4 TUMBLER LOCK WITH REMOVABLE DRESS NUT Y  4 TUMBLER LOCK WITH G  5 TUMBLER LOCK WITH ANTI-STATIC SWITCH Not available with AX23 models. ANTI-STATIC SWITCH AVAILABLE OPTION COMBINATIONS MOUNTING STYLES LOCK TYPES N R • G • A • Y NOTE: For available option combinations, see page L-38. LOCK FINISH 1  NICKEL 8  GLOSS BLACK AVAILABLE OPTION COMBINATIONS FINISH OPTIONS LOCK TYPES G A Y MOUNTING STYLES N • 1 2 • 8 • • • • R • • • NOTE: For available option combinations, see page M-38. SHORTING/NON-SHORTING N  NON-SHORTING CONTACTS (break-before-make) S  SHORTING CONTACTS (make-before-break) Not available with AX14 models. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–31 www.ckswitches.com Switchlock 2 STAINLESS STEEL L A Series 4 & 5 Tumbler 1-4 Pole Switchlocks TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE PC MOUNTING 4P MODEL 3P MODEL SP MODEL (omit terminals B, C ,D) DP MODEL (omit terminals B & D) MOUNTING/LOCK STYLE N  WITH NUT PANEL MOUNTING Nut part number: 937C00000 R  REMOVABLE DRESS NUT 1.036 (26,31) .270 (6,68) Switchlock L PANEL MOUNTING TYPICAL INSTALLATION Install hex nut with enough clearance to allow for dress nut and panel. Place switch through cutout in rear of panel. Install and tighten dress nut by hand, then tighten hex nut. Always tighten assembly with back of panel hex nut to avoid damaging front of panel. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–32 www.ckswitches.com A Series 4 & 5 Tumbler 1-4 Pole Switchlocks MOUNTING/LOCK STYLE Mounting Information (All Models) MOUNTING  STYLES AVAILABLE OPTION COMBINATIONS PANEL THICKNESS A & Y LOCK TYPES G LOCK TYPES N .105 (2,67) max. .195 (4,95) max. R .125 (3,18) max. .215 (5,46) max. MOUNTING STYLES LOCK FINISHES 1 N R LOCK TYPES 2 8 G • • • • • A Y • • Switch and Lock Assembly Instructions 1. P  lace lock assembly in mounting hole on panel, secure with mounting nut. 2. Align keying tab on switch assembly with keying slot on lock assembly. 3. Snap assemblies together. 4. Switch installation is permanent. Switch cannot be removed from lock after assembly. Attempting to separate switch and lock may cause damage to switchlock. CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATIBLE * CONTACT AND TERMINAL MATERIAL Q YES YES SILVER 2 B YES YES GOLD 1 1 RATING POWER LOW LEVEL/DRY CIRCUIT MOVABLE CONTACT: Copper alloy, with gold plate over nickel plate. STATIONARY CONTACTS & TERMINALS: Brass, with gold plate over nickel plate. 2 MOVABLE CONTACT: Coin silver, silver plated. STATIONARY CONTACTS & TERMINALS: Brass, silver plated (standard with all termination options). SWITCH-2.5 AMPS @ 125 V AC; 350 mA @ 125 V DC (UL/CSA). CARRY-5 AMPS CONTINUOUS. 0.4 VA MAX. @ 20 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. All models with all options when ordered with ‘Q’ contact material. SEAL NONE  NO SEAL E  EPOXY SEAL L Switchlock AVAILABLE HARDWARE Key Code: A126 Key Code: D001 4 TUMBLER 5 TUMBLER PART NO. (ONE KEY) PART NO. (ONE KEY) 115140126 115441001 Material: Brass Finish: Nickel plate Material: Brass Finish: Nickel plate Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–33 www.ckswitches.com