SL1003A090SM

Gas Discharge Tubes SL1003A Series SL1003A Series RoHS Description The SL1003A series has been especially developed for Broadband equipment. Special design features provide high levels of protection against fast rising transients in the 100V/μs to 1kV/μs range usually caused by lightning disturbances. These devices have ultra low capacitance 1.5pF and present insignificant signal losses up to 1.5GHz. These devices are extremely robust and are able to divert a 5000A pulse without destruction. For AC Power Cross of long duration, over-current protection is recommended. Agency Approvals Features AGENCY AGENCY FILE NUMBER E128662 3 Electrode GDT Graphical Symbol Additional Information Datasheet Resources © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/17 • RoHS compliant • Low insertion loss • Surface mountable • 5kA surge capability tested with 8/20/μs pulse as defined by IEC 61000-4-5 • GHz working frequency • Excellent response to fast rising transients • Can be used to meet Telcordia GR1089 without series resistance • 10/700 6kV capability, as per ITU-Tk.21, enhanced test level • 2000 Amp 2/10μs surge rating Applications Samples • Broadband equipment • ADSL equipment • XDSL equipment • Satellite and CATV equipment • General telecom equipment Gas Discharge Tubes SL1003A Series Electrical Characteristics Device Specifications (at 25°C) Part Number (@100V/µs) MIN SL1003A090 Life Ratings Impulse Impulse Insulation CapaciDC Breakdown Breakdown Breakdown Resistance tance in Volts1,2,3 in Volts2,3 In Volts2,3 (@100V/s) (@1MHz 72 TYP 90 MAX MAX 108 SL1003A230 184 230 276 (@1kV/µs) 0V Bias) MIN 700 MAX Arc Voltage Surge Life (on state (@200A Voltage) 10/1000µs) @1Amp Min Nominal Impulse Discharge Current (8/20µs) Nominal AC Discharge Current (10x1s @50Hz) AC Discharge Current DC Holdover Voltage4 (9 Cycles @ 50Hz) TYP (1 Application) TYP 109Ω (at 50V) Max Impulse Discharge Current @ 10/350µs 50 V 600 SL1003A250 200 250 300 750 SL1003A260 210 260 310 SL1003A300 240 300 360 750 850 SL1003A350 280 350 420 800 900 SL1003A400 320 400 480 850 950 SL1003A450 360 450 540 900 1000 SL1003A500 400 500 600 1100 1400 109Ω (at 100V) 1.5 pF ~10 to 35 V 300 shots 10 shots (@10kA) 10 A 2 kA 30 A 135 V Notes: 1. At delivery AQL 0.65 level II, DIN ISO 2859 2. In ionized mode, tested according to ITU-T Rec. K.12 3. Comparable to the silicon measurement Switching Voltage (Vs) 4. Reference REA PE-80, 0.2A. Tested to ITU-T Rec. K.12 and REA PE-80 < 150 msecs. Product Characteristics Materials Leaded Device: Tin-plated copper wire Core and Surface Mount: Dull Tin-plated Product Marking Littelfuse 'LF' Mark, voltage and date code Glow to Arc Transition Current ~1 Amp Glow Voltage ~60 to 200 Volts Storage and Operational Temperature -40 to +90°C © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/17 Gas Discharge Tubes SL1003A Series Device Dimensions For SL1003A series: Dimensions are in millimeters [and inches] 'C' Type Core Devices 'R' Type Radial Lead Devices (SL1003AxxxR-001) PROFILE VIEW TOP VIEW Ø6.0 ± 0.1 [0.236 ± 0.039] 12.2 - 0.2 [0.480 - 0.079] 8.1 ± 0.2 [0.236 ± 0.039] 4.3 + 1.5 [0.169 + 0.059] PROFILE VIEW TOP VIEW 8.1 ± 0.2 [0.319 ± 0.0079] Ø6.0 ± 0.1 [0.236 ± 0.0039] 6.0 ± 0.5 [0.236 ± 0.020] 4.4 ± 0.3 [0.173± 0.012] 4.4 ± 0.3 [0.173± 0.012] 0.8 DIA. [0.031] 'R' Type Radial Lead Devices (SL1003AxxxR and SL1003AxxxRF) PROFILE VIEW TOP VIEW 12.2 - 2 [0.480 - 0.079] 6.0 ± 0.1 [0.236 ± 0.039] 'SM' Type Surface Mount Devices TOP VIEW PROFILE VIEW 6.0 ± 0.1 8.1 ± 0.2 [0.319 ± 0.0079] 3.20 [0.126] 2.8 [0.110] 2.8 [0.110] Ø6.0 ± 0.1 8.1 ± 0.2 [0.236 ± 0.039] 1.5 [0.059] 6.0 ± 0.5 [0.236 ± 0.020] 4.3 + 1.5 [0.169 + 0.059] 8 6. Ø 0.5 [0.019] ± 0.8 DIA. [0.031] 1 3.9 ± 0.3 [0.154± 0.012] 0. 3.9 ± 0.3 [0.154± 0.012] TOP VIEW 2.20 [0.087] 1.2 Max [0.047] PROFILE VIEW TOP VIEW 12.2 - 2 [0.480 - 0.079] 6.0 ± 0.1 [0.236 ± 0.039] 1.20 [0.04] 1.20 [0.047] 8.1 ± 0.2 [0.236 ± 0.039] 7.00 [0.275] allow space for product clearance 6.000 [0.236] 6.7 ± 0.5 [0.263 ± 0.020] 2.10 2.10 [0.083] [0.083] 4.3 + 1.5 [0.169 + 0.059] 6.40 [0.252] 6.0 ± 0.5 [0.236 ± 0.020] 7.60 [0.299] 3.9 ± 0.3 [0.154± 0.012] © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/17 3.9 ± 0.3 [0.154± 0.012] 0.8 DIA. [0.031] 8.80 [0.346] Gas Discharge Tubes SL1003A Series Soldering Parameters - Reflow Soldering (Surface Mount Devices) Pb-free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 180 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 3°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max. Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds 260+0/-5 °C Time within 5°C of Actual Peak Temperature (tp) 10 – 30 seconds Ramp-down Rate 6°C/second max. Time 25°C to Peak Temperature (TP) 8 minutes max. Do not exceed 260°C Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) 25 Peak Temperature (TP) tP TP Temperature Reflow Condition tS time to peak temperature (t 25ºC to peak) Time Soldering Parameters - Wave Soldering (Thru-Hole Devices) Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 280° C Maximum Solder Dwell Time: 2-5 seconds 40 230 240 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 20 0 0 30 20 10 Temperature (°C) - Measured on bottom side of board 300 Time (Seconds) Cooling Time Preheat Time Dwell Time Soldering Parameters - Hand Soldering Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/17 Gas Discharge Tubes SL1003A Series Packaging 'C' Type Core Items: Package bulk pack in polybag, 500 pcs/bag 'R' and ‘RF’ Type Radial Lead Items: Packed in tray, 100 pcs/tray 'SM' Type Surface Mount Items: Packaged tape and reel carrier, 700 pcs/reel (specifications below) 0.4 ± 0.05 [0.016 ± 0.0020] Dimensions are in millimeters [and inches] a 5° m x 7.4 ± 0.1 [0.291 ± 0.0039] R0.3 typical [0.012] 275.0 [10.83] 100.0 [3.94] 76.0 [2.99] 24 ± 0.3 [ 0.945 ± 0.012] 11.5 ± 0.1 [0.453 ± 0.0039] 4 [0.157] 14 [0.551] 8.6 ± 0.1 [0.339 ± 0.0039] 20° m ax 3 [0.118] 1.75 ± 0.1 [0.069 ± 0.0039] Dimensions are in millimeters [and inches] 10x4 ± 0.1 = 40 ± 0.2 Ø1.5 +0.1 [10x0.157 ± 0.004 = 1.575 ± 0.008] [0.059 +0.0039] Ø1.5 +0.1 Ø4 ± 0.1 Ø2 ± 0.1 [0.059 +0.0039] [0.157 ± 0.0039] [0.079 ± 0.0039] 25.0 [0.98] 17.7 [0.697] Direction of Feed 12 ± 0.1 [0.472 ± 0.0039] 3 [0.118] 9 [0.354] 6.1 ± 0.1 [0.240 ± 0.0039] SMD-tape according to IEC 60286-3 Part Numbering System and Ordering Information SL1003 A XXX XX Type 3 Pole Arrestor Voltage Pin Configuration C = Core type (Packed in polybag, 500pcs/bag) R = Radial Lead without Failsafe (Packed in tray, 100pcs/tray) RF = Radial Lead with Failsafe (Packed in tray, 100pcs/tray) SM = Surface Mount (Packed in carrier and tape, 700pcs/reel) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/17