SMDJ36A-HRA

TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W RoHS Pb e3 Description The SMDJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. These are available with a variety of up-screening options for enhanced reliability. Uni-directional Bi-directional Features & Benefits Additional Information ■ High reliability devices with fabrication and assembly lots traceability ■ Excellent clamping capability ■ Enhanced reliability screening options are available in reference to MIL-PRF-19500. Refer to screen process table for more detail on screening options ■ Typical IR less than 2µA above 12V ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Built-in strain relief Resources Accessories Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation at TA=25ºC by 10/1000µs waveform (Fig.1)(Note 1), (Note 2) PPPM 3000 W 6.5 W IFSM 300 A VF 3.5 V Power Dissipation on infinite heat sink at PM(AV) TA=50OC Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only Operating Junction and Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient TJ , TSTG -65 to 150 ■ High Temperature soldering guaranteed: 260°C/40 seconds at terminals ■ Plastic package has Underwriters laboratory flammability 94V-O ■ Meet MSL level1, per J-STD-020, LF maximun peak of 260°C ■ VBR @TJ= VBR@25°C x (1+αT ■ Matte tin lead–free plated x (TJ - 25)) (αT:Temperature ■ Halogen free and RoHS Coefficient) compliant ■ Glass passivated chip junction ■ 2nd level interconnect is Pb■ 3000W peak pulse power free per IPC/JEDEC J-STDcapability at 10/1000μs 609A.01 waveform, repetition rate (duty ■ Recognized to UL 497B as an cycles):0.01% Isolated Loop Circuit Protector ■ Fast response time: typically less than 1.0ps from 0V to BV min Samples Agency Approvals Agency ■ Low incremental surge resistance Applications SMDJ-HRA devices are ideal for the high reliability protection of I/ O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Functional Diagram °C RuJL 15 °C/W RuJA 75 °C/W Bi-directional Cathode Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. Anode Uni-directional 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21 TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W Electrical Characteristics Part Number (Uni) SMDJ5.0A-HRA SMDJ6.0A-HRA SMDJ6.5A-HRA SMDJ7.0A-HRA SMDJ7.5A-HRA SMDJ8.0A-HRA SMDJ8.5A-HRA SMDJ9.0A-HRA SMDJ10A-HRA SMDJ11A-HRA SMDJ12A-HRA SMDJ13A-HRA SMDJ14A-HRA SMDJ15A-HRA SMDJ16A-HRA SMDJ17A-HRA SMDJ18A-HRA SMDJ20A-HRA SMDJ22A-HRA SMDJ24A-HRA SMDJ26A-HRA SMDJ28A-HRA SMDJ30A-HRA SMDJ33A-HRA SMDJ36A-HRA SMDJ40A-HRA SMDJ43A-HRA SMDJ45A-HRA SMDJ48A-HRA SMDJ51A-HRA SMDJ54A-HRA SMDJ58A-HRA SMDJ60A-HRA SMDJ64A-HRA SMDJ70A-HRA SMDJ75A-HRA SMDJ78A-HRA SMDJ85A-HRA SMDJ90A-HRA SMDJ100A-HRA SMDJ110A-HRA SMDJ120A-HRA SMDJ130A-HRA SMDJ150A-HRA SMDJ170A-HRA Part Number (Bi) SMDJ5.0CA-HRA SMDJ6.0CA-HRA SMDJ6.5CA-HRA SMDJ7.0CA-HRA SMDJ7.5CA-HRA SMDJ8.0CA-HRA SMDJ8.5CA-HRA SMDJ9.0CA-HRA SMDJ10CA-HRA SMDJ11CA-HRA SMDJ12CA-HRA SMDJ13CA-HRA SMDJ14CA-HRA SMDJ15CA-HRA SMDJ16CA-HRA SMDJ17CA-HRA SMDJ18CA-HRA SMDJ20CA-HRA SMDJ22CA-HRA SMDJ24CA-HRA SMDJ26CA-HRA SMDJ28CA-HRA SMDJ30CA-HRA SMDJ33CA-HRA SMDJ36CA-HRA SMDJ40CA-HRA SMDJ43CA-HRA SMDJ45CA-HRA SMDJ48CA-HRA SMDJ51CA-HRA SMDJ54CA-HRA SMDJ58CA-HRA SMDJ60CA-HRA SMDJ64CA-HRA SMDJ70CA-HRA SMDJ75CA-HRA SMDJ78CA-HRA SMDJ85CA-HRA SMDJ90CA-HRA SMDJ100CA-HRA SMDJ110CA-HRA SMDJ120CA-HRA SMDJ130CA-HRA SMDJ150CA-HRA SMDJ170CA-HRA Marking UNI BI RDEH RDGH RDKH PDMH PDPH PDRH PDTH PDVH PDXH PDZH PEEH PEGH PEKH PEMH PEPH PERH PETH PEVH PEXH PEZH PFEH PFGH PFKH PFMH PFPH PFRH PFTH PFVH PFXH PFZH RGEH PGGH PGKH PGMH PGPH PGRH PGTH PGVH PGXH PGZH PHEH PHGH PHKH PHMH PHRH DDEH DDGH DDKH DDMH DDPH DDRH DDTH DDVH DDXH DDZH DEEH DEGH DEKH DEMH DEPH DERH DETH DEVH DEXH DEZH DFEH DFGH DFKH DFMH DFPH DFRH DFTH DFVH DFXH DFZH DGEH DGGH DGKH DGMH DGPH DGRH DGTH DGVH DGXH DGZH DHEH DHGH DHKH DHMH DHRH Reverse Stand off Voltage VR (Volts) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 170.0 Breakdown Voltage VBR (Volts) @ IT MIN MAX (mA) Maximum Clamping Voltage VC @ Ipp (V) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 189.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 209.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 2.75.0 Test Current IT Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @ VR (µA) Agency Approval 326.1 291.3 267.9 250.0 232.6 220.6 208.3 194.8 176.5 164.8 150.8 139.5 129.3 123.0 115.4 108.7 102.7 92.6 84.5 77.1 71.3 66.1 62.0 56.3 51.6 46.5 43.2 41.3 38.8 36.4 34.4 32.1 31.0 29.1 26.5 24.8 23.8 21.9 20.5 18.5 16.9 15.5 14.4 12.3 10.9 800 800 500 200 100 50 20 10 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: 1. SMDJ-HRA voltage binning can be specified by customer’s request via contacting Littlefuse service 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21 TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W Screen Process 100% Vision Inspection 100% High Temperature Storage Life (168hrs,175°C) 100% X-RAY inspection 100% Temperature Cycle Test (-55 to150°C, 20 cycles, dwell time 15 min) 100% Reflow (2X) 100% Surge Test (2x) 100% HTRB 150°C Bias=VR(80% breakdown voltage, 96hrs, and each direction at 96 hrs for Bi-directional products) Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 2074 MIL-STD-750 method 1031 MIL-STD-750 method 2076 MIL-STD-750 method 1051 JEDEC J-STD-020 MIL-STD-750 method 4066 MIL-STD-750 method 1038 MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR IR VF IT IT IR Vc VBR VR V IR IT V Ipp Ipp PPPM VR VBR VC IR VF VR VBR Vc Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 TVS Transients Clamping Waveform Figure 2 Peak Pulse Power Rating Voltage Transients PPPM-Peak Pulse Power (KW) 1000 Voltage or Current Voltage Across TVS Current Through TVS 100 10 1 0.31x0.31" (8.0x8.0mm) 0.1 Copper Pad Area 0.001 Time 3 0.01 0.1 1 td-Pulse Width (ms) 10 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21 TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) Figure 4 Pulse Waveform Figure 3 Pulse Derating Curve 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (P PP ) or Current (I PP ) Derating in Percentage % 100 80 60 40 20 0 0 tr=10µsec Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 10/1000µsec. Waveform as defined by R.E.A td 0 25 1.0 0 T J - Initial Junction Temperature (ºC) Cj (pF) PM(AV), Steady Sate Power Dissipation (W) Bi-directional V= OV Uni-directional V= OV Uni-directional @ VR 100 Bi-directional @ VR 10 1 1.0 3.0 4.0 Figure 6 Steady State Power Derating Curve 100000 1000 2.0 t-Time (ms) Figure 5 Typical Junction Capacitance 10000 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature(ºC) Figure 7 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional only IFSM - Peak Forward Surge Current (A) 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21 TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Ramp-up TL 217°C - Temperature (TL) (Liquidus) Reflow 60 – 150 seconds - Time (min to max) (ts) Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Polarity Terminal Critical Zone TL to TP Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) Environmental Specifications 0.007 ounce, 0.21 grams JEDEC DO214AB. Molded plastic body over glass passivated junction Color band denotes positive end (cathode) except Bidirectional. Matte Tin-plated leads, Solderable per JESD22-B102 Case tL Ts(max) Physical Specifications Weight tp TP Temperature (T) Reflow Condition JESD22-A103 JESD22-A108 JESD22-A106 JEDEC-J-STD-020, Level 1 JESD22-A101 JESD22-A111 High Temp. Storage HTRB Thermal Shock MSL H3TRB RSH Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band (for Uni-directional products only) A B C D E F G H I J K L C A B H D F E G J K Inches Millimeters Min Max Min Max 0.114 0.260 0.220 0.079 0.030 0.002 0.305 0.006 0.129 0.094 0.094 0.126 0.280 0.245 0.103 0.060 0.008 0.320 0.012 0.165 - 2.900 6.600 5.590 2.060 0.760 0.051 7.750 0.152 3.300 2.400 3.200 7.110 6.220 2.620 1.520 0.203 8.130 0.305 4.200 - 2.400 L I Solder Pads (all dimensions in mm) 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21 TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W Part Numbering System SMDJ Part Marking System XXX C A -HR A Cathode Band F Without Group B Test High Reliability 5% Voltage Tolerance XXXX YMXXX Bi-directional Voltage Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Series Packaging Part number Component Package Quantity Packaging Option Packaging Specification SMDJxxxXX-HRA DO-214AB 3000 Tape & Reel – 16mm tape /13” reel EIA STD RS-481 SMDJxxxXX-HRAT7 DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) Cathode 0.63 (16.0) 0.315 (8.0) Optional 7” 7.0 (187) 13” 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) 0.059 DIA (1.5) Cover tape Dimensions are in inches (and millimeters). Direction of Feed 6 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21 TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W RTCA/DO-160G Wave 4 RTCA/DO-160G Wave 3 Notes: 1. Voltage and current are not required to be in phase. 2. The waveshape may have either a damped sine or cosine waveshape. RTCA/DO-160G Wave 5 7 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21 TVS Diodes Datasheet SMDJ-HRA Series Surface Mount – 3000W Pin Injection Protection Per RTCA/DO-160G 25C Part Number (Uni) Part Number (Bi) Wave 3 L5 70C Wave 4 (6.4/69us) L3 L4 Wave 5a Wave (40/120us) 3 L5 L3 L4 L5 120C Wave 4 (6.4/69us) L3 L4 Wave 5a Wave (40/120us) 3 L5 L3 L4 L5 Wave 4 (6.4/69us) L3 L4 Wave 5a (40/120us) L5 L3 L4 128A 60A 150A 320A 300A 750A 128A 60A 150A 320A 300A 750A 128A 60A 150A 320A 300A 750A SMDJ5.0A-HRA SMDJ6.0A-HRA SMDJ6.5A-HRA SMDJ7.0A-HRA SMDJ7.5A-HRA SMDJ8.0A-HRA SMDJ8.5A-HRA SMDJ9.0A-HRA SMDJ10A-HRA SMDJ11A-HRA SMDJ12A-HRA SMDJ13A-HRA SMDJ14A-HRA SMDJ15A-HRA SMDJ16A-HRA SMDJ17A-HRA SMDJ18A-HRA SMDJ20A-HRA SMDJ22A-HRA SMDJ24A-HRA SMDJ26A-HRA SMDJ28A-HRA SMDJ30A-HRA SMDJ33A-HRA SMDJ36A-HRA SMDJ40A-HRA SMDJ43A-HRA SMDJ45A-HRA SMDJ48A-HRA SMDJ51A-HRA SMDJ54A-HRA SMDJ58A-HRA SMDJ60A-HRA SMDJ64A-HRA SMDJ70A-HRA SMDJ75A-HRA SMDJ78A-HRA SMDJ85A-HRA SMDJ90A-HRA SMDJ100A-HRA SMDJ110A-HRA SMDJ120A-HRA SMDJ130A-HRA SMDJ150A-HRA SMDJ170A-HRA SMDJ5.0CA-HRA SMDJ6.0CA-HRA SMDJ6.5CA-HRA SMDJ7.0CA-HRA SMDJ7.5CA-HRA SMDJ8.0CA-HRA SMDJ8.5CA-HRA SMDJ9.0CA-HRA SMDJ10CA-HRA SMDJ11CA-HRA SMDJ12CA-HRA SMDJ13CA-HRA SMDJ14CA-HRA SMDJ15CA-HRA SMDJ16CA-HRA SMDJ17CA-HRA SMDJ18CA-HRA SMDJ20CA-HRA SMDJ22CA-HRA SMDJ24CA-HRA SMDJ26CA-HRA SMDJ28CA-HRA SMDJ30CA-HRA SMDJ33CA-HRA SMDJ36CA-HRA SMDJ40CA-HRA SMDJ43CA-HRA SMDJ45CA-HRA SMDJ48CA-HRA SMDJ51CA-HRA SMDJ54CA-HRA SMDJ60CA-HRA - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass - pass pass - pass pass - pass pass - pass pass - pass pass - pass pass - pass - pass - pass - pass - pass - pass - pass - pass - pass - pass - pass - pass - Note: 1. L1 = Level1, L2 = Level 2, L3 = Level 3, L4 = Level 4, L5 = Level 5 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 8 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/27/21