SV6025L2TP

Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs RoHS Description This SVxx25xx high temperature SCR series is ideal for unidirectional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and inrush current controllers. These SCRs have a low gate current, (IGT) trigger level of 6mA and 10mA maximum at approximately 1.5V for SVxx25x1 and SVxx25x2, respectively. Features & Benefits ■ Halogen free and RoHS compliant ■ 150°C maximum junction temperature ■ UL Recognized to UL 1557 as an Electrically Isolated Semiconductor Device ■ Surge capability up to 350 A at 60 Hz half cycle Agency Approval Agency ■ High dv/dt performance Agency File Number L Packages: E71639 Applications Typical applications include AC Generator (ACG) rectifiers, battery voltage regulators, generic converters, inrush current controller in various AC to DC applications and soft starter for low power AC motor. Additional applications include controls for power tools, home/brown good and white goods appliances. Internally constructed isolated packages offered for ease of heat sinking with high isolation voltage. Main Features Symbol Value Unit IT(RMS) 25 A VDRM /VRRM 600 V IGT 6 to 10 mA Schematic Symbol A K G 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21 Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs Absolute Maximum Ratings Symbol Parameter VDSM/VRSM Peak non-repetitive blocking voltage Test Conditions Value Unit PW=100 μs 800 V 25 A 16 A IT(RMS) RMS on-state current IT(AV) Average on-state current ITSM Peak non-repetitive surge current I2t I2t Value for fusing SVxx25Lx TC = 100°C SVxx25Rx TC = 125°C SVxx25Nx SVxx25Lx TC = 100°C SVxx25Rx TC = 125°C SVxx25Nx single half cycle; f = 50Hz; TJ (initial) = 25°C single half cycle; f = 60Hz; TJ (initial) = 25°C tp = 8.3 ms di/dt Critical rate of rise of on-state current IGM Peak gate current PG(AV) Average gate power dissipation Tstg TJ 300 A 350 510 A 2s f = 60Hz ; TJ = 150°C 125 A/μs TJ = 150°C 4 A TJ = 150°C 0.8 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 150 °C Note: xx=voltage/10, x=sensitivity Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions IGT VD = 12V RL = 60 Ω VD = 12V RL = 60 Ω VGT dv/dt SVxx25x1 SVxx25x2 MAX. 6 10 MIN. 2 5 MAX. VD = 67% VDRM; gate open; TJ = 125°C MIN. VD = 67% VDRM; gate open; TJ = 150°C 1.5 1.5 400 800 200 400 Unit mA V V/μs VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C MIN. 0.2 0.2 V IH IT = 400mA (initial) MAX. 22 35 mA tq IT = 2A; tp = 50µs; dv/dt = 5V/µs; di/dt = 30A/µs MAX. 25 25 μs tgt IG = 2 x IGT PW = 15µs IT = 50A TYP. 2.6 2.6 μs Note: xx=voltage/10, x=package Static Characteristics Symbol Test Conditions VTM Component IT = 50A; tp = 380 µs MAX. TJ = 25°C IDRM / IRRM VDRM = VRRM Value Unit 1.6 V 10 MAX. TJ = 125°C 1000 TJ = 150°C μA 4000 Thermal Resistances Symbol RƟ(JC) Parameter Value SVxx25Rx SVxx25Nx SVxx25Lx Junction to case (AC) 1.0 2.3 Unit °C/W Note: xx=voltage/10, x=package 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21 Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs Figure 2: Normalized DC Gate Trigger Voltage vs. Junction Temperature Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature 1.4 2.0 1.8 1.2 Ratio of VGT/VGT(TJ=25˚C) Ratio of IGT/IGT(TJ=25˚C) 1.6 1.4 1.2 1.0 0.8 0.6 1.0 0.8 0.6 0.4 0.4 0.2 0.2 0.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ)- ºC 135 0.0 150 Figure 3: Normalized DC Holding Current vs. Junction Temperature 50 1.8 45 Instantaneous On-State Current(IT) -Amps 2.0 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ)- ºC 135 30 25 20 15 10 5 0 150 0.6 Maximum Allowable Case Temperature (TC) - °C Average On-State Power Dissipation (PD(AV))-Watts 140 30 25 20 15 10 0.8 0.9 1 1.1 1.2 1.3 1.4 Instantaneous On-State Voltage(VT) -Volts 1.5 1.6 SVxx25Rx SVxx25Nx 130 SVxx25Lx 120 110 100 90 80 5 25 30 - Amps 0.7 Figure 6: Maximum Allowable Case Temperature vs. RMS On-State Current 35 10 15 20 RMS On-State Current (IT(RMS)) 150 35 150 5 135 40 40 0 10 35 60 85 110 Junction Temperature (TJ)- ºC TJ=25º Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 0 -15 Figure 4: On-State Current vs. On-State Voltage (Typical) 1.6 Ratio of IH/IH(TJ=25˚C) -40 70 35 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 0 5 10 15 20 25 30 RMS On-State Current [IT(RMS)] - Amps 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21 Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Figure 8: Peak Capacitor Discharge Current 150 1000 Maximum Allowable Case Temperature (TC) - °C 140 130 Peak Discharge Current (ITM) - Amps SJxx25Rx SVxx25Rx SJxx25Nx SVxx25Nx SJxx25Lx SVxx25Lx 120 110 100 90 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 80 100 ITRM tW 70 10 0 5 10 15 0.5 18 10.0 1.0 50.0 Pulse Current Duration (tW) - ms Average On-State Current [IT(AVE)] - Amps Figure 9: Peak Capacitor Discharge Current Derating 1.2 Normalized Peak Current 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 Case Temperature (TC) - ºC Figure 10: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive)On-state Current (ITSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 100 10 1 10 100 1000 Surge Current Duration -- Full Cycles 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21 Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs Soldering Parameters Pre Heat - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (tL) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C +0/-5 Ramp-up TL Body Material Lead Material tL T S(max) Preheat T S(min) Ramp-dow Ramp-down tS °C 25 time to peak temperature Physical Specifications Terminal Finish tP TP Temperature - Temperature Min (Ts(min)) Pb – Free assembly 150°C Reflow Condition Time Environmental Specifications 100% Matte Tin-plated UL Recognized compound meeting flammability rating V-0 Copper Alloy Test AC Blocking Temperature Cycling Design Considerations Temperature/Humidity Careful selection of the correct component for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Resistance to Solder Heat Solderability Lead Bend Moisture Sensitivity Level 5 Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 150°C for 1008 hours MIL-STD-750, M-1051, 1000 cycles; -55°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 160V - DC: 85°C; 85% rel humidity MIL-STD-750 Method 2031 ANSI/J-STD-002, category 3, Test A MIL-STD-750, M-2036 Cond E Level 1, JEDEC-J-STD-020D © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21 Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 A B C D E F G H J K L M N O P R B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE K N M J Inches Millimeters Min Max Min Max 0.380 0.105 0.230 0.590 0.142 0.110 0.540 0.025 0.195 0.095 0.060 0.085 0.018 0.178 0.045 0.038 0.420 0.115 0.250 0.620 0.147 0.130 0.575 0.035 0.205 0.105 0.075 0.095 0.024 0.188 0.060 0.048 9.65 2.67 5.84 14.99 3.61 2.79 13.72 0.64 4.95 2.41 1.52 2.16 0.46 4.52 1.14 0.97 10.67 2.92 6.35 15.75 3.73 3.30 14.61 0.89 5.21 2.67 1.91 2.41 0.61 4.78 1.52 1.22 Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 A B C D E F G H J K L M N O P R ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE K J GATE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 6 Inches Millimeters Min Max Min Max 0.380 0.105 0.230 0.590 0.142 0.110 0.540 0.025 0.195 0.095 0.060 0.085 0.018 0.178 0.045 0.038 0.420 0.115 0.250 0.620 0.147 0.130 0.575 0.035 0.205 0.105 0.075 0.095 0.024 0.188 0.060 0.048 9.65 2.67 5.84 14.99 3.61 2.79 13.72 0.64 4.95 2.41 1.52 2.16 0.46 4.52 1.14 0.97 10.67 2.92 6.35 15.75 3.73 3.30 14.61 0.89 5.21 2.67 1.91 2.41 0.61 4.78 1.52 1.22 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21 Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs Dimensions — TO- 263AB (N-package) — D2-Pak Surface Mount TC MEASURING POINT B AREA: 0.11 in C V 2 Dimension E ANODE A B C D E F G H J K S V U W 8.41 .331 7.01 .276 A S W U K GATE CATHODE G J 8.13 .320 H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 Inches Millimeters Min Max Min Max 0.360 0.380 0.178 0.025 0.045 0.060 0.095 0.092 0.018 0.090 0.590 0.035 0.002 0.040 0.370 0.420 0.188 0.035 0.060 0.075 0.105 0.102 0.024 0.110 0.625 0.045 0.010 0.070 9.14 9.65 4.52 0.64 1.14 1.52 2.41 2.34 0.46 2.29 14.99 0.89 0.05 1.02 9.40 10.67 4.78 0.89 1.52 1.91 2.67 2.59 0.61 2.79 15.88 1.14 0.25 1.78 16.89 .665 8.89 .350 1.40 .055 3.81 .150 2.03 .080 6.60 .260 Product Selector Part Number SVxx25L1 SVxx25R1 SVxx25N1 SVxx25L2 SVxx25R2 SVxx25N2 Voltage 600V X X X X X X Gate Sensitivity Type Package 6mA 6mA 6mA 10mA 10mA 10mA Standard SCR Standard SCR Standard SCR Standard SCR Standard SCR Standard SCR TO-220L TO-220R TO-263 TO-220L TO-220R TO-263 Note: xx = Voltage/10 Packing Options Part Number Marking Weight Packing Mode Base Quantity SVxx25LxTP SVxx25RxTP SVxx25NxTP SVxx25NxRP SVxx20Lx SVxx20Rx SVxx20Nx SVxx20Nx 2.2g 2.2g 1.6g 1.6g Tube Tube Tube Embossed Carrier 1000 (50 per tube) 1000 (50 per tube) 1000 (50 per tube) 500 Note: xx=voltage/10, x=sensitivity 7 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21 Thyristors Datasheet SVxx25xx Series 25 Amp High Junction Temperature SCRs Part Numbering System Part Marking System T0-220 AB - (L and R Package) T0-263 AB - (N Package) SV 60 25 L 1 TP Packing Type TP: Tube Pack RP: Reel Pack Component Type SV: High Temperature High dv/dt SCR SV6025L1 YM Sensitivity & Type 1: 6mA 2: 10mA Votage Rating 60: 600V Current Rating 25: 25A ® Package Type L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D2-Pak) Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DI A (1.5) 0.945 (24.0) 0.827 (21.0) Cathode * * Co ver tape Anode 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of F eed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 8 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/16/21