HMC876LC3C

HMC876LC3C v01.1009 20 Gbps Clocked COMPARATOR with RSECL OUTPUT STAGE Typical Applications Features Propagation Delay Clock to Output: 120 ps Overdrive & Slew Rate Dispersion: 10 ps Minimum Pulse Width: 60 ps Resistor Programmable Hysteresis Differential Clock Control Input Bandwidth: 10 GHz Power Dissipation: 150 mW RSCML and RSPECL Versions Available 16 Lead 3x3mm SMT Package: 9mm 2 6 COMPARATORS - SMT The HMC876LC3C is ideal for: • ATE Applications • High Speed Instrumentation • Digital Receiver Systems • Pulse Spectroscopy • High Speed Trigger Circuits • Clock & Data Restoration Functional Diagram General Description The HMC876LC3C is a SiGe monolithic, ultra fast comparator which features reduced swing ECL output drivers and clock inputs. The comparator supports 20 Gbps operation while providing 120 ps clock to data output delay and 60 ps minimum pulse width with 0.2 ps rms random jitter (RJ). 25 Gbps operation can be achieved with reduced output voltage swing. Overdrive and slew rate dispersion are typically 10 ps, making the device ideal for a wide range of applications from ATE to broadband communications. The reduced swing ECL output stage is designed to directly drive 400 mV into 50 Ohms terminated to -2V. The HMC876LC3C features high speed latches with programmable hysteresis, and is configured to operate as a clocked comparator. Electrical Specifi cations TA = +25C[1], Vcci = +3.3V, Vcco = 0V, CLK/ CLK = 1.6 to 2.4V, Vee = -3V, V TERM = -2V Parameter Input Voltage Range Input Differential Voltage Input Offset Voltage Input Offset Voltage, Temperature Coefficient Input Bias Current Input Bias Current Temperature Coefficient Input Offset Current Input Impedance Common Mode Input Impedance Differential Input Impedance Hysteresis Rhys = ∞ Conditions Min. -2 -1.75 ±5 15 15 50 4 50 350 15 ±1 Typ. Max 2 1.75 Units V V mV μV / °C uA nA / °C μA Ω KΩ KΩ mV 6 - 66 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC876LC3C v01.1009 20 Gbps Clocked COMPARATOR with RSECL OUTPUT STAGE Latch Enable Characteristics Parameter Clock Enable Input Impedance Clock to Data Output Delay, tpd Clock Enable Input Range Clock Max Frequency, fmax 1.6 25 Conditions Each Pin Min. Typ. 50 120 2.4 Max Units Ω ps 6 COMPARATORS - SMT 6 - 67 V GHz DC Output Characteristics, Vcco = 0V, VTERM = -2V Parameter Output Voltage High Level, Voh Output Voltage Low Level, Vol Output Voltage Differential Swing Conditions Min. -0.96 -1.30 320 Typ. Max -0.89 -1.21 340 Units V V mV AC Performance Parameter VOD Dispersion Tpd vs. Common Mode Dispersion, -1.75V