HPX030AS

Microstructure Pressure Sensors 0 mm Hg to 300 mm Hg through 0 psi to 100 psi HPX Series FEATURES • Miniature package size • Available in gage and absolute sensing types • Non-compensated and noncalibrated • Pressure ranges from 0 psi to 100 psi • Response time is 1 ms typical • Two package styles, DIP and SOIC • Wide operating temperature range • Surface mount and through hole mounting TYPICAL APPLICATIONS • Medical equipment • Altimeters and barometers • Pneumatic controls • Leak detection • Consumer goods WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Sensing and Control The HPX Series Pressure Sensors provide accurate, low cost sensing in two different package configurations, DIP (Dual In-line Package) and SOIC (Small Outline Integrated Circuit). The gage devices come in a 6-pin DIP and the absolute devices come in an 8 pin surface mount SOIC package. Both sensor styles are non-amplified and non-calibrated. The user may provide the HPX Series sensors with amplification and signal conditioning circuitry to meet specific application requirements. These easy-to-use sensors feature Wheatstone bridge construction, silicon piezoresistive technology and ratiometric output for proven application flexibility, design simplicity and ease of end product manufacturing. These devices are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Microstructure Pressure Sensors 0 mm Hg to 300 mm Hg through 0 psi to 100 psi HPX Series GENERAL SPECIFICATIONS – GAGE (DIP) Parameter Excitation Input impedance Output impedance Min. – 4k 4k Typ. 3.0 5k 5k Max. 10.0 6k 6k Unit Vdc Ohm Ohm ENVIRONMENTAL SPECIFICATIONS – GAGE (DIP) Parameter Operating temperature range Storage Vibration Weight Life Lead solder temperature Characteristic -20 °C to 100 °C [-4 °F to 212 °F] -40 °C to 125 °C [-40 °F to 257 °F] 1.5 mm at 10 Hz to 50 Hz