3-146502-7

Wi-Fi 6/ 6E TRIPLE BAND ON BOARD ANTENNA Part Numbers: 2118908-1, 2118908-2 FEATURES & BENEFITS • • • • • WiFi 6, also including WiFi 6E new 6GHz band, Bluetooth, ZigBee Global Frequency coverage On board SMD mount PCB IFA antenna Minimal keep out zone requirement Performance dependent on ground plane size and design SPECIFICATIONS Frequency Range (MHz) 2400-2485 5150-5875 5925-7125 < 2.0:1 < 2.5:1 < 2.5:1 80% 85% 80% Peak Gain 2.3dBi 2.8dBi 2.3dBi Average Gain -1.0dBi -0.7dBi -1.0dBi VSWR Average Efficiency Power Handling 10 Watt cw Feed Point Impedance 50 ohms Polarization Linear Size 18.9 mm x 6.2 mm x 0.76 mm Weight < 0.2 g Mounting Surface mount Operating Temperature -40 to +85°C Storage Temperature -40 to +85°C Packaging Specification Bag & Box / Tape & Reel Hazardous Materials A certificate of conformance is available from the product page on TE website. Data measured in free space and on reference ground plane of 33 mm length and 35 mm width, application data might vary DATA AND DEVICES /// WI-FI 6/ 6E TRIPLE BAND ON BOARD ANTENNA Wi-Fi 6/ 6E TRIPLE BAND ON BOARD ANTENNA Standard Antenna Solutions RF DATA VSWR Return Loss Efficiency Data measured in free space and on reference ground plane of 33 mm length and 35 mm width, application data might vary DATA AND DEVICES /// WI-FI 6/ 6E TRIPLE BAND ON BOARD ANTENNA Wi-Fi 6/ 6E TRIPLE BAND ON BOARD ANTENNA Standard Antenna Solutions RADIATION PATTERN Test setup Azimuth Z 0° 90° X 0° 90°Y Azimuth Plane Elevation 1 Plane Elevation 2 Plane Elevation 1 Elevation 2 Data measured in free space and on reference ground plane of 33 mm length and 35 mm width, application data might vary DATA AND DEVICES /// WI-FI 6/ 6E TRIPLE BAND ON BOARD ANTENNA Wi-Fi 6/ 6E TRIPLE BAND ON BOARD ANTENNA Standard Antenna Solutions MOUNTING GUIDE Dimension: mm Diagrams is not into scale NOTES: 1. Suggested matching component pads if device specific tuning needed by either components and materials at close proximity or different ground plane size and layout 2. Antenna must be mounted on the edge of PCB. 3. NC = No connection (mechanical mounting pads). 4. No copper allowed in designated area on all PCB layers – 5. For more information please call TE. KEEP OUT AREA DIMENSIONS 4.00(2X) Antenna Outline 2118908-1 10.00(2X) Dimension: mm Diagrams is not into scale Keep Out Area 4.00(2X) 10.00(2X) Dimension: mm Diagrams is not into scale DATA AND DEVICES /// WI-FI 6/ 6E TRIPLE BAND ON BOARD ANTENNA Wi-Fi 6/ 6E TRIPLE BAND ON BOARD ANTENNA Standard Antenna Solutions PACKAGING 2118908-1 (BULK) 2118908-2 (TAPE & REEL) TE TECHNICAL SUPPORT CENTER USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 For phone numbers in other countries, go to te.com/support-center te.com TE Connectivity, TE Connectivity (logo) are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2020 TE Connectivity Ltd. family of companies All Rights Reserved. 06/2022 DATA AND DEVICES /// WI-FI 6/ 6E TRIPLE BAND ON BOARD ANTENNA