3-1542003-3

8 7 6 4 5 3 2 1 REVISION(S) LTR A 1-FINS HEAT SINK: 1.375 DIA. 0.255 HT. 2 DESCRIPTION ECR-06-007721 INIT APP'D E.T 3/29/06 C.W 3/29/06 D D 1 3 4-LEGS LOW PROFILE CLIP SIZE: 35mm NOTE: 1. MATERIAL: HEAT SINK: ALUM. (BLACK ANODIZE) CLIP: BLACK PEI (UL94-VO) 2. SPECIFICATION OF MAXIMUM LOAD ON THE BGA PACKAGE SHOULD BE IDENIFIED BY THE USER BEFORE THE HEATSINK APPLICATION. HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE. .012±.002 C BARE DIE PACKAGE: 2.0 INCH - LB TORQUE = 8.1 LBS FORCE 2.5 INCH - LB TORQUE =10.1 LBS FORCE C FULL SIZE LID PACKAGE: 2.0 INCH - LB TORQUE = 6.9 LBS FORCE 2.5 INCH - LB TORQUE = 8.7 LBS FORCE DETAIL A SCALE= 6X 3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1. 4. RoHS COMPLIANT AND CERTIFIED. 1.375±.020 B .135 .125 MAX .255 B A 1" - 27 UNS - 2A THREAD B .108 ±.005 1.384 LIP LEG 1.390 1.474 SECTION B-B Power 8 7 ° C/W @ ° C/W @ ° C/W @ ° C/W @ Ambient 200 LFM 400 LFM 600 LFM 5 Watts 10 Watts 12.77 11.46 8.19 8.05 5.26 5.21 4.31 4.51 15 Watts 10.60 7.93 5.45 4.41 ITEM DESCRIPTION QTY 1 MOUNTING CLIP 1 2 HEAT SINK 1 3 INTERFACE 1 DO NOT SCALE A B .238±.005 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: .XX .XXX .XXXX ANGLES . DRAWN BY: DATE ENGINEER: . FILENAME SEE NOTE DATE 01/13/04 S.DELPRETE . SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE MATERIAL: 01/13/04 E.TAO CUSTOMER DRAWING PROJECT SYSTEM CONFIDENTIAL PROPERTY OF TYCO ELECTRONICS. NOT TO BE DISCLOSED TO OTHERS. REPRODUCED OR USED FOR ANY PURPOSES EXCEPT AS AUTHORIZED IN WRITING BY AN AUTHORIZED OFFICIAL OF TYCO. MUST BE RETURNED TO TYCO ON DEMAND, ON COMPLETION OF ORDERS OR OTHER PURPOSES FOR WHICH LENT. DIMENSONS ARE IN: FINISH: INCHES SEE NOTE SCALE: 1.5:1 SIZE: TNIRD ANGLE PROJECTION A A TITLE: 35mm LOW PROFILE HEATSINK ASSEMBLY (HTS559-P) PART NO: DWG. NO. 3-1542003-3 C-3-1542003-3 SHEET: 1 OF 1 REV: A