F11734-000

Application Equipment HL1910E and HL2010E Steinel® General Purpose Hot-Air Heating Tool Products Facts Light weight Easy, quiet operation n Precise variable temperature n 1500 watts n Reflectors and stand (optional) n Wide variety of applications n CE approved (230 V only) n n Applications Used for installing heatshrinkable tubings and molded parts, SolderSleeve devices, and SolderTacts contacts. Specifications Steinel® (120 V) power requirement Steinel® (230 V) power requirement Rated heater element power Weight Cord length Typical temperature output* 120 V, 60 Hz, 12.5 A 230 V, 50 Hz, 8.7 A 110V - 2000 W/230V-2000W 920 g [2.0 lb] Approx. 3 m [approx. 8 ft] 49°C to 593°C [120°F to 1100°F] *The Steinel® heating tool is equipped with a variable temperature control. The correct temperature setting of the tool will vary, depending on application characteristics. The recommended procedure is to experiment with scrap materials and start with the lowest temperature range. 10 Available in: Americas Europe Asia Pacific ■ ■ ■ Application Equipment Steinel is a trademark of Steinel GmbH. 10-13 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Application Equipment HL1910EE and HL2010E Steinel® General Purpose Hot-Air Heating Tool (Continued) Ordering Information Model /Description HL1910E-KIT-120 HL2010E-KIT-120 HL1910E-230V-EURO HL1910E-230V-UK HL1910E-KIT-230V-EURO HL2010E-230V-EURO HL2010E-230V-UK HL2010E-KIT-230V-EURO Part No. CJ2086-000 CJ2087-000 F30529-000 F11734-000 A93538-000 C99451-000 A22932-000 A23120-000 Accessories and Replacement Parts SolderSleeve reflector HL1802E-ADAPT for use with PR reflectors*** Tubing reflector Bench stand 9-mm-diameter reduction nozzle Description HL1802E-074616 HL1802E-ADAPT-PR HL1802E-070519 HL2010E-BENCH-STD HL1802E-070618 Part No. 832011-000 444817-000 022611-000 CJ2085-000 930321-000 **Complete with SolderSleeve reflector. ***Selection of PR reflectors can be found in CV-1981/CV-1983 section. Accessories Clip-on bench stand (P/N CJ2085-000) for heating tool. Must be ordered separately. SolderSleeve reflector (P/N 832011-000) for SolderSleeve terminators, SolderTacts contacts, and small-diameter tubing. Comes standard with Steinel® heating tool. Optional tubing reflector (P/N 022611-000) for larger tubing and molded parts. Must be ordered separately. Steinel is a trademark of Steinel GmbH. 10-14 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015