High Value / High Voltage Resistors
Type HB Series
Key Features
I
Up to 15kV Element
Voltage
• Unique specification
for the most demanding applications
I
High Ratio of Size
to Power
• The solution to your
PCB population
problems
I
1kW to 1GW
• Coupled with 1%
tolerance gives
ultimate design
flexibility
I
Established Product
with Proven Reliability
I
Low Inductance
• For the fastest
switching speeds
Applications
I
High Voltage
I
Voltage Divider
I
Surge
I
Filter
I
Balancing
I
Inrush Limiting
TE Connectivity (TE) is a leading supplier of standard and custom designed high
value/high voltage resistors for high voltage, industrial, control, medical and
general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or
radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and
30kV to order. The resistors are made from quality materials for optimum reliability and
stability. TE can test resistors to conform to relevant international, MIL or customer
specifications. TE is happy to advise on the use of resistors for high frequency
applications and to supply information for high voltage use.
Characteristics - Electrical
Power Dissipation - Power @ 20°C (W):
@ 70°C:
Ohmic Value - Min (Ohms):
Max:
Resistance Tolerance (%) (Tighter By Request):
Maximum Working Voltage - DC or ACrms (Volts):
Insulation Resistance - Epoxy Coated, @500V dc (Ohms):
Load Stability - 1000hr’s @ 70°C (%):
Temp. Rapid Change - -55°C to 125°C for 5 cycles (ΔR):
Endurance - 1000 Hours @ 200°C (ΔR):
Resistance to Soldering Heat - 350°C for 3.5seconds (ΔR):
Temperature Coefficient (ppm/°C):
(±20ppm/°C available to special order)
Voltage Coefficient:
HBA
0.8
0.4
1K
120M
1%, 2%, 5%
1kV
>106MΩ
±0.5%
±0.1%
106MΩ
±0.5%
±0.1%
106MΩ
±0.5%
±0.1%
很抱歉,暂时无法提供与“HB1300MFZRE”相匹配的价格&库存,您可以联系我们找货
免费人工找货