TX30AC00-2207

TINEL LOCK RING 3 CODE 30 - TINEL-LOCK BACKSHELL TXR30AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR30AB00-1206). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-C-28840, M28840/10, /11, /14 & /16 7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DRAWN K.WINCZURA DATE CHECKED 15/12/2014 APPROVED K.SHEPPARD 16/12/2014 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 15/12/2014 01/10/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-002400 G REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE 18/02/2015 01/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H . S MI T H H.SMITH TITLE: TINEL LOCK BACKSHELL ASSY USED ON: MIL-DTL-28840 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR30 G 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 24,50 `0,50 XXXX XXXX ØB A THREAD ØY ØZ ØS ØK A THREAD ØB PART MARK HERE 26,50 SILICONE O-RING 30,00 PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 5 STRAIGHT BACKSHELL - TYPE 2 C 24,50 `0,50 F D G 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 W H 24,50 `0,50 M E J T 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 W 24,50 `0,50 M E J T H DRAWN K.WINCZURA DATE 15/12/2014 APPROVED K.SHEPPARD 16/12/2014 H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 15/12/2014 CHECKED APPROVED 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE 01/10/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-002400 G REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE 18/02/2015 01/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H . S MI T H H.SMITH 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL LOCK BACKSHELL ASSY USED ON: MIL-DTL-28840 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR30 G 2 MODIFICATION S BACKSHELL - TYPE 1 TABLE 1 ORDER NUMBER 10 12 14 16 18 22 24 28 32 TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 SHELL SIZE 6 A THREAD COM'L / MIL 11 / A 3/4 - 20UNEF 13 / B 7/8 - 20UNEF 15 / C 1 - 20UNEF 17 / D 1 1/8 - 18 UNEF 19 / E 1 1/4 - 18UNEF 23 / F 1 7/16 -18UNEF 1 9/16 -18UNEF 25 / G 29 / H 1 7/8 - 16UN 33 / J 2 1/16 -16UN ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 DRAWN K.WINCZURA ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 DATE 15/12/2014 APPROVED K.SHEPPARD 16/12/2014 H.SMITH 01/10/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-002400 G REVISED PER ECO-15-013980 ØK MAX NA NA 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 ØK MAX 7 NA NA 24,6 24,6 28,3 32,4 35,6 38,5 41,7 43,9 47,0 50,0 56,0 3RD ANGLE PROJECTION NOT TO SCALE 15/12/2014 CHECKED APPROVED ØY ± 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 MAX ENTRY 05 08 10 12 14 16 18 22 24 ØB MAX 26,5 29,7 31,3 35,5 38,7 43,6 47,2 55,2 60,5 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE 18/02/2015 01/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H . S MI T H H.SMITH 24,50 `0,50 SELF-LOCKING MECHANISM A THREAD ØK 7 ØB 7 SELF-LOCKING MECHANISM A THREAD ØB 7 SELF-LOCKING MECHANISM BACKSHELL - TYPE 2 C ±0,5 19,7 20,8 21,5 21,5 22,0 22,6 23,6 25,7 26,7 F ±0,5 NA NA 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 D ±0,5 27,5 28,0 29,0 29,7 30,5 31,1 32,1 35,3 38,1 G ±0,5 NA NA 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 W ±0,5 31,2 34,3 36,7 39,5 42,8 48,2 51,0 60,3 63,4 H ±0,5 NA NA 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 T ±0,5 22,4 23,3 24,2 26,2 25,3 28,2 31,5 37,0 38,5 M ±0,5 NA NA 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE W T E ±0,5 ±0,5 ±0,5 29,6 22,4 28,2 32,3 23,3 29,7 34,4 24,2 31,2 37,7 26,2 32,9 38,6 25,3 34,5 44,4 28,2 37,6 48,9 31,5 39,1 57,0 37,0 45,3 60,5 38,5 47,8 E ±0,5 27,95 29,45 31,00 32,70 34,25 37,40 38,90 45,30 47,80 J ±0,5 NA NA 27,95 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 42,00 46,00 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE H M J ±0,5 ±0,5 ±0,5 NA NA NA NA NA NA 24,3 17,2 28,2 24,3 17,2 28,2 28,3 19,4 29,7 31,1 21,0 31,2 34,2 22,8 32,9 38,5 25,3 34,5 40,7 26,1 36,1 43,7 27,6 37,6 46,4 29,1 39,1 50,0 31,0 42,0 53,5 33,0 46,0 TITLE: TINEL LOCK BACKSHELL ASSY USED ON: MIL-DTL-28840 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR30 G 3