TXR47AB00-2412AI

TINEL LOCK RING 3 CODE 47 - TINEL-LOCK BACKSHELL TXR47AB00-1608AI SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR47AB00-1206). RING SHALL BEAR NO MARKING. 5. WHEN ENTRY SIZE EXCEEDS "MAX ENTRY", A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO VG96912 CONNECTORS, FOR EXAMPLE AMPHENOL SJT SERIES. If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 10/06/2015 CHECKED 10/06/2015 APPROVED K.SHEPPARD 26/06/2015 APPROVED H.SMITH 07/07/2015 REVISIONS LTR DESCRIPTION D REVISED PER DCR R060313 E REVISED PER ECO-15-009991 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 22/05/2006 APPROVED MPIOZET 07/07/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL LOCK BACKSHELL ASSY USED ON: VG96912 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR47 E 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 16,80 ` 0,50 XXXX A THREAD ØK ØY ØZ ØS XXXX PART MARK HERE ØB 6,20 A THREAD ØB 26,50 26,80 SILICONE O-RING PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 5 STRAIGHT BACKSHELL - TYPE 2 C F 16,80 `0,50 D G 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 H W 16,80 `0,50 T J E M If this document is printed it becomes uncontrolled. Check for the latest revision 90° BACKSHELL - TYPE 1 H 90° BACKSHELL - TYPE 2 W 16,80 ` 0,50 M J E T 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DATE DRAWN K.WINCZURA 10/06/2015 CHECKED 10/06/2015 APPROVED K.SHEPPARD 26/06/2015 APPROVED H.SMITH 07/07/2015 REVISIONS LTR DESCRIPTION D REVISED PER DCR R060313 E REVISED PER ECO-15-009991 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 22/05/2006 APPROVED MPIOZET 07/07/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL LOCK BACKSHELL ASSY USED ON: VG96912 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR47 E 2 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ORDER NO. 08 10 12 14 16 18 20 22 24 SHELL SIZE 08 10 12 14 16 18 20 22 24 A THREAD 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1 1/16-18UNEF 1 3/16-18UNEF 1 5/16-18UNEF 1 7/16-18UNEF ØB MAX 18,3 21,5 24,5 27,8 30,8 34,1 37,3 40,5 43,7 MAX ENTRY 04 07 08 10 12 14 16 18 20 C ±0,5 16,4 17,2 17,6 18,5 19,2 19,6 20,4 20,8 21,7 D ±0,5 26,8 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 W ±0,5 21,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 T ±0,5 14,0 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 E ±0,5 26,2 28,0 29,5 31,0 32,7 34,3 35,8 37,4 38,9 W ±0,5 21,3 24,4 28,4 31,2 34,3 38,6 40,8 43,8 46,5 T ±0,5 16,4 17,3 19,5 21,0 22,8 25,3 26,1 27,6 29,1 E ±0,5 26,4 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 ØY ± 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 ØK MAX NA 21,0 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 F ±0,5 NA 12,5 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 G ±0,5 NA 27,5 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 H ±0,5 NA 24,0 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 M ±0,5 NA 15,5 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 J ±0,5 NA 28,0 28,0 28,0 29,5 31,0 32,7 34,3 35,8 37,4 38,9 42,0 46,0 H ±0,5 NA 24,3 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 M ±0,5 NA 17,2 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 J ±0,5 NA 28,2 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 10/06/2015 CHECKED 10/06/2015 APPROVED K.SHEPPARD 26/06/2015 APPROVED H.SMITH 07/07/2015 REVISIONS LTR DESCRIPTION D REVISED PER DCR R060313 E REVISED PER ECO-15-009991 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 22/05/2006 APPROVED MPIOZET 07/07/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL LOCK BACKSHELL ASSY USED ON: VG96912 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR47 E 3