OVSA1ABLCR8

OVSA1xBLCR8 Series Features:      High intensity with low power consumption PLCC4 packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Dimensions: 3.2 x 2.7 x 1.95 mm 60° viewing angle Description: The OVSA1xBLCR8 series is designed for focused, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications:       Traffic lights Signal and symbol luminaire Mono-color indicators Backlighting (LCD, switches, displays, illuminated advertising) Interior automotive lighting (instrumentation clusters) Safety marker lights (steps, exit ways) Amber Intensity Typ. mcd 5000 Water Clear Red 3700 Water Clear Part Number Material Emitted Color OVSA1ABLCR8 AlInGaP OVSA1SBLCR8 AllnGaP Lens Color DIMENSIONS ARE IN INCHES AND [ MM ] 5a RoHS Moisture General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Issue B 11/2016 Page 1 OVSA1xBLCR8 Series Electrical Specifications Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5V Continuous Forward Current 70 mA Peak Forward Current (Pulse width ≤10 msec, duty cycle ≤10%) 200 mA Power Dissipation 210 mW Thermal Resistance Junction to Solder 1. 150° C/W Electrostatic Discharge Classification (MIL-STD-883E) Class 2 LED Junction Temperature 110° C Lead Soldering Temperature 250° C / 10 seconds Note: 1. Rth test condition: Mounted on PC board FR 4 (pad size≥16 mm2) Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX IV Luminous Intensity Red 2240 3700 VF Forward Voltage Forward Voltage ---- 2.5 IR Reverse Current Reverse Current ---- λD Dominant Wavelength Red 618 2Θ½H-H 50% Power Angle 50% Power Angle General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc UNITS TEST CONDITIONS mcd IF = 50 mA 3.0 V IF = 50 mA ---- 10 µA VR = 5 V 624 630 nm IF = 50 mA deg IF = 50 mA 60 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Issue B 11/2016 Page 2 OVSA1xBLCR8 Series Standard Bins LEDs are sorted to luminous intensity (IV) and dominant wavelength (nm) bins listed below. Each reel consists of a single intensity bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Luminous Intensity (IV ) @ 50mA Dominant Wavelength (nm) RED: OVSA1SBLCR8 IV Code Min (mcd) RED: OVSA1SBLCR8 Max (mcd) Xb 2240 2800 Ya 2800 3550 Yb 3550 4500 Z0 4500 5600 AMBER: OVSA1ABLCR8 IV Code Min (mcd) nm Code Min Max RA 618 630 AMBER: OVSA1ABLCR8 Max (mcd) nm Code Min Max Yb 3550 4500 A2 584 587 Z0 4500 5600 A3 587 590 A0 5600 7100 A4 590 593 B0 7100 9000 A5 593 596 A6 596 599 Reflow Solder Profile Solder = Lead-Free Average ramp-up rate = 4°C / sec. max Preheat temperature: 150 - 220°C Preheat time: 120 sec. max. Ramp-down rate = 6°C / sec. max. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc Peak temperature = 250°C max. Time within 5°C of actual peak temperature = 10 sec. max Duration above 217°C is 60 sec. max TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Issue B 11/2016 Page 3 OVSA1xBLCR8 Series Typical Electro-Optical Characteristics Curves for OVSA1SBLCR8 (Red) & OVSA1ABLCR8 (Amber) Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Wavelength Angular Distribution General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc Relative Luminous Intensity vs. Forward Current Red & Amber Maximum Forward DC Current vs. Ambient Red & Amber Reverse Current vs. Reverse Voltage TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Issue B 11/2016 Page 4 OVSA1xBLCR8 Series Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded Quantity 700 pieces per reel Moisture Resistant Packaging: General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Issue B 11/2016 Page 5